en to en_CA translation catalogue (3118 entries)

en: Can't read from or write to the XML root directory in the address "%s"
en_CA: Cannot read from or write to the XML root directory in the address "%s"

en: Can't overwrite existing read-only value
en_CA: Cannot overwrite existing read-only value

en: Can't write to file `%s': %s
en_CA: Cannot write to file `%s': %s

en: Error while parsing options: %s.
    Run '%s --help' to see a full list of available command line options.
en_CA: Error while parsing options: %s.
    Run '%s --help' to see a full list of available command-line options.

en: Can't remove file %s: %s
en_CA: Cannot remove file %s: %s

en: Please contact your system administrator to resolve the following problem:
    No configuration sources in the configuration file "%s"; this means that preferences and other settings can't be saved. %s%s
en_CA: Please contact your system administrator to resolve the following problem:
    No configuration sources in the configuration file "%s"; this means that preferences and other settings cannot be saved. %s%s

en: Can't add notifications to a local configuration source
en_CA: Cannot add notifications to a local configuration source

en: Can't have two slashes (/) in a row
en_CA: Cannot have two slashes (/) in a row

en: Can't have a period (.) right after a slash (/)
en_CA: Cannot have a period (.) right after a slash (/)

note: We want to stay alive but do nothing, because otherwise every request would result in another failed gconfd being spawned.
en: No configuration sources in the source path, configuration won't be saved; edit %s%s
en_CA: No configuration sources in the source path; configuration will not be saved. Edit %s%s

en: No config source addresses successfully resolved, can't load or store config data
en_CA: No config source addresses successfully resolved, cannot load or store config data

en: Directory %s has a problem, gconfd can't use it
en_CA: Directory %s has a problem. gconfd cannot use it

en: Failed to write byte to pipe file descriptor %d so client program may hang: %s
en_CA: Failed to write byte to pipe file descriptor %d; client program may hang: %s

en: Failed to get lock for daemon, exiting: %s
en_CA: Failed to get lock for daemon; exiting: %s

en: Can't get and set/unset simultaneously
en_CA: Cannot get and set/unset simultaneously

en: Can't set and get/unset simultaneously
en_CA: Cannot set and get/unset simultaneously

en: Can't get type and set/unset simultaneously
en_CA: Cannot get type and set/unset simultaneously

en: Can't use --all-entries with --get or --set
en_CA: Cannot use --all-entries with --get or --set

en: Can't use --all-dirs with --get or --set
en_CA: Cannot use --all-dirs with --get or --set

en: _Dial Up Connections
en_CA: _Dial-Up Connections

en: Could not find the authentication dialog for VPN connection type '%s'. Contact your system administrator.
en_CA: Could not find the authentication dialogue for VPN connection type '%s'. Contact your system administrator.

en: There was a problem launching the authentication dialog for VPN connection type '%s'. Contact your system administrator.
en_CA: There was a problem launching the authentication dialogue for VPN connection type '%s'. Contact your system administrator.

en: <span weight="bold" size="larger">Wireless Network Login Confirmation</span>
    
    You have chosen to log in to the wireless network '%s'.  If you are sure that this wireless network is secure, click the checkbox below and NetworkManager will not require confirmation on subsequent log ins.
en_CA: <span weight="bold" size="larger">Wireless Network Login Confirmation</span>
    
    You have chosen to log in to the wireless network '%s'.  If you are sure that this wireless network is secure, click the checkbox below and NetworkManager will not require confirmation on subsequent logins.

en: _Don't remind me again
en_CA: _Do not remind me again

en: Choose which type of VPN connection you wish to create.
en_CA: Choose the type of VPN connection you wish to create.

en: This assistant will guide you through the creation of a connection to a Virtual Private Network (VPN).
    
    It will require some information, such as IP addresses and secrets.  Please see your system administrator to obtain this information.
en_CA: This assistant will guide you through creating a connection to a Virtual Private Network (VPN).
    
    It will require some information, such as IP addresses and secrets.  Please see your system administrator to obtain this information.

en: unable to create netlink socket for monitoring wired ethernet devices - %s
en_CA: Unable to create netlink socket for monitoring wired ethernet devices - %s

en: unable to bind to netlink socket for monitoring wired ethernet devices - %s
en_CA: Unable to bind to netlink socket for monitoring wired ethernet devices - %s

en: operation took too long
en_CA: Operation took too long

en: received data from wrong type of sender
en_CA: Received data from wrong type of sender

en: received data from unexpected sender
en_CA: Received data from unexpected sender

en: too much data was sent over socket and some of it was lost
en_CA: Too much data was sent over socket and some of it was lost

en: Accerciser could not see the applications on your desktop.You must enable desktop accessibility to fix this problem.Do you want to enable it now?
en_CA: Accerciser could not see the applications on your desktop.  You must enable desktop accessibility to fix this problem.  Do you want to enable it now?

en: The New BSD License See the COPYING and NOTICE files for details.
en_CA: The New BSD Licence; See the COPYING and NOTICE files for details.

en: License:
en_CA: Licence:

note: Translators: this string is the name of a game of patience. If there is an established standard name for this game in your locale, use that; otherwise you can translate this string freely, literally, or not at all, at your option.
en: Kings Audience
en_CA: King's Audience

note: Translators: this string is the name of a game of patience. If there is an established standard name for this game in your locale, use that; otherwise you can translate this string freely, literally, or not at all, at your option.
en: Will O The Wisp
en_CA: Will O' The Wisp

note: %s is replaced with the name of the game in gnome-games.
en: %s is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version %d of the License, or (at your option) any later version.
en_CA: %s is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version %d of the Licence, or (at your option) any later version.

en: %s is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: %s is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: Unknown color
en_CA: Unknown colour

en: Move a King on to the empty tableau slot
en_CA: Move a King onto the empty tableau slot

en: Alternating colors
en_CA: Alternating colours

en: You should have received a copy of the GNU General Public License along with %s; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
en_CA: You should have received a copy of the GNU General Public Licence along with %s; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

note: This string should be replaced with the name of the translator
en: Jeffrey Stedfast
en_CA: Adam Weinberger <adamw@gnome.org>

en: Demangle c++ symbol names
en_CA: Demangle C++ symbol names

en: Only show user activatable plugins
en_CA: Only show user-activatable plugins

en: Command canceled by user
en_CA: Command cancellled by user

en: Berkeley Software Distribution License (BSD)
en_CA: Berkeley Software Distribution Licence (BSD)

en: General Public License (GPL)
en_CA: General Public Licence (GPL)

en: Lesser General Public License (LGPL)
en_CA: Lesser General Public Licence (LGPL)

en: No License
en_CA: No Licence

note: Display label short-cut
en: Continue the execution of the program
en_CA: Continue execution of the program

en: Add License Information:
en_CA: Add Licence Information:

en: BSD Public License
en_CA: BSD Public Licence

en: There was an error whilst launching the debugger.
en_CA: There was an error launching the debugger.

en: Error whilst signaling the process.
en_CA: Error while signalling the process.

en: Indentation parameters
en_CA: Indentation parametres

en: Message colors
en_CA: Message colours

en: No license
en_CA: No licence

en: Select code license
en_CA: Select code licence

en: Program Parameters
en_CA: Program Parametres

en: Program Parameters…
en_CA: Program Parametres…

note: #-#-#-#-#  85 (gnome-commander)  #-#-#-#-# Color scheme
en: Color scheme:
en_CA: Colour scheme:

en: Authentication canceled
en_CA: Authentication cancelled

en: Ask the user to get additional parameters
en_CA: Ask the user to get additional parametres

en: dialog1
en_CA: dialogue1

en: color chooser
en_CA: colour chooser

en: dateeditor
en_CA: date editor

en: dialog
en_CA: dialogue

en: Is used to notify that the parent has changed
en_CA: Used to notify that the parent has changed

en: Is used to notify that the value has changed
en_CA: Used to notify that the value has changed

en: Is used to notify that the table caption has changed; this property should not be used. accessible-table-caption-object should be used instead
en_CA: Used to notify that the table caption has changed. This property should not be used; accessible-table-caption-object should be used instead

en: Is used to notify that the table column header has changed
en_CA: Used to notify that the table column header has changed

en: Is used to notify that the table column description has changed
en_CA: Used to notify that the table column description has changed

en: Is used to notify that the table row header has changed
en_CA: Used to notify that the table row header has changed

en: Is used to notify that the table row description has changed
en_CA: Used to notify that the table row description has changed

en: Is used to notify that the table summary has changed
en_CA: Used to notify that the table summary has changed

en: Is used to notify that the table caption has changed
en_CA: Used to notify that the table caption has changed

en: Trans Butylen
en_CA: Trans Butylene

en: Canceled.
en_CA: Cancelled.

note: i18n: file: src/enginecolorswidget.ui:24 i18n: ectx: property (text), widget (QLabel, label)
en: Color by:
en_CA: Colour by:

note: i18n: file: src/mainwindow.ui:364 i18n: ectx: property (text), widget (QToolBar, toolBar)
en: Set &Background Color...
en_CA: Set &Background Colour...

note: #-#-#-#-#  13 (avogadro)  #-#-#-#-# i18n: file: src/mainwindow.ui:426 i18n: ectx: property (text), widget (QToolBar, toolBar)
en: Center
en_CA: Centre

note: i18n: file: src/mainwindow.ui:562 i18n: ectx: property (text), widget (QToolBar, toolBar)
en: Plugin Manager...
en_CA: Plug-in Manager...

en: Color by Index
en_CA: Colour by Index

en: Color by Index (red, orange, yellow, green, blue, violet).
en_CA: Colour by Index (red, orange, yellow, green, blue, violet).

en: Color by Partial Charge
en_CA: Colour by Partial Charge

en: Color by atomic partial charge (blue = positive, red = negative.
en_CA: Colour by atomic partial charge (blue = positive, red = negative.

note: #-#-#-#-#  35 (gtkhtml)  #-#-#-#-# "Custom" color - we'll pop up a GnomeColorPicker #-#-#-#-#  138 (gtkhtml)  #-#-#-#-# #-#-#-#-#  220 (gtkhtml)  #-#-#-#-#
en: Custom Color:
en_CA: Custom Colour:

en: Custom Color
en_CA: Custom Colour

en: Set custom colors for objects
en_CA: Set custom colours for objects

en: Color by Distance
en_CA: Colour by Distance

en: Color by distance from the first atom.
en_CA: Colour by distance from the first atom.

en: Color by Element
en_CA: Colour by Element

en: Color by Element (carbon = grey, oxygen = red, ...).
en_CA: Colour by Element (carbon = grey, oxygen = red, ...).

en: Color by Residue
en_CA: Colour by Residue

en: Color by Residue (amino acid type, hydrophobicity, ...
en_CA: Colour by Residue (amino acid type, hydrophobicity, ...

en: Renders color scale for gradients
en_CA: Renders colour scale for gradients

en: Renders rings with colored planes
en_CA: Renders rings with coloured planes

en: Windows for displaying atom, bond, angle and torsion properties. It also includes a cartesian coordinate editor.
en_CA: Windows for displaying atom, bond, angle and torsion properties. It also includes a Cartesian coordinate editor.

en: Align Molecules
    
    Left Mouse: 	Select up to two atoms.
    	The first atom is centered at the origin.
    	The second atom is aligned to the selected axis.
    Right Mouse: 	Reset alignment.
en_CA: Align Molecules
    
    Left Mouse: 	Select up to two atoms.
    	The first atom is centred at the origin.
    	The second atom is aligned to the selected axis.
    Right Mouse: 	Reset alignment.

note: i18n: file: src/colors/residuecolorsettings.ui:13 i18n: ectx: property (windowTitle), widget (QWidget, ResidueColorSettings)
en: Residue Color Settings
en_CA: Residue Colour Settings

note: i18n: file: src/colors/residuecolorsettings.ui:19 i18n: ectx: property (text), widget (QLabel, label)
en: Color residues by:
en_CA: Colour residues by:

note: i18n: file: src/colors/residuecolorsettings.ui:27 i18n: ectx: property (text), item, widget (QComboBox, colorStyleComboBox)
en: Amino Colors
en_CA: Amino Colours

note: i18n: file: src/colors/residuecolorsettings.ui:32 i18n: ectx: property (text), item, widget (QComboBox, colorStyleComboBox)
en: Shapely Colors
en_CA: Shapely Colours

note: i18n: file: src/engines/surfacesettingswidget.ui:140 i18n: ectx: property (text), item, widget (QComboBox, colorCombo)
en: Selected Colors
en_CA: Selected Colours

note: i18n: file: src/engines/surfacesettingswidget.ui:145 i18n: ectx: property (text), item, widget (QComboBox, colorCombo)
en: Mapped Colors
en_CA: Mapped Colours

note: #-#-#-#-#  14 (avogadro)  #-#-#-#-# i18n: file: src/engines/surfacesettingswidget.ui:153 i18n: ectx: property (text), widget (QLabel, colorLabel)
en: Colors:
en_CA: Colours:

note: i18n: file: src/extensions/quantuminput/gamessinputdialog.ui:1554 i18n: ectx: property (text), item, widget (QComboBox, dataCoordinateCombo)
en: Unique cartesian Coords.
en_CA: Unique Cartesian Coords.

note: i18n: file: src/extensions/quantuminput/gamessinputdialog.ui:2548 i18n: ectx: property (text), widget (QRadioButton, mp2TwoRadio)
en: Two Phase Bin Sort
en_CA: Two-Phase Bin Sort

note: i18n: file: src/extensions/quantuminput/gamessinputdialog.ui:2786 i18n: ectx: property (text), widget (QLabel, label_51)
en: Optimization Method:
en_CA: Optimisation Method:

note: i18n: file: src/extensions/spectra/spectradialog.ui:20 i18n: ectx: property (windowTitle), widget (QDialog, SpectraDialog)
en: Spectra Visualization
en_CA: Spectra Visualisation

note: i18n: file: src/extensions/spectra/spectradialog.ui:628 i18n: ectx: property (toolTip), widget (QCheckBox, cb_imageFontAdjust)
en: Use an optimized value for the font size instead of the scheme-specified value (screen to image point sizes don't translate well!)
en_CA: Use an optimised value for the font size instead of the scheme-specified value (screen to image point sizes don't translate well!)

en: Snapshots folder is not valid !
en_CA: Snapshots folder is not valid!

en: You must select at least one folder to backup !
en_CA: You must select at least one folder to backup!

en: You can't include backup folder !
en_CA: You can't include backup folder!

en: You can't include a backup sub-folder !
en_CA: You can't include a backup sub-folder!

en: %s is not a folder !
en_CA: %s is not a folder!

en: Can't write to: %s
    Are you sure you have write access ?
en_CA: Can't write to: %s
    Are you sure you have write access?

en: Profile "%s" already exists !
en_CA: Profile "%s" already exists!

en: You can't remove the last profile !
en_CA: You can't remove the last profile!

en: Can't find snapshots folder.
    If it is on a removable drive please plug it.
en_CA: Can't find snapshots folder.
    If it is on a removable drive, please plug it in.

en: Save permission ...
en_CA: Save permission...

en: Can't find snapshots folder.
    If it is on a removable drive please plug it and then press OK
en_CA: Can't find snapshots folder.
    If it is on a removable drive, please plug it in and then press OK

en: Are you sure you want to remove the snapshot:
    <b>%s</b>
en_CA: Are you sure you want to remove this snapshot?
    <b>%s</b>?

en: Are you sure you want to change snapshots folder ?
en_CA: Are you sure you want to change snapshots folder?

en: Are you sure you want to delete the profile "%s" ?
en_CA: Are you sure you want to delete the profile "%s"?

en: Exclude patterns can't contain ':' char !
en_CA: Exclude patterns can't contain ':' char!

en: Are you sure you want to remove the snapshot:
    %s
en_CA: Are you sure you want to remove the snapshot
    "%s"?

en: combined signing and encryption is only defined for RFC 2440
en_CA: Combined signing and encryption is only defined for RFC 2440

en: %s: insufficient validity for uid %s
en_CA: %s: insufficient validity for UID %s

en: No path found for mailbox "%s", using "%s"
en_CA: No path found for mailbox "%s"; using "%s"

en: Message rename error
en_CA: Error renaming message

en: _Pass Phrase:
en_CA: _Passphrase:

en: C_ertificate Pass Phrase:
en_CA: C_ertificate Passphrase:

en: Sp_lit message larger than
en_CA: Sp_lit messages larger than

en:  Whoever provides your email account should be able to give you the following information (if you have a Network Administrator, they may already have set this up for you):
en_CA:  Whomever provides your email account should be able to give you the following information (if you have a Network Administrator, they may already have set this up for you):

en: The signature check and removal of the OpenPGP armor cannot be performed because this message is displayed more than once.
en_CA: The signature check and removal of the OpenPGP armour cannot be performed because this message is displayed more than once.

en: Nick Name
en_CA: Nickname

en: A filter run dialog is open.Close it before you can modify filters.
en_CA: A filter run dialogue is open.Close it before you can modify filters.

en: There are opened filter run dialogs, close them before you can modify filters.
en_CA: There are opened filter run dialogues, close them before you can modify filters.

en: The filters dialog is opened, close it before you can run filters on any mailbox
en_CA: The filters dialogue is opened, close it before you can run filters on any mailbox

en: Balsa closes files and connections. Please wait...
en_CA: Balsa is closing files and connections. Please wait...

en: Prints number unread and unsent messages
en_CA: Prints number of unread and unsent messages

en: Prefer text/plain over html
en_CA: Prefer text/plain over HTML

en: Display Progress Dialog
en_CA: Display Progress Dialogue

en: Message Colors
en_CA: Message Colours

en: Quote level %d color
en_CA: Quote level %d colour

en: Link Color
en_CA: Link Colour

en: Hyperlink color
en_CA: Hyperlink colour

en: Invalid or incomplete address label color
en_CA: Invalid or incomplete address label colour

en: Show dialog
en_CA: Show dialogue

en: Balsa could not find font "%s".
    Use the "Fonts" page on the "Print message" dialog to change it.
en_CA: Balsa could not find font "%s".
    Use the "Fonts" page on the "Print message" dialogue to change it.

en: Save this address and close the dialog?
en_CA: Save this address and close the dialogue?

en: Copy and rename music to banshee music library directory when importing
en_CA: Copy and rename music to Banshee's Music Library directory when importing

en: Enabled Special Keys (Multimedia Keys) support for Play/Pause/Next/Previous; works with mappings set through Gnome Shortcuts capplet
en_CA: Enabled Special Keys (Multimedia Keys) support for Play/Pause/Next/Previous; works with mappings set through GNOME Shortcuts capplet

en: True if the advanced expander should be expanded in the track properties dialog, false if it should be closed
en_CA: True if the advanced expander should be expanded in the track properties dialogue, false if it should be closed

en: Mime Type:
en_CA: MIME Type:

en: Music Management and Playback for Gnome.
en_CA: Music Management and Playback for GNOME.

en: Synchronizing your Device, Please Wait...
en_CA: Synchronizing your Device. Please Wait...

en: An available, working network connection will be assumed
en_CA: An available working network connection will be assumed

en: VLC is a highly portable multimedia player for various audio and video formats (MP3, AAC, OGG, FLAC, WMA, etc.) See http://videolan.org/vlc/
en_CA: VLC is a highly portable multimedia player for various audio and video formats (MP3, AAC, OGG, FLAC, WMA, etc.). See http://videolan.org/vlc/

en: Login to Music Share
en_CA: Log in to Music Share

en: Invalid parameter in command
en_CA: Invalid parametre in command

en: _Color
en_CA: _Colour

en: Solid color
en_CA: Solid colour

en: _Text Color
en_CA: _Text Colour

en: Text color
en_CA: Text colour

en: Pick a Color
en_CA: Pick a Colour

en: Brasero is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Brasero is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Brasero is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Brasero is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Brasero; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
en_CA: You should have received a copy of the GNU General Public Licence along with Brasero; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

en: Send changes (vs parent branch) to a mail address or file
en_CA: Send changes (vs. parent branch) to a mail address or file

en: Tune the appearance and behavior of Bazaar Explorer
en_CA: Tune the appearance and behaviour of Bazaar Explorer

en: Organise and delete tools related to the current hat
en_CA: Organize and delete tools related to the current hat

en: Organise and delete bookmarks related to the current hat
en_CA: Organize and delete bookmarks related to the current hat

en: 
    <p>Fetch a copy of a project using the %(Branch)s action.
    A branch requires a little more disk space than a checkout but
    operations are faster and you can work offline.</p>
    
    <p>To fetch just a snapshot of a project, use the %(Checkout)s action.
    A checkout is useful for in-house development where you have
    reliable and high speed network access to the server.
    If in doubt, use %(Branch)s instead of %(Checkout)s.</p>
    
    <p>See also: <a href="help bound-branches">bound branches</a>.</p>
en_CA: 
    <p>Fetch a copy of a project using the %(Branch)s action.
    A branch requires a little more disk space than a checkout but
    operations are faster and you can work off-line.</p>
    
    <p>To fetch just a snapshot of a project, use the %(Checkout)s action.
    A checkout is useful for in-house development where you have
    reliable and high speed network access to the server.
    If in doubt, use %(Branch)s instead of %(Checkout)s.</p>
    
    <p>See also: <a href="help bound-branches">bound branches</a>.</p>

en: A string with wildcards (? or *) that will be used to match the filenames. You can set several filename patterns by separating them with a semi-colon (;).
en_CA: A string with wildcards (? or *) that will be used to match the filenames. You can set several filename patterns by separating them with a semicolon (;).

en: A string with wildcards (? or *) that will be used to match the mimetypes of files. You can set several mimetype patterns by separating them with a semi-colon (;).
en_CA: A string with wildcards (? or *) that will be used to match the mimetypes of files. You can set several mimetype patterns by separating them with a semicolon (;).

en: Click to choose a command from the file chooser dialog.
en_CA: Click to choose a command from the file chooser dialogue.

en: This software is licensed under the GNU Genaral Public License (GPL)
en_CA: This software is licensed under the GNU Genaral Public Licence (GPL)

en:  Failed: Can't create %s: %s
en_CA:  Failed: Cannot create %s: %s

en: Can't write data in file %s
en_CA: Cannot write data in file %s

en: Can't open file %s for writing
en_CA: Cannot open file %s for writing

en: A list of strings with joker '*' or '?' to match the name of the selected file(s)/folder(s). Each selected items must match at least one of the filename patterns for the action to appear
en_CA: A list of strings with wildcard '*' or '?' to match the name of the selected file(s)/folder(s). Each selected items must match at least one of the filename patterns for the action to appear

en: A list of strings with joker '*' or '?' to match the mimetypes of the selected file(s). Each selected items must match at least one of the mimetype patterns for the action to appear
en_CA: A list of strings with wildcard '*' or '?' to match the mimetypes of the selected file(s). Each selected items must match at least one of the mimetype patterns for the action to appear

note: i18n notes: will be displayed in an error dialog
en: The action '%s' already exists with the name '%s', please first remove the existing one before trying to add this one
en_CA: The action '%s' already exists with the name '%s'.  Please first remove the existing one before trying to add this one

note: i18n notes: will be displayed in an error dialog
en: A profile already exists with the name '%s', please first remove or rename the existing one before trying to add this one
en_CA: A profile already exists with the name '%s'.  Please first remove or rename the existing one before trying to add this one

en: This profile tries to provide sane defaults and is useful if you know nothing about the input document.
en_CA: This profile tries to provide reasonable defaults and is useful if you have no information about the input document.

en: This profile is intended for the SONY PRS line. The 500/505/600/700 etc.
en_CA: This profile is intended for the SONY PRS line; the 500/505/600/700 etc.

en: This profile is intended for the SONY PRS 300.
en_CA: This profile is intended for the Sony PRS 300.

en: This profile is intended for the SONY PRS-900.
en_CA: This profile is intended for the Sony PRS-900.

en: This profile is intended for the Microsoft Reader.
en_CA: This profile is intended for Microsoft's Reader format.

en: This profile is intended for the Mobipocket books.
en_CA: This profile is intended for the Mobipocket format.

en: This profile is intended for the Irex Illiad.
en_CA: This profile is intended for the iRex iLiad.

en: This profile is intended for the IRex Digital Reader 1000.
en_CA: This profile is intended for the iRex Digital Reader 1000.

en: This profile is intended for the SONY PRS-300.
en_CA: This profile is intended for the Sony PRS-300.

en: This profile is intended for the SONY PRS line. The 500/505/700 etc, in landscape mode. Mainly useful for comics.
en_CA: This profile is intended for the Sony PRS line; the 500, 505, 700 etc., in landscape mode. Mainly useful for reading comics and similar print layouts.

en: Remove a custom plugin by name. Has no effect on builtin plugins
en_CA: Remove a custom plugin by name. Has no effect on built-in plugins

en: Catalog
en_CA: Catalogue

en: Communicate with Android phones.
en_CA: Communicate with Android devices.

en: Getting list of books on device...
en_CA: Getting list of books on device…

en: Transferring books to device...
en_CA: Transferring books to device…

en: Adding books to device metadata listing...
en_CA: Adding books to device metadata listing…

en: Removing books from device...
en_CA: Removing books from device…

en: Removing books from device metadata listing...
en_CA: Removing books from device metadata listing…

en: Sending metadata to device...
en_CA: Sending metadata to device…

en: Communicate with the Blackberry smart phone.
en_CA: Communicate with RIM Blackberry devices.

en: Communicate with the IRex Iliad eBook reader.
en_CA: Communicate with the iRex iLiad eBook reader.

en: Communicate with the IRex Digital Reader 1000 eBook reader.
en_CA: Communicate with the iRex Digital Reader 1000 eBook reader.

en: Communicate with the IRex Digital Reader 800
en_CA: Communicate with the iRex Digital Reader 800

en: Communicate with the Iriver Story reader.
en_CA: Communicate with the iriver Story reader.

en: Communicate with the Kindle eBook reader.
en_CA: Communicate with the Amazon Kindle eBook reader.

en: Communicate with the Kindle DX eBook reader.
en_CA: Communicate with the Amazon Kindle DX eBook reader.

en: Get device information...
en_CA: Get device information…

en: The Nook
en_CA: The B&N Nook

en: Communicate with the Nook eBook reader.
en_CA: Communicate with the B&N Nook eBook reader.

en: Comma separated list of metadata fields to turn into collections on the device. Possibilities include:
en_CA: Comma-separated list of metadata fields to turn into collections on the device. Possibilities include:

en: Place files in sub directories if the device supports them
en_CA: Place files in subdirectories if the device supports them

en: Disable normalize (improve contrast) color range for pictures. Default: False
en_CA: Disable normalize (improve contrast) colour range for pictures. Default: False

en: Don't sort the files found in the comic alphabetically by name. Instead use the order they were added to the comic.
en_CA: Don't sort the files found in the comic alphabetically by name. Instead use the order in which they were added to the comic.

en: Add Table of Contents to beginning of the book.
en_CA: Add Table of Contents to the beginning of the book.

en: Converting input to HTML...
en_CA: Converting input to HTML…

en: Running transforms on ebook...
en_CA: Running transforms on ebook…

en: Creating LIT file from EPUB...
en_CA: Creating LIT file from EPUB…

en: 	Parsing HTML...
en_CA: 	Parsing HTML…

en: 	Baen file detected. Re-parsing...
en_CA: 	Baen file detected. Re-parsing…

en: 	Converting to BBeB...
en_CA: 	Converting to BBeB…

en: Parsing LRF...
en_CA: Parsing LRF…

en: Creating XML...
en_CA: Creating XML…

en: Path to a graphic that will be set as this files' thumbnail
en_CA: Path to a graphic that will be set as this file's thumbnail

en: Set the cover to the specified file.
en_CA: Set the cover for the specified file.

en: Catalogs
en_CA: Catalogues

en: Foreground color
en_CA: Foreground colour

en: Background color
en_CA: Background colour

en: Choose background color
en_CA: Choose background colour

en: Dialog
en_CA: Dialogue

en: color
en_CA: colour

en: Background color:
en_CA: Background colour:

en: Color:
en_CA: Colour:

en: Save files in jpeg format
en_CA: Save files in JPEG format

en: Save files in png format
en_CA: Save files in PNG format

en: webcamshot
en_CA: webcam shot

en: your-password
en_CA: your password

en: your-username
en_CA: your username

en: Appends a timestamp, in UNIX time, to the ends of filenames
en_CA: Appends a timestamp, in UNIX time, to the end of filenames

en: Appends a timestamp, in UNIX time, to the ends of remote filenames
en_CA: Appends a timestamp, in UNIX time, to the end of remote filenames

en: Folder for saving captured pictures remotely
en_CA: Remote folder for saving captured pictures

en: Folder for saving captured pictures to locally
en_CA: Local folder for saving captured pictures

en: The unix file system path to the device that's assigned to your camera.
en_CA: The UNIX file system path to the device that's assigned to your camera.

en: Could save temporary image file in /tmp.
en_CA: Could not save temporary image file in /tmp.

en: Color Correction
en_CA: Colour Correction

en: Couldn't find the main interface file (camorama.glade).
en_CA: Could not find the main interface file (camorama.glade).

en: Couldn't find pixmap file: %s
en_CA: Could not find pixmap file: %s

en: Display information on this GNOME version
en_CA: Display information about this GNOME version

en: GNOME also includes a complete development platform for applications programmers, allowing the creation of powerful and complex applications.
en_CA: GNOME also includes a complete development platform for application programmers, allowing the creation of powerful and complex applications.

en: GNOME's greatest strength is our strong community. Virtually anyone, with or without coding skills, can contribute to making GNOME better.
en_CA: GNOME's greatest strength is its strong community. Virtually anyone, with or without coding skills, can contribute to making GNOME better.

en: Error cannot find file id '%s'
en_CA: Error cannot find file ID '%s'

en: Selected option in the log out dialog
en_CA: Selected option in the log-out dialogue

en: This is a relative path value based off the $datadir/pixmaps/ directory. Sub-directories and image names are valid values. Changing this value will effect the next session login.
en_CA: This is a relative path value based off the $datadir/pixmaps/ directory. Sub-directories and image names are valid values. Changing this value will affect the next session login.

en: This is the option that will be selected in the logout dialog, valid values are "logout" for logging out, "shutdown" for halting the system and "restart" for restarting the system.
en_CA: This is the option that will be selected in the logout dialogue. Valid values are "logout" for logging out, "shutdown" for halting the system and "restart" for restarting the system.

en: Couldn't find program %s in session
en_CA: Could not find program %s in session

en: The session might encounter issues if the computer clock is not properly configured. Please consider adjusting it.
    
    Current date is <b>%s</b>.
en_CA: The session might encounter issues if the computer's clock is not properly configured. Please consider adjusting it.
    
    Current date is <b>%s</b>.

en: The computer clock appears to be wrong
en_CA: The computer's clock appears to be wrong

en: Use dialog boxes for errors
en_CA: Use dialogue boxes for errors

en: Don't become a daemon
en_CA: Do not become a daemon

en: Couldn't put the machine to sleep.
    Verify that the machine is correctly configured.
en_CA: Could not put the machine to sleep.
    Verify that the machine is correctly configured.

en: Couldn't load sound file %s as sample %s
en_CA: Could not load sound file %s as sample %s

en: Width of border around the label and image in the alert dialog
en_CA: Width of border around the label and image in the alert dialogue

en: The buttons shown in the alert dialog
en_CA: The buttons shown in the alert dialogue

en: There was an error while trying to get the addressbook information
    Evolution Data Server can't handle the protocol
en_CA: There was an error while trying to get the addressbook information
    Evolution Data Server cannot handle the protocol

en: Unknown login ID, the user database might be corrupted
en_CA: Unknown login ID; the user database might be corrupted

en: Old password is incorrect, please retype it
en_CA: Old password is incorrect; please retype it

en: Please type the password again, it is wrong.
en_CA: Incorrect password; please type the password again.

en: Click on Change Password to change the password.
en_CA: Click on "Change Password" to change the password.

en: State/Pro_vince:
en_CA: Pro_vince/State:

en: Zip/_Postal code:
en_CA: _Postal/Zip Code:

en: _Zip/Postal code:
en_CA: Postal/_Zip code:

en: There was an error launching the mouse preferences dialog: %s
en_CA: There was an error launching the mouse preferences dialogue: %s

en: <b>_Desktop Colors</b>
en_CA: <b>_Desktop Colours</b>

en: Open a dialog to specify the color
en_CA: Open a dialogue to specify the colour

en: Solid Color
en_CA: Solid Colour

en: Couldn't find the file '%s'.
    
    Please make sure it exists and try again, or choose a different background picture.
en_CA: Could not find the file '%s'.
    
    Please make sure it exists and try again, or choose a different background picture.

en: I don't know how to open the file '%s'.
    Perhaps it's a kind of picture that is not yet supported.
    
    Please select a different picture instead.
en_CA: I do not know how to open the file '%s'.
    Perhaps it is a kind of picture that is not yet supported.
    
    Please select a different picture instead.

en: Testing the new settings. If you don't respond in %d second the previous settings will be restored. | Testing the new settings. If you don't respond in %d seconds the previous settings will be restored.
en_CA[0]: Testing the new settings. If you do not respond in %d second the previous settings will be restored.
en_CA[1]: Testing the new settings. If you do not respond in %d seconds the previous settings will be restored.

en: Gra_yscale
en_CA: Gre_yscale

en: _Fixed width font:
en_CA: _Fixed-width font:

en: The font selected is %d point large, and may make it difficult to effectively use the computer.  It is recommended that you select a size smaller than %d. | The font selected is %d points large, and may make it difficult to effectively use the computer. It is recommended that you select a size smaller than %d.
en_CA[0]: The font selected is %d point large, and may make it difficult to effectively use the computer.  It is recommended that you select a size smaller than %d.
en_CA[1]: The font selected is %d points large, and may make it difficult to effectively use the computer.  It is recommended that you select a size smaller than %d.

en: The font selected is %d point large, and may make it difficult to effectively use the computer.  It is recommended that you select a smaller sized font. | The font selected is %d points large, and may make it difficult to effectively use the computer. It is recommended that you select a smaller sized font.
en_CA[0]: The font selected is %d point large, and may make it difficult to effectively use the computer.  It is recommended that you select a smaller sized font.
en_CA[1]: The font selected is %d points large, and may make it difficult to effectively use the computer.  It is recommended that you select a smaller sized font.

en: Cursor blinks speed
en_CA: Cursor blink speed

en: Theme can not be deleted
en_CA: Theme cannot be deleted

en: No themes could be found on your system.  This probably means that your "Theme Preferences" dialog was improperly installed, or you haven't installed the "gnome-themes" package.
en_CA: No themes could be found on your system.  This probably means that your "Theme Preferences" dialogue was improperly installed, or you have not installed the "gnome-themes" package.

en: Can not install theme. 
    The bzip2 utility is not installed.
en_CA: Cannot install theme. 
    The bzip2 utility is not installed.

en: Can not install themes. 
    The gzip utility is not installed.
en_CA: Cannot install themes. 
    The gzip utility is not installed.

en: Cannot install theme.
    The tar program is not installed on your system.
en_CA: Cannot install theme.
    The tar(1) program is not installed on your system.

en: The default theme schemas could not be found on your system.  This means that you probably don't have metacity installed, or that your gconf is configured incorrectly.
en_CA: The default theme schemas could not be found on your system.  This means that you probably do not have metacity installed, or that your gconf is configured incorrectly.

en: <b>Behavior and Appearance</b>
en_CA: <b>Behaviour and Appearance</b>

en: Not a powerbook
en_CA: Not a PowerBook

en: Error activating XKB configuration.
    It can happen under various circumstances:
    - a bug in libxklavier library
    - a bug in X server (xkbcomp, xmodmap utilities)
    - X server with incompatible libxkbfile implementation
    
    X server version data:
    %s
    %d
    %s
    If you report this situation as a bug, please include:
    - The result of <b>%s</b>
    - The result of <b>%s</b>
en_CA: Error activating XKB configuration.
    This can happen under various circumstances:
    - a bug in libxklavier library
    - a bug in X server (xkbcomp, xmodmap utilities)
    - X server with incompatible libxkbfile implementation
    
    X server version data:
    %s
    %d
    %s
    If you report this situation as a bug, please include:
    - The result of <b>%s</b>
    - The result of <b>%s</b>

en: You are using XFree 4.3.0.
    There are known problems with complex XKB configurations.
    Try using a simpler configuration or taking a fresher version of XFree software.
en_CA: You are using XFree 4.3.0.
    There are known problems with complex XKB configurations.
    Try using a simpler configuration or using a newer version of XFree software.

en: Couldn't load the Glade file.
    Make sure that this daemon is properly installed.
en_CA: Could not load the Glade file.
    Make sure that this daemon is properly installed.

en: A collection of scripts to run whenever the keyboard state is reloaded. Useful for re-applying xmodmap based adjustments
en_CA: A collection of scripts to run whenever the keyboard state is reloaded. Useful for re-applying xmodmap-based adjustments

en: Keyboard settings in gconf will be overridden from the system ASAP (deprecated)
en_CA: Keyboard settings in GConf will be overridden from the system ASAP (deprecated)

en: Very soon, keyboard settings in gconf will be overridden (from the system configuration) This key has been deprecated since GNOME 2.12, please unset the model, layouts and options keys to get the default system configuration.
en_CA: Very soon, keyboard settings in GConf will be overridden (from the system configuration). This key has been deprecated since GNOME 2.12. Please unset the model, layouts and options keys to get the default system configuration.

en: Unable to bring up the typing break properties dialog with the following error: %s
en_CA: Unable to bring up the typing break properties dialogue with the following error: %s

en: The typing monitor uses the notification area to display information. You don't seem to have a notification area on your panel. You can add it by right-clicking on your panel and choosing 'Add to panel', selecting 'Notification area' and clicking 'Add'.
en_CA: The typing monitor uses the notification area to display information. You do not seem to have a notification area on your panel. You can add it by right-clicking on your panel and choosing 'Add to panel', selecting 'Notification area' and clicking 'Add'.

en: Failed to launch '%s'
en_CA: '%s' launch failed

en: Power Off
en_CA: Shutdown

note: #-#-#-#-#  134 (gtk+)  #-#-#-#-# Translators: this will appear as tab label in print dialog. #-#-#-#-#  136 (gtk+)  #-#-#-#-# #-#-#-#-#  216 (gtk+)  #-#-#-#-# #-#-#-#-#  218 (gtk+)  #-#-#-#-#
en: Color
en_CA: Colour

note: strftime format of a weekday and a date without a year.
en: %A, %B %e
en_CA: %A, %e %B

en: failed to register with the message bus
en_CA: Failed to register with the message bus

en: screensaver already running in this session
en_CA: Screensaver already running in this session

en: Unable to create graphical interface!
en_CA: Unable to create graphical user interface!

en: If you have connected a device, you may need to mount it first.
en_CA: If you have connected a device, you may have to mount it first.

en: Rerun antivirus setup _wizard
en_CA: Restart antivirus setup _wizard

en: No items currently quarantined.
en_CA: No items are currently quarantined.

en: %d item(s) currently quarantined.
en_CA: %d item(s) are currently quarantined.

en: ClamTk is a GUI front-end for the ClamAV antivirus using gtk2-perl.
en_CA: ClamTk is a GUI front-end for ClamAV antivirus using gtk2-perl.

en: Action Taken
en_CA: Action Has Been Taken

en: You must be root to enable this.
en_CA: You must have root to enable this.

en: Check for updates to the graphical interface
en_CA: Check for updates to the graphical user interface

en: It is recommended you do not run this application as root.
    Please see http://clamtk.sf.net/faq.html.
en_CA: It is recommended that you do not run this application as root.
    Please see http://clamtk.sf.net/faq.html.

en: &Music
en_CA: Music

en: &Playlist
en_CA: Playlist

en: &Repeat mode
en_CA: Repeat mode

en: &Shuffle mode
en_CA: Shuffle mode

en: Choose color...
en_CA: Choose colour...

en: Clementine Visualization
en_CA: Clementine Visualisation

en: Close visualization
en_CA: Close visualisation

en: Delay between visualizations
en_CA: Delay between visualisations

en: Edit tracks information...
en_CA: Edit track information...

en: Favorites
en_CA: Favourites

en: Last.fm Neighbor Radio - %1
en_CA: Last.fm Neighbour Radio - %1

en: Not enough neighbors
en_CA: Not enough neighbours

en: Random visualization
en_CA: Random visualisation

en: Select visualizations
en_CA: Select visualisations

en: Select visualizations...
en_CA: Select visualisations...

en: Visualization mode
en_CA: Visualisation mode

en: Visualizations
en_CA: Visualisations

en: Visualizations Settings
en_CA: Visualisations Settings

en: Center justifies the paragraphs
en_CA: Centre justifies the paragraphs

en: _Center
en_CA: _Centre

en: _Strikethrough
en_CA: _Strikeout

en: color preview
en_CA: colour preview

en: Choose Custom Color
en_CA: Choose Custom Colour

en: C_olor:
en_CA: C_olour:

en: _Color:
en_CA: _Colour:

en: Input the words you want to search here
en_CA: Enter the words you want to search for here

en: Unable to add word to dictionary,
    language settings are broken.
en_CA: Unable to add word to dictionary.
    Language settings are broken.

en: New Link Color
en_CA: New Link Colour

en: The color of new link elements
en_CA: The colour of new link elements

en: Visited Link Color
en_CA: Visited Link Colour

en: The color of visited link elements
en_CA: The colour of visited link elements

en: Active Link Color
en_CA: Active Link Colour

en: The color of active link elements
en_CA: The colour of active link elements

en: Spelling Error Color
en_CA: Spelling Error Colour

en: The color of the spelling error markers
en_CA: The colour of the spelling error markers

en: Cite Quotation Color
en_CA: Cite Quotation Colour

en: The color of the cited text
en_CA: The colour of the cited text

en: Serialisation Type List
en_CA: Serialization Type List

en: List (itemised)
en_CA: List (itemized)

en: Italicised
en_CA: Italicized

en: RELAX NG is a schema language i.e. a language for describing the structure of an XML document.
en_CA: RELAX NG is a schema language, i.e. a language for describing the structure of an XML document.

en: Id. Number
en_CA: ID Number

en: So Called
en_CA: So-Called

en: TEI stands for Text Encoding Initiative, see http://www.tei-c.org/ for more information; the TEI Lite dtd is a subset of the powerful TEI dtds which comprises the most commonly used elements.
en_CA: TEI stands for Text Encoding Initiative; see http://www.tei-c.org/ for more information.  The TEI Lite DTD, a subset of the powerful TEI DTDs, comprises the most commonly used elements.

en: The approximate size of the electronic text as stored on some carrier medium, specified in any convenient units
en_CA: The approximate size of the electronic text as stored on some carrier medium, specified in any convenient unit

en: Number of words :
en_CA: Number of words:

en: Please specify a file name.
en_CA: Please specify a filename.

en: Since Conglomerate could not read the stylesheet it is possible that your XML catalog file is set up incorrectly. See http://www.xmlsoft.org/catalog.html for more information on catalogs.
en_CA: Since Conglomerate could not read the stylesheet it is possible that your XML catalogue file is set up incorrectly. See http://www.xmlsoft.org/catalog.html for more information on catalogues.

note: * The text may not be very helpful. * It would be nice to make the URLs be actual links.
en: Conglomerate can not find the stylesheet used to convert DocBook to %s
en_CA: Conglomerate cannot find the stylesheet used to convert DocBook to %s

en: Ensure that Norman Walsh's DocBook XSL stylesheets, available at http://docbook.sourceforge.net/projects/xsl/, are installed and are added to your XML catalog file (see http://www.xmlsoft.org/catalog.html for more information on catalogs).
en_CA: Ensure that Norman Walsh's DocBook XSL stylesheets, available at http://docbook.sourceforge.net/projects/xsl/, are installed and are added to your XML catalogue file (see http://www.xmlsoft.org/catalog.html for more information on catalogues).

en: GNOME Control Center
en_CA: GNOME Control Centre

en: Couldn't execute command: %s
    Verify that this command exists.
en_CA: Could not execute command: %s
    Verify that this command exists.

en: Display a dialog when there are errors running the screensaver
en_CA: Display a dialogue when there are errors running the screensaver

en: %s error: don't know how to export into %s
en_CA: %s error: do not know how to export into %s

en: Can't find output format/filter %s
en_CA: Cannot find output format/filter %s

en: Don't show the splash screen
en_CA: Do not show the splash screen

en: Don't create empty diagram
en_CA: Do not create empty diagram

en: Send error messages to stderr instead of showing dialogs.
en_CA: Send error messages to stderr instead of showing dialogues.

en: Can't connect to session manager!
en_CA: Cannot connect to session manager!

en: Couldn't find standard objects when looking for object-libs; exiting...
en_CA: Could not find standard objects when looking for object-libs; exiting...

en: Couldn't find standard objects when looking for object-libs in '%s'; exiting...
en_CA: Could not find standard objects when looking for object-libs in '%s'; exiting...

en: This shouldn't happen.  Please file a bug report at bugzilla.gnome.org
    describing how you can cause this message to appear.
en_CA: This should not happen.  Please file a bug report at bugzilla.gnome.org
    describing how you can cause this message to appear.

en: Select foreground color
en_CA: Select foreground colour

en: Select background color
en_CA: Select background colour

en: translator_credits-PLEASE_ADD_YOURSELF_HERE
en_CA: Maintainer: Adam Weinberger <adamw@gnome.org>

en: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
en_CA: This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public Licence as published by
    the Free Software Foundation; either version 2 of the Licence, or
    (at your option) any later version.
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public Licence for more details.
    
    You should have received a copy of the GNU General Public Licence
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

note: &export_file_name
en: Export file name to use
en_CA: Export filename to use

en: Couldn't convert filename '%s' to UTF-8: %s
en_CA: Could not convert filename '%s' to UTF-8: %s

en: This object doesn't support Undo/Redo.
    Undo information erased.
en_CA: This object does not support Undo/Redo.
    Undo information erased.

en: Can't open output file %s: %s
en_CA: Cannot open output file %s: %s

en: Foreground & background colors for new objects.  The small black and white squares reset colors.  The small arrows swap colors.  Double click to change colors.
en_CA: Foreground & background colours for new objects.  The small black and white squares reset colours.  The small arrows swap colours.  Double click to change colours.

en: Can't find parent %s of %s object
en_CA: Cannot find parent %s of %s object

en: Couldn't open: '%s' for reading.
en_CA: Could not open: '%s' for reading.

en: _Export ...
en_CA: _Export...

note: display_select_radio_entries go here
en: Select By
en_CA: _Select

en: Couldn't get GTK settings
en_CA: Could not get GTK settings

en: Background Color:
en_CA: Background Colour:

en: Can't get symbol 'custom_type' from any module.
    Editing shapes is disabled.
en_CA: Cannot get symbol 'custom_type' from any module.
    Editing shapes is disabled.

en: Couldn't open '%s': %s
en_CA: Could not open '%s': %s

en: Couldn't open: '%s' for writing
en_CA: Could not open: '%s' for writing

en: Can't find standard object
en_CA: Cannot find standard object

en: Can't load font %s.
en_CA: Cannot load font %s.

en: Line color
en_CA: Line colour

en: Fill color
en_CA: Fill colour

en: No attribute '%s' (%p) or no data(%p) in this attribute
en_CA: No attribute '%s' (%p) or no data (%p) in this attribute

en: Couldn't find font family for %s
en_CA: Could not find font family for %s

en: Select color
en_CA: Select colour

en: More colors...
en_CA: More colours...

en: The condition's color
en_CA: The condition's colour

en: The receptivity's color
en_CA: The receptivity's colour

en: Arrow color
en_CA: Arrow colour

en: Seconds arrow color
en_CA: Seconds arrow colour

note: #-#-#-#-#  39 (dia)  #-#-#-#-# should probably be refactored too.
en: Text Color
en_CA: Text Colour

en: Foreground Color
en_CA: Foreground Colour

note: #-#-#-#-#  238 (Pidgin)  #-#-#-#-# Buddy List
en: Background Color
en_CA: Background Colour

en: Data color
en_CA: Data colour

en: Cairo based Rendering
en_CA: Cairo-based Rendering

en: GNOME Print based Rendering
en_CA: GNOME Print-based Rendering

en: Couldn't open '%s' for writing.
en_CA: Could not open '%s' for writing.

en: Can't export png without libart!
en_CA: Cannot export PNG without libart!

en: Couldn't read color: %s
en_CA: Could not read colour: %s

en: Couldn't open: '%s' for writing.
en_CA: Could not open: '%s' for writing.

en: No more user-definable colors - using black
en_CA: No more user-definable colours - using black

en: Couldn't read ellipse info: %s
en_CA: Could not read ellipse info: %s

en: Couldn't read polyline info: %s
en_CA: Could not read polyline info: %s

en: Couldn't read flipped bit: %s
en_CA: Could not read flipped bit: %s

en: Couldn't read spline info: %s
en_CA: Could not read spline info: %s

en: Couldn't read arc info: %s
en_CA: Could not read arc info: %s

en: Couldn't read text info: %s
en_CA: Could not read text info: %s

en: Couldn't identify FIG object: %s
en_CA: Could not identify FIG object: %s

en: Couldn't read group extend: %s
en_CA: Could not read group extend: %s

en: Error reading transparent color: %s
en_CA: Error reading transparent colour: %s

en: Doesn't look like a Fig file: %s
en_CA: Does not look like a FIG file: %s

en: Node center
en_CA: Node centre

en: Data Center Switch
en_CA: Data Centre Switch

en: Data Center Switch Reversed
en_CA: Data Centre Switch Reversed

en: Route Switch Processor with Si
en_CA: Route Switch Processor with Silicon

en: 
    Unknows command: %s
en_CA: 
    Unknown command: %s

note: VERSION
en: 
    Free Interactive Geometry
    
    (c) Copyright 1996-2005 H. Fernandes  
    (c) Copyright 2000 L. Gauthier
    (c) Copyright 2000-2005 OFSET
    Translation: translator_name
en_CA: 
    Free Interactive Geometry
    
    (c) Copyright 1996-2005 H. Fernandes  
    (c) Copyright 2000 L. Gauthier
    (c) Copyright 2000-2005 OFSET
    Translation: Adam Weinberger <adamw@gnome.org>

en: Center %s
en_CA: Centre %s

en: Circle defined by its center and a point:: %s
en_CA: Circle defined by its centre and a point:: %s

en: Circle defined by its center and a segment:: %s
en_CA: Circle defined by its centre and a segment:: %s

en: Circle defined by its center and radius:: %s
en_CA: Circle defined by its centre and radius:: %s

en: Circle: select its center and a point or its radius (number or segment)
en_CA: Circle: select its centre and a point or its radius (number or segment)

en: Central symmetry: select a geometric object and the center
en_CA: Central symmetry: select a geometric object and the centre

en: Rotation: select a geometric object, the center and an angle or a scalar
en_CA: Rotation: select a geometric object, the centre and an angle or a scalar

en: Scale: select a geometric object, the center and a scalar
en_CA: Scale: select a geometric object, the centre and a scalar

en: Select Color
en_CA: Select Colour

en: Circle defines by center and point, radius or segment
en_CA: Circle defines by centre and point, radius or segment

en: Connection will be established in Fast Start mode. Fast Start is a new way to start calls faster that was introduced in H.323v2. It is not supported by Netmeeting and using both Fast Start and H.245 Tunneling can crash some versions of Netmeeting
en_CA: Connection will be established in Fast Start mode. Fast Start is a new way to start calls faster that was introduced in H.323v2. It is not supported by Netmeeting and using both Fast Start and H.245 Tunnelling can crash some versions of Netmeeting

en: Enable H.245 tunneling
en_CA: Enable H.245 tunnelling

en: Enable echo cancelation
en_CA: Enable echo cancellation

en: If enabled, use echo cancelation
en_CA: If enabled, use echo cancellation

en: The STUN server to use for STUN Support. STUN is a technic that permits to go through some types of NAT gateways
en_CA: The STUN server to use for STUN Support. STUN is a technique that permits routing through some types of NAT gateways

en: The range of TCP ports that Ekiga will use for the H.323 H.245 channel. Ekiga needs to be restarted for the new values to take effect. This port range has no effect if both participants to the conference are using H.245 Tunneling.
en_CA: The range of TCP ports that Ekiga will use for the H.323 H.245 channel. Ekiga needs to be restarted for the new values to take effect. This port range has no effect if both participants to the conference are using H.245 Tunnelling.

en: The range of UDP ports that Ekiga will use for SIP signaling and when registering to gatekeepers. Ekiga needs to be restarted for the new values to take effect.
en_CA: The range of UDP ports that Ekiga will use for SIP signalling and when registering to gatekeepers. Ekiga needs to be restarted for the new values to take effect.

en: Do not show this dialog again
en_CA: Do not show this dialogue again

en: Ekiga is now recording from %s and playing back to %s. Please say "1, 2, 3, Ekiga rocks!" in your microphone. You should hear yourself back into the speakers with a four-second delay.
en_CA: Ekiga is now recording from %s and playing back to %s. Please say "1, 2, 3, Ekiga rocks!" into your microphone. You should hear yourself back in the speakers with a four-second delay.

en: Your driver doesn't seem to support any of the color formats supported by Ekiga.
     Please check your kernel driver documentation in order to determine which Palette is supported.
en_CA: Your driver doesn't seem to support any of the colour formats supported by Ekiga.
     Please check your kernel driver documentation in order to determine which Palette is supported.

en: Your driver doesn't support any of the color formats tried by Ekiga
en_CA: Your driver does not support any of the colour formats tried by Ekiga

en: Another contact with similar information already exists in your address book:
    
    <b>Name</b>: %s
    <b>URL</b>: %s
    <b>Speed Dial</b>: %s
    
    Do you still want to add the contact?
en_CA: Another contact with similar information already exists in your address book:
    
    <b>Name</b>: %s
    <b>URL</b>: %s
    <b>Speed Dial</b>: %s
    
    Do you still want to add this contact?

en: _Write e-Mail
en_CA: _Write E-Mail

en: Please make sure to provide at least a full name or an URL for the contact.
en_CA: Pleastr make sure to provide at least a full name or an URL for the contact.

en: Add an address book
en_CA: Add an address Book

en: Enabled echo cancelation
en_CA: Enabled echo cancellation

en: Disabled echo cancelation
en_CA: Disabled echo cancellation

en: Adjust color
en_CA: Adjust colour

en: Ekiga didn't find any usable audio plugin. Make sure that your installation is correct.
en_CA: Ekiga did not find any usable audio plugin. Make sure that your installation is correct.

en: Enable echo can_celation
en_CA: Enable echo can_cellation

en: If enabled, use echo cancelation.
en_CA: If enabled, use echo cancellation.

note: Introduction label
en: You can make calls to regular phones and cell numbers worldwide using Ekiga. To enable this, you need to do three things. First create an account at the URL below. Then enter your account number and password. Finally, activate the registration below.
    
    The service will work only if your account is created using the URL in this dialog.
en_CA: You can make calls to regular phones and cell numbers worldwide using Ekiga. To enable this, you need to do three things. First create an account at the URL below. Then enter your account number and password. Finally, activate the registration below.
    
    The service will work only if your account is created using the URL in this dialogue.

en: You canceled the file transfer
en_CA: You cancelled the file transfer

en: The other participant canceled the file transfer
en_CA: The other participant cancelled the file transfer

note: Translators: timestamp displayed between conversations in * chat windows (strftime format string)
en: %A %B %d %Y
en_CA: %A %B %e %Y

en: Vertical Error (meters):
en_CA: Vertical Error (metres):

en: Horizontal Error (meters):
en_CA: Horizontal Error (metres):

en: %B %e, %Y at %R UTC
en_CA: %B %e, %Y at %I:%M %p UTC

en: Click to remove this status as a favorite
en_CA: Click to remove this status as a favourite

en: Click to make this status a favorite
en_CA: Click to make this status a favourite

en: Empathy is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Empathy is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Empathy is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Empathy is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Empathy; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-130159 USA
en_CA: You should have received a copy of the GNU General Public Licence along with Empathy; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-130159 USA

en: _Favorite Chat Room
en_CA: _Favourite Chat Room

en: Manage Favorite Rooms
en_CA: Manage Favourite Rooms

en: Remove completed, canceled and failed file transfers from the list
en_CA: Remove completed, cancelled and failed file transfers from the list

en: Join _Favorites
en_CA: Join _Favourites

en: Manage Favorites
en_CA: Manage Favourites

en: Metering Mode:
en_CA: Metreing Mode:

en: As custom color:
en_CA: As custom colour:

en: Color for Transparent Areas
en_CA: Colour for Transparent Areas

en: Determines how transparency should be indicated. Valid values are CHECK_PATTERN, COLOR and NONE. If COLOR is chosen, then the trans-color key determines the color value used.
en_CA: Determines how transparency should be indicated. Valid values are CHECK_PATTERN, COLOR and NONE. If COLOR is chosen, then the trans-colour key determines the colour value used.

en: If this is active, the color set by the background-color key will be used to fill the area behind the image. If it is not set, the current GTK+ theme will determine the fill color.
en_CA: If this is active, the colour set by the background-colour key will be used to fill the area behind the image. If it is not set, the current GTK+ theme will determine the fill colour.

en: The color that is used to fill the area behind the image. If the use-background-color key is not set, the color is determined by the active GTK+ theme instead.
en_CA: The colour that is used to fill the area behind the image. If the use-background-colour key is not set, the colour is determined by the active GTK+ theme instead.

en: Transparency color
en_CA: Transparency colour

en: Use a custom background color
en_CA: Use a custom background colour

note: A strftime-formatted string, to display the date the image was taken.
en: %a, %d %B %Y  %X
en_CA: a%, %d %B Y%  %X

note: A strftime-formatted string, to display the date the image was taken, for the case we don't have the time.
en: %a, %d %B %Y
en_CA: a%, %d %B Y%

en: Millimeters
en_CA: Millimetres

en: Auto Rotate and Center
en_CA: Auto Rotate and Centre

en: Rotate printer page orientation of each page to match orientation of each document page. Document pages will be centered within the printer page.
en_CA: Rotate printer page orientation of each page to match orientation of each document page. Document pages will be centreed within the printer page.

en: Document License
en_CA: Document Licence

en: Text License
en_CA: Text Licence

en: Evince is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Evince is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Evince is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Evince is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Evince; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
en_CA: You should have received a copy of the GNU General Public Licence along with Evince; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA

en: _Inverted Colors
en_CA: _Inverted Colours

en: Show page contents with the colors inverted
en_CA: Show page contents with the colours inverted

en: It has %d event. | It has %d events.
en_CA[0]: It has %d event
en_CA[1]: It has %d events

en: evolution calendar search bar
en_CA: Evolution calendar search bar

en: Click here, you can find more events.
en_CA: Click here to find more events.

note: action name
en: popup a child
en_CA: pop up a child

en: evolution calendar item
en_CA: Evolution calendar item

en: Check to make sure your password is spelled correctly and that you are using a supported login method. Remember that many passwords are case sensitive; your caps lock might be on.
en_CA: Check to make sure your password is spelled correctly and that you are using a supported login method. Remember that many passwords are case sensitive;

en: This LDAP server may use an older version of LDAP, which does not support this functionality or it may be misconfigured. Ask your administrator for supported search bases.
en_CA: This LDAP server may use an older version of LDAP which does not support this functionality, or it may be misconfigured. Ask your administrator for supported search bases.

en: The way Evolution stores some phone numbers has changed.
    
    Please be patient while Evolution migrates your folders...
en_CA: The way Evolution stores phone numbers has changed.
    
    Please be patient while Evolution migrates your folders...

en: URI for the folder last used in the select names dialog
en_CA: URI for the folder last used in the select names dialogue

en: URI for the folder last used in the select names dialog.
en_CA: URI for the folder last used in the select names dialogue.

en: Search filter is the type of the objects searched for, while performing the search. If this is not modified, by  default search will be performed on objectclass of the type "person".
en_CA: Search filter is the type of the objects searched for, while performing the search. If this is not modified, by default search will be performed on objectclass of the type "person".

en: This is the method Evolution will use to authenticate you.  Note that setting this to "Email Address" requires anonymous access to your ldap server.
en_CA: This is the method Evolution will use to authenticate you.  Note that setting this to "Email Address" requires anonymous access to your LDAP server.

en: _ZIP Code:
en_CA: _Postal Code:

note: #-#-#-#-#  47 (evolution)  #-#-#-#-# E_BOOK_ERROR_CANCELLED
en: Canceled
en_CA: Cancelled

en: All information in these journal entries will be deleted and can not be restored.
en_CA: All information in these journal entries will be deleted and cannot be restored.

en: All information in this journal will be deleted and can not be restored.
en_CA: All information in this journal will be deleted and cannot be restored.

en: All information on these appointments will be deleted and can not be restored.
en_CA: All information on these appointments will be deleted and cannot be restored.

en: All information on these tasks will be deleted and can not be restored.
en_CA: All information on these tasks will be deleted and cannot be restored.

en: All information on this appointment will be deleted and can not be restored.
en_CA: All information on this appointment will be deleted and cannot be restored.

en: All information on this journal entry will be deleted and can not be restored.
en_CA: All information on this journal entry will be deleted and cannot be restored.

en: All information on this meeting will be deleted and can not be restored.
en_CA: All information on this meeting will be deleted and cannot be restored.

en: All information on this task will be deleted and can not be restored.
en_CA: All information on this task will be deleted and cannot be restored.

en: Are you sure you want to delete the appointment titled '{0}'?
en_CA: Are you sure you want to delete the appointment entitled '{0}'?

en: Do not Send
en_CA: Do Not Send

en: If you do not send a cancelation notice, the other participants may not know the journal has been deleted.
en_CA: If you do not send a cancellation notice, the other participants may not know the journal has been deleted.

en: If you do not send a cancelation notice, the other participants may not know the meeting is canceled.
en_CA: If you do not send a cancellation notice, the other participants may not know the meeting is cancelled.

en: If you do not send a cancelation notice, the other participants may not know the task has been deleted.
en_CA: If you do not send a cancellation notice, the other participants may not know the task has been deleted.

en: Would you like to send a cancelation notice for this journal entry?
en_CA: Would you like to send a cancellation notice for this journal entry?

en: Would you like to send all the participants a cancelation notice?
en_CA: Would you like to send all the participants a cancellation notice?

en: Evolution does not support calendar reminders with
    email notifications yet, but this reminder was
    configured to send an email.  Evolution will display
    a normal reminder dialog box instead.
en_CA: Evolution does not support calendar reminders with
    email notifications yet, but this reminder was
    configured to send an email.  Evolution will display
    a normal reminder dialogue box instead.

en: Background color of tasks that are due today, in "#rrggbb" format.
en_CA: Background colour of tasks that are due today, in "#rrggbb" format.

en: Background color of tasks that are overdue, in "#rrggbb" format.
en_CA: Background colour of tasks that are overdue, in "#rrggbb" format.

en: Color to draw the Marcus Bains Line in the Time bar (empty for default).
en_CA: Colour to draw the Marcus Bains Line in the Time bar (empty for default).

en: Color to draw the Marcus Bains line in the Day View.
en_CA: Colour to draw the Marcus Bains line in the Day View.

en: Hour the workday ends on, in twenty four hour format, 0 to 23.
en_CA: Hour the workday ends on, in 24-hour format, 0 to 23.

en: Hour the workday starts on, in twenty four hour format, 0 to 23.
en_CA: Hour the workday starts on, in 24-hour format, 0 to 23.

en: Marcus Bains Line Color - Day View
en_CA: Marcus Bains Line Colour - Day View

en: Marcus Bains Line Color - Time bar
en_CA: Marcus Bains Line Colour - Time bar

en: Overdue tasks color
en_CA: Overdue tasks colour

en: Tasks due today color
en_CA: Tasks due today colour

en: The URL template to use as a free/busy data fallback, %u is replaced by the user part of the mail address and %d is replaced by the domain.
en_CA: The URL template to use as a free/busy data fallback. %u is replaced by the user part of the mail address and %d is replaced by the domain.

en: Twenty four hour time format
en_CA: 24-hour time format

en: Whether or not to use the notification tray for display alarms.
en_CA: Whether or not to use the notification tray for displaying alarms.

en: Whether to show times in twenty four hour format instead of using am/pm.
en_CA: Whether to show times in 24-hour format instead of using am/pm.

en: Pick a color
en_CA: Pick a colour

en: %d minute before appointement | %d minutes before appointment
en_CA[0]: %d minute before appointment
en_CA[1]: %d minutes before appointment

en: 1day before appointment
en_CA: 1 day before appointment

en: Or_ganiser:
en_CA: Or_ganizer:

note: #-#-#-#-#  47 (evolution)  #-#-#-#-# strftime format of a weekday, a date and a time, 24-hour. #-#-#-#-#  48 (evolution-data-server)  #-#-#-#-# strptime format of a weekday, a date and a time, in 24-hour format. strftime format of a weekday, a date and a time, in 24-hour format.
en: %a %m/%d/%Y %H:%M:%S
en_CA: %a %d/%m/%Y %H:%M:%S

note: #-#-#-#-#  47 (evolution)  #-#-#-#-# strftime format of a weekday, a date and a time, 12-hour. #-#-#-#-#  48 (evolution-data-server)  #-#-#-#-# strptime format of a weekday, a date and a time, in 12-hour format. strftime format of a weekday, a date and a time, in 12-hour format.
en: %a %m/%d/%Y %I:%M:%S %p
en_CA: %a %d/%m/%Y %I:%M:%S %p

en: The meeting has been canceled, however it could not be found in your calendars
en_CA: The meeting has been cancelled. However, it could not be found in your calendars

en: The task has been canceled, however it could not be found in your task lists
en_CA: The task has been cancelled. However, it could not be found in your task lists

en: <b>%s</b> has canceled a meeting.
en_CA: <b>%s</b> has cancelled a meeting.

en: Meeting Cancelation
en_CA: Meeting Cancellation

en: <b>%s</b> has canceled a task.
en_CA: <b>%s</b> has cancelled a task.

en: Task Cancelation
en_CA: Task Cancellation

note: #-#-#-#-#  47 (evolution)  #-#-#-#-# This is a strftime() format string %a = abbreviated weekday name, %m = month number, %d = month day, %Y = full year. This is a strftime() format string %a = abbreviated weekday name, %m = month number, %d = month day, %Y = full year. #-#-#-#-#  48 (evolution-data
en: %a %m/%d/%Y
en_CA: %a %d/%m/%Y

note: #-#-#-#-#  47 (evolution)  #-#-#-#-# This is a strftime() format string %m = month number, %d = month day, %Y = full year. #-#-#-#-#  48 (evolution-data-server)  #-#-#-#-# strptime format of a weekday and a date. This is the preferred date format for the locale.
en: %m/%d/%Y
en_CA: %d/%m/%Y

en: America/North_Dakota/Center
en_CA: America/North_Dakota/Centre

en:  There are few attachments getting downloaded. Sending the mail will cause the mail to be sent without those pending attachments
en_CA:  There are few attachments being downloaded. Sending the mail will cause the mail to be sent without those pending attachments

en: _Don't Recover
en_CA: _Do Not Recover

en: No, Do not Change Status
en_CA: No, Do Not Change Status

en: %s License Agreement
en_CA: %s Licence Agreement

en: 
    Please read carefully the license agreement
    for %s displayed below
    and tick the check box for accepting it
en_CA: 
    Please read carefully the licence agreement
    for %s displayed below
    and tick the check box for accepting it

en: Assign Color
en_CA: Assign Colour

en: This message is encrypted, but with a weak encryption algorithm. It would be difficult, but not impossible for an outsider to view the content of this message in a practical amount of time.
en_CA: This message is encrypted, but with a weak encryption algorithm. It would be difficult--but not impossible--for an outsider to view the content of this message in a practical amount of time.

en: Citation highlight color
en_CA: Citation highlight colour

en: Citation highlight color.
en_CA: Citation highlight colour.

en: Default height of the Subscribe dialog
en_CA: Default height of the Subscribe dialogue

en: Default width of the Subscribe dialog
en_CA: Default width of the Subscribe dialogue

en: List of Labels and their associated colors
en_CA: List of Labels and their associated colours

en: List of accepted licenses
en_CA: List of accepted licences

en: List of labels known to the mail component of Evolution. The list contains strings containing name:color where color uses the HTML hex encoding.
en_CA: List of labels known to the mail component of Evolution. The list contains strings containing name:colour where colour uses the HTML hex encoding.

en: List of protocol names whose license has been accepted.
en_CA: List of protocol names whose licence has been accepted.

en: Load images for HTML messages over http(s). Possible values are: 0 - Never load images off the net 1 - Load images in mail from contacts 2 - Always load images off the net
en_CA: Load images for HTML messages over http(s). Possible values are: 0 - Never load images off the net; 1 - Load images in mail from contacts; 2 - Always load images off the net

en: Subscribe dialog default height
en_CA: Subscribe dialogue default height

en: Subscribe dialog default width
en_CA: Subscribe dialogue default width

en: <span weight="bold">Default Behavior</span>
en_CA: <span weight="bold">Default Behaviour</span>

en: <span weight="bold">Labels and Colors</span>
en_CA: <span weight="bold">Labels and Colours</span>

en: Color for _misspelled words:
en_CA: Colour for _misspelled words:

en: Fi_xed width Font:
en_CA: Fi_xed-width Font:

en: License Agreement
en_CA: Licence Agreement

en: _Accept License
en_CA: _Accept Licence

en: _Tick this to accept the license agreement
en_CA: _Check this to accept the licence agreement

en: Canceled.
en_CA: Cancelled.

en: Retrieving %d message | Retrieving %d messages
en_CA[0]: Retrieving %d message
en_CA[1]: Retrieving %d message(s)

en: Saving %d message | Saving %d messsages
en_CA[0]: Saving %d message
en_CA[1]: Saving %d messsage(s)

en: Canceling...
en_CA: Cancelling...

en: User canceled operation.
en_CA: User cancelled operation.

en: Adding a meaningful Subject line to your messages will give your recipients an idea of what your mail is about.
en_CA: Adding a meaningful Subject line to your messages will give your recipients an idea of the topic of your letter.

en: Are you sure you want to permanently remove all the deleted messages in folder &quot;{0}&quot;?
en_CA: Are you sure you want to remove permanently all the deleted messages in folder &quot;{0}&quot;?

en: Cannot read the license file &quot;{0}&quot;, due to an installation problem. You will not be able to use this provider until you can accept its license.
en_CA: Cannot read the licence file &quot;{0}&quot;, due to an installation problem. You will not be able to use this provider until you can accept its licence.

en: File exists but cannot overwrite it.
en_CA: File exists but cannot be overwritten.

en: The following Search Folder(s):
    {0}
    Used the now removed folder:
        &quot;{1}&quot;
    And have been updated.
en_CA: The following Search Folder(s):
    {0}
    used the now-removed folder:
        &quot;{1}&quot;
    and has been updated.

en: This folder may have been added implicitly,
    go to the Search Folder editor to add it explicitly, if required.
en_CA: This folder may have been added implicitl.,
    Go to the Search Folder editor to add it explicitly, if required.

en: Unable to read license file.
en_CA: Unable to read licence file.

en: You must specify at least one folder as a source.
    Either by selecting the folders individually, and/or by selecting all local folders, all remote folders, or both.
en_CA: You must specify at least one folder as a source.
    Either select the folders individually, and/or by select all local folders, all remote folders, or both.

en: Your login to your server &quot;{0}&quot; as &quot;{0}&quot; failed.
en_CA: Failed to log into your server &quot;{0}&quot; as &quot;{0}&quot; failed.

note: #-#-#-#-#  245 (rhythmbox)  #-#-#-#-# Translators: "friendly time" string for a day in a different year, * strftime format. e.g. "Feb 12 1997"
en: %b %d %Y
en_CA: %d %b %Y

en: Backup Evolution directory
en_CA: Back up Evolution directory

en: A plugin for backing up and restore Evolution data and settings.
en_CA: A plugin for backing up and restoring Evolution data and settings.

en: Backup Settings...
en_CA: Back Up Settings...

en: Backup and restore Evolution data and settings
en_CA: Back up and restore Evolution data and settings

note: Enable Gaim Checkbox
en: Periodically synchronize contact information and images from gaim buddy list
en_CA: Periodically synchronize contact information and images from Gaim buddy list

en: Provides core functionality for webcal and http calendars.
en_CA: Provides core functionality for WebCal and HTTP calendars.

en: Weather: Fog
en_CA: Weather: Foggy

en: Provides functionallity for marking a calendar or addressbook as the default one.
en_CA: Provides functionality for marking a calendar or addressbook as the default one.

en: Password Expiry Warning...
en_CA: Password Expiration Warning...

en: (Permission denied.)
en_CA: (Permission denied)

en: Addressbook...
en_CA: Address book...

en: A plugin that handles a collection of Exchange account specific operations and features.
en_CA: A plugin that handles a collection of Exchange account-specific operations and features.

en: If OWA is running on a different path, you must specify that in the account configuration dialog.
en_CA: If OWA is running on a different path, you must specify that in the account configuration dialogue.

en: No Global Catalog server configured for this account.
en_CA: No Global Catalogue server configured for this account.

en: Server rejected password because it is too weak.
en_CA: Server rejected password because it is too simple.

en: Sent to calendar '%s' as canceled
en_CA: Sent to calendar '%s' as cancelled

en: Sent a cancelation notice to the delegate
en_CA: Sent a cancellation notice to the delegate

en: Could not send the cancelation notice to the delegate
en_CA: Could not send the cancellation notice to the delegate

en: The message does contain a calendar, but the calendar contains no events, tasks or free/busy information
en_CA: The message contains a calendar, but the calendar contains no events, tasks or free/busy information

note: strftime format of a weekday, a date without a year and a time, in 24-hour format, without seconds.
en: %A, %B %e %H:%M
en_CA: %A, %e %B %H:%M

note: strftime format of a weekday, a date without a year and a time, in 24-hour format.
en: %A, %B %e %H:%M:%S
en_CA: %A, %e %B %H:%M:%S

note: strftime format of a weekday, a date without a year and a time, in 12-hour format, without seconds.
en: %A, %B %e %l:%M %p
en_CA: %A, %e %B %l:%M %p

note: strftime format of a weekday, a date without a year and a time, in 12-hour format.
en: %A, %B %e %l:%M:%S %p
en_CA: %A, %e %B %l:%M:%S %p

note: strftime format of a weekday and a date.
en: %A, %B %e, %Y
en_CA: %A, %e %B, %Y

note: strftime format of a weekday, a date and a time, in 24-hour format, without seconds.
en: %A, %B %e, %Y %H:%M
en_CA: %A, %e %B, %Y %H:%M

note: strftime format of a weekday, a date and a time, in 24-hour format.
en: %A, %B %e, %Y %H:%M:%S
en_CA: %A, %e %B, %Y %H:%M:%S

note: strftime format of a weekday, a date and a time, in 12-hour format, without seconds.
en: %A, %B %e, %Y %l:%M %p
en_CA: %A, %e %B, %Y %l:%M %p

note: strftime format of a weekday, a date and a time, in 12-hour format.
en: %A, %B %e, %Y %l:%M:%S %p
en_CA: %A, %e %B, %Y %l:%M:%S %p

en: <b>%s</b> through %s has canceled the following meeting:
en_CA: <b>%s</b> through %s has cancelled the following meeting:

en: <b>%s</b> has canceled the following meeting.
en_CA: <b>%s</b> has cancelled the following meeting.

en: <b>%s</b> through %s has canceled the following assigned task:
en_CA: <b>%s</b> through %s has cancelled the following assigned task:

en: <b>%s</b> has canceled the following assigned task:
en_CA: <b>%s</b> has cancelled the following assigned task:

en: _Un-subscribe to list
en_CA: _Un-subscribe from list

en: An e-mail message will be sent to the URL "{0}". You can either send the message automatically, or see and change it first.
    
    You should receive an answer from the mailing list shortly after the message has been sent.
en_CA: An e-mail message will be sent to the URL "{0}". You can either send the message automatically, or preview and change it first.
    
    You should receive an answer from the mailing list shortly after the message has been sent.

en: Unsubscribe to the mailing list this message belongs to
en_CA: Unsubscribe from the mailing list this message belongs to

note: * Translator: the %F %T is the thirth argument for a strftime function. * It lets you define the formatting of the date in the csv-file. *
en: %F %T
en_CA: %Y-%d-%m %T

en: Skip development warning dialog
en_CA: Skip development warning dialogue

en: The style of the window buttons. Can be "text", "icons", "both", "toolbar". If "toolbar" is set, the style of the buttons is determined by the GNOME toolbar setting.
en_CA: The style of the window buttons. Can be "text", "icons", "both", or "toolbar". If "toolbar" is set, the style of the buttons is determined by the GNOME toolbar setting.

en: Whether the warning dialog in development versions of Evolution is skipped.
en_CA: Whether the warning dialogue in development versions of Evolution is skipped.

en: Evolution can not start.
en_CA: Evolution cannot start.

en: The previous version of evolution stored its data in a different location.
    
    If you choose to remove this data, the entire contents of the &quot;evolution&quot; directory will be removed permanently. If you choose to keep this data, then you may manually remove the contents of &quot;evolution&quot; at your convenience.
en_CA: The previous version of evolution stored its data in a different location.
    
    If you choose to remove these data, the entire contents of the &quot;evolution&quot; directory will be removed permanently. If you choose to keep these data, then you may manually remove the contents of &quot;evolution&quot; at your convenience.

en: Because you trust the certificate authority that issued this certificate, then you trust the authenticity of this certificate unless otherwise indicated here
en_CA: Because you trust the certificate authority that issued this certificate, you then trust the authenticity of this certificate unless otherwise indicated here

en: Because you do not trust the certificate authority that issued this certificate, then you do not trust the authenticity of this certificate unless otherwise indicated here
en_CA: Because you do not trust the certificate authority that issued this certificate, you then do not trust the authenticity of this certificate unless otherwise indicated here

en: Query free / busy information for the attendees
en_CA: Query free/busy information for the attendees

en: Click change / view the status details of the task
en_CA: Click to change/view the status details of the task

en: <b>_Selection</b>
en_CA: <b>_Selection:</b>

en: GDK fill color
en_CA: GDK fill colour

en: Color Column
en_CA: Colour Column

en: BG Color Column
en_CA: BG Colour Column

en: Alternating Row Colors
en_CA: Alternating Row Colours

en: %s: canceled
en_CA: %s: cancelled

en: %s: there was no source for uid `%s' stored in gconf.
en_CA: %s: there was no source for UID `%s' stored in gconf.

en: Jabber Home Id 1
en_CA: Jabber Home ID 1

en: Jabber Home Id 2
en_CA: Jabber Home ID 2

en: Jabber Home Id 3
en_CA: Jabber Home ID 3

en: Jabber Work Id 1
en_CA: Jabber Work ID 1

en: Jabber Work Id 2
en_CA: Jabber Work ID 2

en: Jabber Work Id 3
en_CA: Jabber Work ID 3

en: ICQ Home Id 1
en_CA: ICQ Home ID 1

en: ICQ Home Id 2
en_CA: ICQ Home ID 2

en: ICQ Home Id 3
en_CA: ICQ Home ID 3

en: ICQ Work Id 1
en_CA: ICQ Work ID 1

en: ICQ Work Id 2
en_CA: ICQ Work ID 2

en: ICQ Work Id 3
en_CA: ICQ Work ID 3

en: GroupWise Id List
en_CA: GroupWise ID List

en: Jabber Id List
en_CA: Jabber ID List

en: ICQ Id List
en_CA: ICQ ID List

en: Gadu-Gadu Home Id 1
en_CA: Gadu-Gadu Home ID 1

en: Gadu-Gadu Home Id 2
en_CA: Gadu-Gadu Home ID 2

en: Gadu-Gadu Home Id 3
en_CA: Gadu-Gadu Home ID 3

en: Gadu-Gadu Work Id 1
en_CA: Gadu-Gadu Work ID 1

en: Gadu-Gadu Work Id 2
en_CA: Gadu-Gadu Work ID 2

en: Gadu-Gadu Work Id 3
en_CA: Gadu-Gadu Work ID 3

en: Gadu-Gadu Id List
en_CA: Gadu-Gadu ID List

en: Operation has been canceled
en_CA: Operation has been cancelled

en: Signature algorithm unsupported
en_CA: Siganture algorithm unsupported

en: Certificate is the only message, cannot verify certificates
en_CA: Certificate is the only message; cannot verify certificates

en: Certificate is the only message, certificates imported and verified
en_CA: Certificate is the only message; certificates imported and verified

en: User canceled
en_CA: User cancelled

en: Host or user not available in url
en_CA: Host or user not available in URL

en: Unable to authenticate to IMAP server.
    %s
en_CA: Unable to authenticate with IMAP server.
    %s

en: Enable Mailing-List detection required for some filter and vFolder rules
en_CA: Enable Mailing-List detection, required for some filter and vFolder rules

en: Connection canceled
en_CA: Connection cancelled

en: Cannot authenticate to IMAP server %s using the %s authentication mechanism
en_CA: Cannot authenticate with IMAP server %s using the %s authentication mechanism

en: Cannot authenticate to IMAP server %s using %s
en_CA: Cannot authenticate with IMAP server %s using %s

en: Experimental IMAP 4(.1) client
    This is untested and unsupported code, you want to use plain imap instead.
    
     !!! DO NOT USE THIS FOR PRODUCTION EMAIL  !!!
en_CA: Experimental IMAP 4(.1) client
    This is untested and unsupported code; you want to use plain IMAP instead.
    
     !!! DO NOT USE THIS FOR PRODUCTION EMAIL !!!

en: Maildir append message canceled
en_CA: Maildir append message cancelled

en: Mail append canceled
en_CA: Mail append cancelled

en: MH append message canceled
en_CA: MH append message cancelled

en: In the subscription dialog, show relative folder names
en_CA: In the subscription dialogue, show relative folder names

en: Cannot authenticate to server: %s
en_CA: Cannot authenticate with server: %s

en: Unable to authenticate to SMTP server.
    %s
en_CA: Unable to authenticate with SMTP server.
    %s

note: strptime format of a weekday, a date and a time, in 12-hour format, without seconds. strftime format of a weekday, a date and a time, in 12-hour format, without seconds.
en: %a %m/%d/%Y %I:%M %p
en_CA: %a %d/%m/%Y %I:%M %p

note: strptime format of a weekday, a date and a time, in 24-hour format, without seconds. strftime format of a weekday, a date and a time, in 24-hour format, without seconds.
en: %a %m/%d/%Y %H:%M
en_CA: %a %d/%m/%Y %H:%M

note: strptime format of a weekday, a date and a time, in 12-hour format, without minutes or seconds.
en: %a %m/%d/%Y %I %p
en_CA: %a %d/%m/%Y %I %p

note: strptime format of a weekday, a date and a time, in 24-hour format, without minutes or seconds.
en: %a %m/%d/%Y %H
en_CA: %a %d/%m/%Y %H

note: strptime format of a date and a time, in 12-hour format.
en: %m/%d/%Y %I:%M:%S %p
en_CA: %d/%m/%Y %I:%M:%S %p

note: strptime format of a date and a time, in 24-hour format.
en: %m/%d/%Y %H:%M:%S
en_CA: %d/%m/%Y %H:%M:%S

note: strptime format of a date and a time, in 12-hour format, without seconds.
en: %m/%d/%Y %I:%M %p
en_CA: %d/%m/%Y %I:%M %p

note: strptime format of a date and a time, in 24-hour format, without seconds.
en: %m/%d/%Y %H:%M
en_CA: %d/%m/%Y %H:%M

note: strptime format of a date and a time, in 12-hour format, without minutes or seconds.
en: %m/%d/%Y %I %p
en_CA: %d/%m/%Y %I %p

note: strptime format of a date and a time, in 24-hour format, without minutes or seconds.
en: %m/%d/%Y %H
en_CA: %d/%m/%Y %H

en: Category _Color
en_CA: Category _Colour

en: Favorite Public Folders
en_CA: Favourite Public Folders

note: dialog display isn't working out
en: Multiple segmentation faults occurred; cannot display error dialog
en_CA: Multiple segmentation faults occurred; cannot display error dialogue

en: We don't know how to store that kind of setting:
en_CA: Error storing setting:

en: An Unknown type of setting was found!
en_CA: Error reading setting

en: Rescan Collection
en_CA: Re-scan Collection

en: Plugin Archives
en_CA: Plug-in Archives

en: Installed Plugins
en_CA: Installed Plug-ins

en: <b>No Plugin Selected</b>
en_CA: <b>No Plug-in Selected</b>

en: Base color
en_CA: Base colour

en: Text Color:
en_CA: Text Colour:

en: Plugin to fetch lyrics from lyricsfly.com
en_CA: Plug-in to fetch lyrics from lyricsfly.com

en: This plugins displays notification bubbles when a song is played/resumed/stopped, with either the song cover or a media icon to indicate the latest action.
    
    Depends: python-notify
    Recommends: notify-osd
en_CA: This plug-ins displays notification bubbles when a song is played/resumed/stopped, with either the song cover or a media icon to indicate the latest action.
    
    Depends: python-notify
    Recommends: notify-osd

en: Searches Amazon for covers
    
    To be able to use this plugin, an AWS API key and secret key are required.
en_CA: Searches Amazon for covers
    
    To be able to use this plug-in, an AWS API key and secret key are required.

en: A simple plugin for testing the basic plugin system
en_CA: A simple plug-in for testing the basic plug-in system

en: Can't save non local files.
en_CA: Cannot save non-local files.

en: Unsupported image type for saving.
en_CA: Cannot save unsupported image type.

en: Exif Directory
en_CA: EXIF Directory

en: <b>Color Management</b>
en_CA: <b>Colour Management</b>

en: <b>Color Temperature</b>
en_CA: <b>Colour Temperature</b>

en: Ad_just Color...
en_CA: Ad_just Colour...

en: Adjust Color
en_CA: Adjust Colour

en: _Remove From Catalog
en_CA: _Remove From Catalogue

en: The directory you selected "{0}" does not exist.  Please choose a different directory
en_CA: The directory you selected, "{0}", does not exist.  Please choose a different directory

en: The hour minute and second the (HHMMSS+HHMM) the service sent the material
en_CA: The hour minute and second (HHMMSS+HHMM) the service sent the material

en: Name of the city the content is focussing on
en_CA: Name of the city the content is focusing on

en: F-Spot was unable to find any cameras attached to this system.  Double check that the camera is connected and has power
en_CA: F-Spot was unable to find any cameras attached to this system.  Double-check that the camera is connected and has power

note: Translators, The singular case will never happen here.
en: Merge the selected tag | Merge the {0} selected tags?
en_CA[0]: Merge the selected tag?
en_CA[1]: Merge the {0} selected tags?

en: _Ok
en_CA: _OK

en: Remove the selected photo from F-Spot? | Remove the {0} selected photos from F-Spot?
en_CA[0]: Remove the selected photo from F-Spot?
en_CA[1]: Remove the {0} selected photos from F-Spot??

en: If you remove photos from the F-Spot catalog all tag information will be lost. The photos remain on your computer and can be imported into F-Spot again.
en_CA: If you remove photos from the F-Spot catalogue all tag information will be lost. The photos will remain on your computer and can be imported into F-Spot again.

en: _Remove from Catalog
en_CA: _Remove from Catalogue

en: Can not delete tags that have tags within them.  Please delete tags under "{0}" first
en_CA: Cannot delete tags that have tags within them.  Please delete tags under "{0}" first

en: Color Space
en_CA: Colour Space

en: Remove From Catalog
en_CA: Remove From Catalogue

en: Adjust the photo colors
en_CA: Adjust the photo colours

en: You don't have permission to create an archive in this folder
en_CA: You do not have permission to create an archive in this folder

en: File Roller is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: File Roller is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: File Roller is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: File Roller is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with File Roller; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
en_CA: You should have received a copy of the GNU General Public Licence along with File Roller; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA

en: You don't have the right permissions to read files from folder "%s"
en_CA: You do not have the right permissions to read files from folder "%s"

en: You don't have the right permissions to create an archive in the destination folder.
en_CA: You do not have the right permissions to create an archive in the destination folder.

en: You don't have the right permissions to extract archives in the folder "%s"
en_CA: You do not have the right permissions to extract archives in the folder "%s"

en: You don't have the right permissions.
en_CA: You do not have the right permissions.

en: You can't add an archive to itself.
en_CA: You cannot add an archive to itself.

en: Ar (.ar)
en_CA: AR (.ar)

en: Arj (.arj)
en_CA: ARJ (.arj)

en: Ear (.ear)
en_CA: EAR (.ear)

en: Self-extracting zip (.exe)
en_CA: Self-extracting ZIP (.exe)

en: Jar (.jar)
en_CA: JAR (.jar)

en: Lha (.lzh)
en_CA: LHA (.lzh)

en: Rar (.rar)
en_CA: RAR (.rar)

en: War (.war)
en_CA: WAR (.war)

en: Zip (.zip)
en_CA: ZIP (.zip)

en: Zoo (.zoo)
en_CA: ZOO (.zoo)

en: Add files asking the name of the archive and quit the program
en_CA: Add files, asking the name of the archive, and quit the program

en: Extract archives asking the destination folder and quit the program
en_CA: Extract archives, asking the destination folder, and quit the program

en: Remove colored balls from the board by forming lines
en_CA: Remove coloured balls from the board by forming lines

en: B_ackground color:
en_CA: B_ackground colour:

en: Background color. The hex specification of the background color.
en_CA: Background colour. The hex specification of the background colour.

en: GNOME port of the once-popular Color Lines game.
    
    Five or More is a part of GNOME Games.
en_CA: GNOME port of the once-popular Colour Lines game.
    
    Five or More is a part of GNOME Games.

en: Make lines of the same color to win
en_CA: Make lines of the same colour to win

en: Color to use for worm
en_CA: Colour to use for worm

en: Color to use for worm.
en_CA: Colour to use for worm.

en: _Worm color:
en_CA: _Worm colour:

en: _Background color:
en_CA: _Background colour:

en: Mark new additions in a separate color so you can keep track of them.
en_CA: Mark new additions in a separate colour so you can keep track of them.

en: Game choice: Regular or Colors
en_CA: Game choice: Regular or Colours

[ctx: game type]
en: Colors
en_CA: Colours

en: Colors game and multi-level AI (2006):
en_CA: Colours game and multi-level AI (2006):

note: End of upper panel
en: 2 pair Same Color [total]
en_CA: 2 pair Same Colour [total]

en: Full House Same Color [20 + total]
en_CA: Full House Same Colour [20 + total]

en: Flush (all same color) [35]
en_CA: Flush (all same colour) [35]

en: Whether to give blocks random colors
en_CA: Whether to give blocks random colours

en: Whether to give blocks random colors.
en_CA: Whether to give blocks random colours.

en: Board color count
en_CA: Board colour count

en: The number of colors of tiles to use in the game.
en_CA: The number of colours of tiles to use in the game.

en: Number of colors:
en_CA: Number of colours:

en: Clear the screen by removing groups of colored and shaped tiles
en_CA: Clear the screen by removing groups of coloured and shaped tiles

en: Shapes and Colors
en_CA: Shapes and Colours

en: Block encoding, hides file name size somewhat
en_CA: truncate failure: read %i bytes, partial block of %i

en: Please select a key size in bits.  The cipher you have chosen
    supports sizes from %i to %i bits in increments of %i bits.
    For example:
en_CA: Please select a key size in bits. The cipher you have chosen
    supports sizes from %i to %i bits in increments of %i bits.
    For example:

en: Select a block size in bytes.  The cipher you have chosen
    supports sizes from %i to %i bytes in increments of %i.
    Or just hit enter for the default (%i bytes)
en_CA: Select a block size in bytes. The cipher you have chosen
    supports sizes from %i to %i bytes in increments of %i.
    Or just hit enter for the default (%i bytes)

en: Add random bytes to each block header?
    This adds a performance penalty, but ensures that blocks
    have different authentication codes.  Note that you can
    have the same benefits by enabling per-file initialization
    vectors, which does not come with as great of performance
    penalty. 
    Select a number of bytes, from 0 (no random bytes) to 8:
en_CA: Add random bytes to each block header?
    This adds a performance penalty, but ensures that blocks
    have different authentication codes. Note that you can
    have the same benefits by enabling per-file initialization
    vectors, which does not come with as great of performance
    penalty.
    Select a number of bytes, from 0 (no random bytes) to 8:

en: Enable filename to IV header chaining?
    This makes file data encoding dependent on the complete file path.
    If a file is renamed, it will not decode sucessfully unless it
    was renamed by encfs with the proper key.
    If this option is enabled, then hard links will not be supported
    in the filesystem.
en_CA: Enable filename to IV header chaining?
    This makes file data encoding dependent on the complete file path.
    If a file is renamed, it will not decode successfully unless it
    was renamed by encfs with the proper key.
    If this option is enabled, then hard links will not be supported
    in the filesystem.

en: Manual configuration mode selected.
en_CA: Sorry, unable to locate cipher for predefined configuration...
    Manual configuration mode selected.

en: Configuration finished.  The filesystem to be created has
    the following properties:
en_CA: Configuration finished. The filesystem to be created has
    the following properties:

en: The external initialization-vector chaining option has been
    enabled.  This option disables the use of hard links on the
    filesystem. Without hard links, some programs may not work.
    The programs 'mutt' and 'procmail' are known to fail.  For
    more information, please see the encfs mailing list.
    If you would like to choose another configuration setting,
    please press CTRL-C now to abort and start over.
en_CA: The external initialization-vector chaining option has been
    enabled. This option disables the use of hard links on the
    filesystem. Without hard links, some programs may not work.
    The programs 'mutt' and 'procmail' are known to fail. For
    more information, please see the encfs mailing list.
    If you would like to choose another configuration setting,
    please press CTRL-C now to abort and start over.

en: Now you will need to enter a password for your filesystem.
    You will need to remember this password, as there is absolutely
    no recovery mechanism.  However, the password can be changed
    later using encfsctl.
en_CA: Now you will need to enter a password for your filesystem.
    You will need to remember this password, as there is absolutely
    no recovery mechanism. However, the password can be changed
    later using encfsctl.

en:   -- decodes the file and cats it to standard out
en_CA:   -- show undecodable filenames in the volume

en:   -- decodes name and prints plaintext version
en_CA:   -- show undecodable filenames in the volume

en:   -- print version number and exit
en_CA:   -- decrypts a volume and writes results to path

en: Usage:
en_CA: -- decrypts a volume and writes results to path

en: %s (root dir)
      -- displays information about the filesystem, or
en_CA: %s (root dir)
    -- displays information about the filesystem, or

en: Example: 
    %s info ~/.crypt
en_CA: Example:
    %s info ~/.crypt

en: A really old EncFS filesystem was found. 
    It is not supported in this EncFS build.
en_CA: A really old EncFS filesystem was found.
    It is not supported in this EncFS build.

en: Note: requested single-threaded mode, but an idle
    timeout was specified.  The filesystem will operate
    single-threaded, but threads will still be used to
    implement idle checking.
en_CA: Note: requested single-threaded mode, but an idle
    timeout was specified. The filesystem will operate
    single-threaded, but threads will still be used to
    implement idle checking.

en: fuse failed.  Common problems:
     - fuse kernel module not installed (modprobe fuse)
     - invalid options -- see usage message
en_CA: fuse failed. Common problems:
     - fuse kernel module not installed (modprobe fuse)
     - invalid options -- see usage message

en: Advanced colors
en_CA: Advanced colours

en: Click on the correct color
en_CA: Click on the correct colour

en: Click on the correct colored box.
en_CA: Click on the correct coloured box.

en: Learn to recognize unusual colors.
en_CA: Learn to recognize unusual colours.

en: Practice the multiplication operation
en_CA: Practise the multiplication operation

en: Practice the subtraction operation
en_CA: Practise the subtraction operation

en: Practice the addition operation
en_CA: Practise the addition operation

en: Select a drawing tool on the left, and a color down the bottom. Then click and drag in the white area to create a new shape. Once you've completed a drawing, you can take a snapshot of it with the 'camera' button. This creates a new image with the same content, a copy of your image. You can then edit it by moving objects a little bit or adding/deleting objects. When you create several drawings and then click on the 'film' button, you will see all your images in a continuous slide-show (an infinite loop pattern). You can also change the viewing speed in this mode. In viewing mode, click on the 'drawing' button to return to drawing mode. You can then edit each image in your animation, by using the image selector in the bottom-left corner of the screen. You can also save and reload your animations with the 'floppy disk' and 'folder' buttons.
en_CA: Select a drawing tool on the left, and a colour down the bottom. Then click and drag in the white area to create a new shape. Once you've completed a drawing, you can take a snapshot of it with the 'camera' button. This creates a new image with the same content, a copy of your image. You can then edit it by moving objects a little bit or adding/deleting objects. When you create several drawings and then click on the 'film' button, you will see all your images in a continuous slide-show (an infinite loop pattern). You can also change the viewing speed in this mode. In viewing mode, click on the 'drawing' button to return to drawing mode. You can then edit each image in your animation, by using the image selector in the bottom-left corner of the screen. You can also save and reload your animations with the 'floppy disk' and 'folder' buttons.

en: Lock with colored shapes.
en_CA: Lock with coloured shapes.

en: Practice chess
en_CA: Practise chess

en: 1955 Citroën ds 19
en_CA: 1955 Citroën ds 199

en: Left-Click with the mouse on all the swimming fish before they leave the fishtank
en_CA: Left-click with the mouse on all the swimming fish before they leave the fishtank

en: Click on the right color
en_CA: Click on the right colour

en: Listen to the color and click on the matching duck.
en_CA: Listen to the colour and click on the matching duck.

en: This board teaches you to recognize different colors. When you hear the name of the color, click on the duck wearing it.
en_CA: This board teaches you to recognize different colours. When you hear the name of the colour, click on the duck wearing it.

en: Colors based activities.
en_CA: Colours based activities.

en: Go to Color activities
en_CA: Go to Colour activities

en: Colors, sounds, memory...
en_CA: Colours, sounds, memory...

en: Select a drawing tool on the left, and a color down the bottom, then click and drag in the white area to create a new shape. To save time, you can click with the middle mouse button to delete an object.
en_CA: Select a drawing tool on the left, and a colour down the bottom, then click and drag in the white area to create a new shape. To save time, you can click with the middle mouse button to delete an object.

en: gcompris animation
en_CA: GCompris animation

en: gcompris drawing
en_CA: GCompris drawing

en: svg drawing
en_CA: SVG drawing

en: svg mozilla animation
en_CA: SVG Mozilla animation

en: The map of Germany comes from Wikipedia and is released under the GNU Free Documentation License. Olaf Ronneberger and his children Lina and Julia Ronneberger created the German level.
en_CA: The map of Germany comes from Wikipedia and is released under the GNU Free Documentation Licence. Olaf Ronneberger and his children Lina and Julia Ronneberger created the German level.

en: Practice addition, subtraction, multiplication and division.
en_CA: Practise addition, subtraction, multiplication and division.

en: The object of the game is to move the entire stack to another peg, obeying the following rules:
    * only one disc may be moved at a time
    * no disc may be placed atop a smaller disc
en_CA: The object of the game is to move the entire stack to another peg, obeying the following rules:
    * only one disc may be moved at a time
    * no disc may be placed on top of a smaller disc

en: Practice reading by finding the word matching an image
en_CA: Practise reading by finding the word matching an image

en: Look at the magician, he tells the number of stars that are under his magic hat. Then, click on the hat to open it. A few stars escape. Click again on the hat to close it. You have to count how many are still under the hat. Click on the bottom right area to answer.
en_CA: Look at the magician.  He tells the number of stars that are under his magic hat. Then, click on the hat to open it. A few stars escape. Click again on the hat to close it. You have to count how many are still under the hat. Click on the bottom right area to answer.

en: Use the keyboard arrows to move Tux up to the door. In this maze, the move is relative (first person). Use the up arrow to go forward. The other arrow let you turn Tux in another direction.
en_CA: Use the keyboard arrows to move Tux up to the door. In this maze, the move is relative (first person). Use the up arrow to go forward. The other arrow lets you turn Tux in another direction.

en: Practise addition, subtraction, until all the cards are gone.
en_CA: Practise addition and subtraction, until all the cards are gone.

en: Additions
en_CA: Addition

en: Practise multiplication, division, until all the cards are gone.
en_CA: Practise multiplication and division, until all the cards are gone.

en: Practice money usage
en_CA: Practise money usage

en: Practice money usage including cents
en_CA: Practise money usage including cents

en: Click on the correct colored object.
en_CA: Click on the correct coloured object.

en: Click on the matching color
en_CA: Click on the matching colour

en: Read the names of colors
en_CA: Read the names of colours

en: This board teaches basic colors.
en_CA: This board teaches basic colours.

en: Practice subtraction with a fun game
en_CA: Practise subtraction with a fun game

en: The painting is an original painting created by Virginie MOREAU (virginie.moreau@free.fr) in 2001. Its name is 'Spices Seller in Egypt'. It is released under the GPL licence.
en_CA: The painting is an original painting created by Virginie MOREAU (virginie.moreau@free.fr) in 2001. Its name is 'Spices Seller in Egypt'. It is released under the GPL license.

en: Click on different active elements : engine, rudders and air tanks, in order to navigate to the required depth. There is a close gate on the right. Catch the jewel to open it, then pass through it to reach the next level.
en_CA: Click on different active elements: engine, rudders and air tanks, in order to navigate to the required depth. There is a close gate on the right. Catch the jewel to open it, then pass through it to reach the next level.

en: For the first level with colored symbols, drag symbols on the left to their target position. For the higher levels, click on an empty square to give it the keyboard focus. Then enter a possible letter or number. GCompris will not let you enter invalid data.
en_CA: For the first level with coloured symbols, drag symbols on the left to their target position. For the higher levels, click on an empty square to give it the keyboard focus. Then enter a possible letter or number. GCompris will not let you enter invalid data.

en: Click on the items until you find what you think is the correct answer. Then, click on the OK button in the control bar. In the lower levels, Tux gives you an indication if you found a hiding place by marking the item with a black box. You can use the right mouse button to flip the colors in the opposite order.
en_CA: Click on the items until you find what you think is the correct answer. Then, click on the OK button in the control bar. In the lower levels, Tux gives you an indication if you found a hiding place by marking the item with a black box. You can use the right mouse button to flip the colours in the opposite order.

en: Practice addition with a target game
en_CA: Practise addition with a target game

en: Type the complete word as it falls, before it reachs the ground
en_CA: Type the complete word as it falls, before it reaches the ground

en: In this wordprocessor you can type the text you want, save and get it back later. You can add some style to your text by using the buttons on the left. The first 4 buttons let you select the style of the line on which your insert cursor is. The 2 others buttons with multiple choices let you select from a predefined document and color theme.
en_CA: In this wordprocessor you can type the text you want, save and get it back later. You can add some style to your text by using the buttons on the left. The first 4 buttons let you select the style of the line on which your insert cursor is. The 2 others buttons with multiple choices let you select from a predefined document and colour theme.

en: Learn how to enter text in a wordprocessor. This wordprocessor is special in that it enforces the use of styles. This way, the children will understand their benefit when moving to more feature full wordprocessor like OpenOffice.org.
en_CA: Learn how to enter text in a wordprocessor. This wordprocessor is special in that it enforces the use of styles. This way, the children will understand their benefit when moving to more a feature-full wordprocessor like OpenOffice.org.

en: Not allowed! Try again !
en_CA: Not allowed! Try again!

en: Error: The external program gnuchess is required
    to play chess in GCompris.
    Find this program on http://www.rpmfind.net or in your
    GNU/Linux distribution
    And check it is located here:
en_CA: Error: The external program gnuchess is required
    to play chess in GCompris.
    Find this program on http://www.rpmfind.net or in your
    GNU/Linux distribution
    Ensure that it is located here:

en: Error: The external program gnuchess is mandatory
    to play chess in gcompris.
    First install it, and check it is in
en_CA: Error: The external program gnuchess is mandatory
    to play chess in gcompris.
    First install it, and ensure that it is in

en: Error: The external program gnuchess died unexpectingly
en_CA: Error: The external program gnuchess died unexpectedly

en: Error: this activity cannot be played with the
    sound effects disabled.
    Go to the configuration dialog to
    enable the sound
en_CA: Error: this activity cannot be played with the
    sound effects disabled.
    Go to the configuration dialogue to
    enable the sound

en: Error: this activity requires that you first install
    the packages with GCompris voices for the locale '%s' ! Fallback to english, sorry!
en_CA: Error: this activity requires that you first install
    the packages with GCompris voices for the locale '%s'!

en: Locales sound
en_CA: Sound locales

en: SVG is disabled. Install python xml module to enable it
en_CA: SVG is disabled. Install Python XML module to enable it

en: It is now possible to develop GCompris activities in C or in Python.
    Thanks to Olivier Samys who makes this possible.
en_CA: It is now possible to develop GCompris activities in C or in Python.
    Thanks to Olivier Samys for making this possible.

note: combo box
en: Color of the line
en_CA: Colour of the line

en: Cannot find Tuxpaint.
    Install it to use this activity !
en_CA: Cannot find Tuxpaint.
    Install it to use this activity!

en: Take care, you can drop masses on both sides of the scale.
en_CA: Take care: you can drop masses on both sides of the scale.

en: Wind speed = %d
    kilometers/hour
en_CA: Wind speed = %d
    kilometres/hour

en: Distance to target = %d meters
en_CA: Distance to target = %d metres

en: This software is a GNU Package and is released under the GNU General Public License
en_CA: This software is a GNU Package and is released under the GNU General Public Licence

en: English (United State)
en_CA: English (United States)

en: Couldn't find or load the file
en_CA: Could not find or load the file

en: run GCompris with the default gnome cursor.
en_CA: run GCompris with the default GNOME cursor.

en: display debug informations on the console.
en_CA: display debugging information on the console.

en: GCompris is free software released under the GPL License. In order to support its development, the Windows version provides only %d of the %d activities. You can get the full version for a small fee at
    <http://gcompris.net>
    The GNU/Linux version does not have this restriction. Note that GCompris is being developed to free schools from monopolistic software vendors. If you also believe that we should teach freedom to children, please consider using GNU/Linux. Get more information at FSF:
    <http://www.fsf.org/philosophy>
en_CA: GCompris is free software released under the GPL Licence. In order to support its development, the Windows version provides only %d of the %d activities. You can get the full version for a small fee at
    <http://gcompris.net>
    The GNU/Linux version does not have this restriction. Note that GCompris is being developed to free schools from monopolistic software vendors. If you also believe that we should teach freedom to children, please consider using GNU/Linux. Get more information at FSF:
    <http://www.fsf.org/philosophy>

en: Put any number of images in this directory.
    You can include these images in your drawings and animations.
    The image formats supported are jpeg, png and svg.
en_CA: Put any number of images in this directory.
    You can include these images in your drawings and animations.
    The image formats supported are JPEG, PNG and SVG.

en: Show the about dialog for the Configuration Editor
en_CA: Show the about dialogue for the Configuration Editor

en: Configuration Editor (Defaults settings)
en_CA: Configuration Editor (Default settings)

en: File doesn't exist or couldn't be loaded
en_CA: File does not exist or could not be loaded

en: A file which contains a script isn't available for further execution.
en_CA: A file which contains a script is not available for further execution.

en: You must NOT run gDesklets as super user (root).
en_CA: You must NOT run gDesklets as superuser (root).

en: SAX parser is required, some SuSE versions ship without it.
en_CA: SAX parser is required, but some SuSE versions ship without it.

en: Please make sure that the required software is installed.
    Also try to avoid having multiple versions of a library/binding on your system.
    gDesklets won't work if you don't have all necessary dependencies installed
    on your system.
    
    THE STARTUP WILL BE CANCELLED NOW!
en_CA: Please make sure that the required software is installed.
    Also, try to avoid having multiple versions of a library/binding on your system.
    gDesklets will not work if you do not have all necessary dependencies installed
    on your system.
    
    THE STARTUP WILL BE CANCELLED NOW!

en: 
    You're running gDesklets for the first time.
    gDesklets will start a requirements check now...
en_CA: 
    You are running gDesklets for the first time.
    gDesklets will start a requirements check now...

en: 
    Orders:
      open    <files>   (Opens the given desklet files)
      start             (Runs the gDesklets daemon, this is default)
      stop              (Stops the gDesklets daemon)
      list              (Lists open desklets)
      restart           (Restarts the gDesklets daemon)
      profile <profile> (Switches to the given profile)
      profile           (Shows the current and the available profiles)
      shell             (Opens the graphical shell)
      slay              (Kills the daemon -- use in emergency)
      status            (Checks daemon status)
      about             (Prints information about gDesklets)
      version           (Prints gDesklets version)
      configure         (Opens the configuration dialog)
      help              (Displays this text)
      check             (Checks requirements)
en_CA: 
    Orders:
      open    <files>   (Opens the given desklet files)
      start             (Runs the gDesklets daemon, this is default)
      stop              (Stops the gDesklets daemon)
      list              (Lists open desklets)
      restart           (Restarts the gDesklets daemon)
      profile <profile> (Switches to the given profile)
      profile           (Shows the current and the available profiles)
      shell             (Opens the graphical shell)
      slay              (Kills the daemon -- use in emergency)
      status            (Checks daemon status)
      about             (Prints information about gDesklets)
      version           (Prints gDesklets version)
      configure         (Opens the configuration dialogue)
      help              (Displays this text)
      check             (Checks requirements)

en: Currently there aren't any desklets in profile "%s"
en_CA: Currently there are no desklets in profile "%s"

en: Cannot establish connection to daemon: timeout!
    The log file might help you solving the problem.
en_CA: Cannot establish connection to daemon: connection timeout
    The log file might help in solving the problem.

en: This is a unstable version of gDesklets. Unstable versions represent the current state of development and might be unstable or cause problems from time to time.
    
    If you're new to gDesklets, it is thus highly recommended to <b>not</b> use this version, but a stable release!
    
    If you still want to run the unstable version instead of a stable release version, we'd highly appreciate it if you report any weird behavior to the developers.
    
    Experienced users are encouraged to try a bzr version, though!
en_CA: This is a unstable version of gDesklets. Unstable versions represent the current state of development and might be unstable or cause problems from time to time.
    
    If you're new to gDesklets, it is thus highly recommended to <b>not</b> use this version, but a stable release!
    
    If you still want to run the unstable version instead of a stable release version, we'd highly appreciate it if you report any weird behaviour to the developers.
    
    Experienced users are encouraged to try a bzr version, though!

en: "%s" isn't a valid integer value!
en_CA: "%s" is not a valid integer value!

en: No Control could be found for interface %s
en_CA: No control found for interface %s

en: Font color #%i:
en_CA: Font colour #%i:

en: Font color #%i used in the labels
en_CA: Font colour #%i used in the labels

en: Do you really want to remove this desklet ?
en_CA: Do you really want to remove this desklet?

en: Topdown BMP images cannot be compressed
en_CA: Top-down BMP images cannot be compressed

en: Couldn't allocate memory for saving BMP file
en_CA: Could not allocate memory for saving BMP file

en: Couldn't write to BMP file
en_CA: Could not write to BMP file

en: GIF image has no global colormap, and a frame inside it has no local colormap.
en_CA: GIF image has no global colourmap, and a frame inside it has no local colourmap.

en: Couldn't allocate memory for color profile
en_CA: Couldn't allocate memory for colour profile

en: Unsupported JPEG color space (%s)
en_CA: Unsupported JPEG colour space (%s)

en: Maximum color value in PNM file is 0
en_CA: Maximum colour value in PNM file is 0

en: Maximum color value in PNM file is too large
en_CA: Maximum colour value in PNM file is too large

en: Cannot allocate colormap structure
en_CA: Cannot allocate colourmap structure

en: Cannot allocate colormap entries
en_CA: Cannot allocate colourmap entries

en: Unexpected bitdepth for colormap entries
en_CA: Unexpected bitdepth for colourmap entries

en: XPM file has invalid number of colors
en_CA: XPM file has invalid number of colours

en: Cannot read XPM colormap
en_CA: Cannot read XPM colourmap

en: Alternative configuration file
en_CA: Alternate configuration file

en: %s: TimedLoginDelay is less than 5, defaulting to 5.
en_CA: %s: TimedLoginDelay is less than 5; defaulting to 5.

en: %s: Can't find the GDM user '%s'. Aborting!
en_CA: %s: Cannot find the GDM user '%s'. Aborting!

en: %s: Can't find the GDM group '%s'. Aborting!
en_CA: %s: Cannot find the GDM group '%s'. Aborting!

en: %s: Greeter not found or can't be executed by the GDM user
en_CA: %s: Greeter not found or cannot be executed by the GDM user

en: %s: Remote greeter not found or can't be executed by the GDM user
en_CA: %s: Remote greeter not found or cannot be executed by the GDM user

en: %s: Chooser not found or it can't be executed by the GDM user
en_CA: %s: Chooser not found or it cannot be executed by the GDM user

en: There already appears to be an X server running on display %s.  Should another display number by tried?  Answering no will cause GDM to attempt starting the server on %s again.%s
en_CA: There already appears to be an X server running on display %s.  Should another display number by tried?  Answering no will cause GDM to attempt to start the server on %s again. %s

en: %s: Server priority couldn't be set to %d: %s
en_CA: %s: Server priority could not be set to %d: %s

en: Login sound requested on non-local display or the play software cannot be run or the sound does not exist.
en_CA: Login sound requested on non-local display, the play software cannot be run, or the sound does not exist.

en: %s: Can't init pipe to gdmgreeter
en_CA: %s: Cannot init pipe to gdmgreeter

en: Could not start the regular X server (your graphical environment) and so this is a failsafe X server.  You should log in and properly configure the X server.
en_CA: The regular X server (your graphical environment) could not be started, so this is a failsafe X server.  You should log in and properly configure the X server.

en: %s: Can't fork gdmgreeter process
en_CA: %s: Cannot fork gdmgreeter process

en: %s: Can't init pipe to gdmchooser
en_CA: %s: Cannot init pipe to gdmchooser

en: %s: Can't fork gdmchooser process
en_CA: %s: Cannot fork gdmchooser process

en: Can't find PAM configuration for GDM.
en_CA: Cannot find PAM configuration for GDM.

en: Don't check for running GDM
en_CA: Do not check for running GDM

en: You do not seem to have the authentication needed for this operation.  Perhaps your .Xauthority file is not set up correctly.
en_CA: You do not seem to have the authentication needed for this operation.  Your .Xauthority file may be set up incorrectly.

en: %a %b %d, %H:%M
en_CA: %a %d %b, %H:%M

note: Translators: You should translate time part as %H:%M if your language does not have AM and PM equivalent.  Note: %l is a strftime option for 12-hour clock format
en: %a %b %d, %l:%M %p
en_CA: %a %d %b, %l:%M %p

en: The configuration file contains an invalid command line for the login dialog, so running the default command.  Please fix your configuration.
en_CA: The configuration file contains an invalid command line for the login dialogue, so the default command will be run.  Please fix your configuration.

en: This is a failsafe session that will log you into GNOME. No startup scripts will be read and it is only to be used when you can't log in otherwise.  GNOME will use the 'Default' session.
en_CA: This is a failsafe session that will log you into GNOME. No startup scripts will be read and it is only to be used when you cannot log in otherwise.  GNOME will use the 'Default' session.

en: This is a failsafe session that will log you into a terminal.  No startup scripts will be read and it is only to be used when you can't log in otherwise.  To exit the terminal, type 'exit'.
en_CA: This is a failsafe session that will log you into a terminal.  No startup scripts will be read and it is only to be used when you cannot log in otherwise.  To exit the terminal, type 'exit'.

note: FIXME: if exists already perhaps we could also have an * option to change the dir name
en: Theme directory '%s' seems to be already installed. Install again anyway?
en_CA: Theme directory '%s' seems to be installed already. Install again anyway?

en: Some error occurred when installing the theme
en_CA: An error occurred when installing the theme

en: If you don't apply, the changes made on the Users tab will be disregarded.
en_CA: If you do not apply, the changes made on the Users tab will be disregarded.

en: Co_lor:
en_CA: Co_lour:

en: Color depth:
en_CA: Colour depth:

en: Honor _indirect requests
en_CA: Honour _indirect requests

en: Pick Background Color
en_CA: Pick Background Colour

en: _Allow users to change fonts and colors of plain greeter
en_CA: _Allow users to change fonts and colours of plain greeter

en: The GTK+ greeter could not be started.  This display will abort and you may have to login another way and fix the installation of GDM
en_CA: The GTK+ greeter could not be started.  This display will abort and you may have to log in another way and fix the installation of GDM

en: Your session directory is missing or empty!  There are two available sessions you can use, but you should log in and correct the gdm configuration.
en_CA: Your session directory is missing or empty!  There are two available sessions you can use, but you should log in and correct the GDM configuration.

en: An error occurred while loading user interface element %s%s from file %s.  Possibly the glade interface description was corrupted.  %s cannot continue and will exit now.  You should check your installation of %s or reinstall %s.
en_CA: An error occurred while loading user interface element %s%s from file %s.  The glade interface description may be corrupted.  %s cannot continue and will exit now.  You should check your installation of %s or reinstall %s.

en: An error occurred while loading the user interface element %s%s from file %s. CList type widget should have %d column. Possibly the glade interface description was corrupted. %s cannot continue and will exit now. You should check your installation of %s or reinstall %s. | An error occurred while loading the user interface element %s%s from file %s. CList type widget should have %d columns. Possibly the glade interface description was corrupted. %s cannot continue and will exit now. You should check your installation of %s or reinstall %s.
en_CA[0]: An error occurred while loading the user interface element %s%s from file %s. CList type widget should have %d column. The glade interface description may be corrupted. %s cannot continue and will exit now. You should check your installation of %s or reinstall %s.
en_CA[1]: An error occurred while loading the user interface element %s%s from file %s. CList type widget should have %d columns. The glade interface description may be corrupted. %s cannot continue and will exit now. You should check your installation of %s or reinstall %s.

note: / Verbose datetime format for 24-hour time, i.e. November 8, 2010 16:35 / See http://developer.gnome.org/glib/2.32/glib-GDateTime.html#g-date-time-format
en: %B %-e, %Y %-H:%M
en_CA: %-e %B, %Y %-H:%M

note: / Verbose datetime format for 12-hour time, i.e. November 8, 2010 8:42 am / See http://developer.gnome.org/glib/2.32/glib-GDateTime.html#g-date-time-format
en: %B %-e, %Y %-l:%M %P
en_CA: %-e %B, %Y %-l:%M %P

[ctx: Default full date]
note: / Verbose datetime format for the locale default (full month, day and time) / See http://developer.gnome.org/glib/2.32/glib-GDateTime.html#g-date-time-format
en: %B %-e, %Y %-l:%M %P
en_CA: %-e %B, %Y %-l:%M %P

note: / Format for the datetime that a message being replied to was received / See http://developer.gnome.org/glib/2.32/glib-GDateTime.html#g-date-time-format
en: %a, %b %-e, %Y at %-l:%M %p
en_CA: %a, %-e %b, %Y at %-l:%M %p

note: / Date format for dates within the current year, i.e. Nov 8 / See http://developer.gnome.org/glib/2.32/glib-GDateTime.html#g-date-time-format
en: %b %-e
en_CA: %-e %b

en: Are you sure you want to open "%s"?
en_CA: Are you sure you want to open '%s'?

en: C_olor
en_CA: C_olour

note: / "Normalization" can also be called "synchronization"
en: Log folder normalization
en_CA: Log folder normalisation

note: / Serialization is how commands and responses are converted into a stream of bytes for / network transmission
en: Log network serialization
en_CA: Log network serialisation

en: Please enter your email password
en_CA: Please enter your e-mail password

en: Send and receive email
en_CA: Send and receive e-mail

en: Unable to login to email server
en_CA: Unable to log-in to e-mail server

en: Unrecognized command line option "%s"
en_CA: Unrecognised command line option '%s'

en: Background color for selected text in the editing area. This will only take effect if the "Use Default Colors" option is turned off.
en_CA: Background colour for selected text in the editing area. This will only take effect if the "Use Default Colours" option is turned off.

en: Background color for unselected text in the editing area. This will only take effect if the "Use Default Colors" option is turned off.
en_CA: Background colour for unselected text in the editing area. This will only take effect if the "Use Default Colours" option is turned off.

en: Foreground color for selected text in the editing area. This will only take effect if the "Use Default Colors" option is turned off.
en_CA: Foreground colour for selected text in the editing area. This will only take effect if the "Use Default Colours" option is turned off.

en: Foreground color for the unselected text in the editing area. This will only take effect if the "Use Default Colors" option is turned off.
en_CA: Foreground colour for the unselected text in the editing area. This will only take effect if the "Use Default Colours" option is turned off.

en: Max Number of Undo Actions
en_CA: Maxmum Number of Undo Actions

en: Selected Text Color
en_CA: Selected Text Colour

en: Selection Color
en_CA: Selection Colour

en: Use Default Colors
en_CA: Use Default Colours

en: Whether the bottom panel at the bottom of editing windows should be visible.
en_CA: Whether the panel at the bottom of editing windows should be visible.

en: Whether to use the system's default colors for the editing area. If this option is turned off, then the colors of the editing area will be those specified in the "Background Color", "Text Color", "Selected Text Color", and "Selection Color" options.
en_CA: Whether to use the system's default colours for the editing area. If this option is turned off, then the colours of the editing area will be those specified in the "Background Colour", "Text Colour", "Selected Text Colour", and "Selection Colour" options.

en: Logout _without Saving
en_CA: Log Out _without Saving

en: Push this button to configure text color
en_CA: Push this button to configure text colour

en: Push this button to configure background color
en_CA: Push this button to configure background colour

en: Push this button to configure the color in which the selected text should appear
en_CA: Push this button to configure the colour in which the selected text should appear

en: Push this button to configure the color in which the selected text should be marked
en_CA: Push this button to configure the colour in which the selected text should be marked

en: <span weight="bold">Colors</span>
en_CA: <span weight="bold">Colours</span>

en: Font & Colors
en_CA: Font & Colours

en: Normal _text color:
en_CA: Normal _text colour:

en: Pick the background color
en_CA: Pick the background colour

en: Pick the normal text color
en_CA: Pick the normal text colour

en: Pick the selected text color
en_CA: Pick the selected text colour

en: Pick the selection color
en_CA: Pick the selection colour

en: Se_lection color:
en_CA: Se_lection colour:

en: Selecte_d text color:
en_CA: Selecte_d text colour:

en: U_se default theme colors
en_CA: U_se default theme colours

en: Found and replaced %d occurrence | Found and replaced %d occurrences
en_CA[0]: Found and replaced %d occurrence.
en_CA[1]: Found and replaced %d occurrences.

en: There are too many open files. Please, close some applications and try again.
en_CA: There are too many open files. Close some open applications and try again.

en: Not enough available memory to open the file. Please, close some running applications and try again.
en_CA: Not enough available memory to open the file. Close some running applications and try again.

en: Host name was invalid. Please, check that you typed the location correctly and try again.
en_CA: Host name was invalid. Check that you typed the location correctly and try again.

en: gedit cannot find it. Perhaps, it has recently been deleted.
en_CA: gedit cannot find it. Perhaps it has recently been deleted.

en: _Don't Edit
en_CA: _Do Not Edit

en: gedit cannot handle this location  in write mode. Please, check that you typed the location correctly and try again.
en_CA: gedit cannot handle this location in write mode. Check that you typed the location correctly and try again.

en: %s is not a valid location. Please, check that you typed the location correctly and try again.
en_CA: %s is not a valid location. Check that you typed the location correctly and try again.

en: You do not have the permissions necessary to save the file. Please, check that you typed the location correctly and try again.
en_CA: You do not have the permissions necessary to save the file. Check that you typed the location correctly and try again.

en: %s is a directory. Please, check that you typed the location correctly and try again.
en_CA: %s is a directory. Check that you typed the location correctly and try again.

en: Not enough available memory to save the file. Please, close some running applications and try again.
en_CA: Not enough available memory to save the file. Close some running applications and try again.

en: There is not enough disk space to save the file. Please, free some disk space and try again.
en_CA: There is not enough disk space to save the file. Please free some disk space and try again.

en: You are trying to save the file on a read-only disk. Please, check that you typed the location correctly and try again.
en_CA: You are trying to save the file on a read-only disk. Check that you typed the location correctly and try again.

en: A file with the same name already exists. Please, use a different name.
en_CA: A file with the same name already exists. Please use a different name.

en: The disk where you are trying to save the file has a limitation on length of the file names. Please, use a shorter name.
en_CA: The disk where you are trying to save the file has a limitation on length of the file names. Please try again, using a shorter name.

en: %s is not a regular file. Please, check that you typed the location correctly and try again.
en_CA: %s is not a regular file. Check that you typed the location correctly and try again.

en: Invert the case of selected text
en_CA: Invert the case of the selected text

en: Emacs, Kate and Vim-style modelines support for gedit.
en_CA: EMACS, Kate and Vim-style modelines support for gedit.

en: Border color
en_CA: Border colour

en: Color of selected links
en_CA: Colour of selected links

en: Header cell ID's
en_CA: Header cell IDs

en: Link color
en_CA: Link colour

en: ReadOnly text and password
en_CA: Read-Only text and password

en: Topmargin in pixels
en_CA: Top margin in pixels

en: Visited link color
en_CA: Visited link colour

en: Function sine
en_CA: Function sin

en: Maths (display)
en_CA: Math (display)

en: Maths (inline)
en_CA: Math (inline)

en: Symbol d-by-dt
en_CA: Symbol derivative

en: Symbol d-by-dt-partial
en_CA: Symbol partial derivative

en: Symbol d2-by-dt2-partial
en_CA: Symbol partial second derivative

en: preceding
en_CA: preceeding

en: preceding-sibling
en_CA: preceeding-sibling

en: Pick a color from a dialog and insert its hexadecimal representation.
en_CA: Pick a colour from a dialogue and insert its hexadecimal representation.

en: How many iterations to try to find the limit for continuity and limits
en_CA: Number of iterations to try to find the limit for continuity and limits

en: Division w/o remainder
en_CA: Division without remainder

en: Logarithm of any base (calls DiscreteLog if in modulo mode), if base is not given, e is used
en_CA: Logarithm of any base (calls DiscreteLog if in modulo mode). If base is not given, e is used

en: Given two factorizations, give the factorization of the product, see Factorize
en_CA: Given two factorizations, give the factorization of the product. See Factorize

en: Find discrete log of n base b in F_q where q is a prime using the Silver-Pohlig-Hellman algoritm
en_CA: Find discrete log of n base b in F_q, where q is a prime using the Silver-Pohlig-Hellman algoritm

en: Compute phi(n), the Euler phi function, that is the number of integers between 1 and n relatively prime to n
en_CA: Compute phi(n), the Euler phi function, the number of integers between 1 and n relatively prime to n

en: Attempt fermat factorization of n into (t-s)*(t+s), returns t and s as a vector if possible, null otherwise
en_CA: Attempt Fermat factorization of n into (t-s)*(t+s). Returns t and s as a vector if possible, null otherwise

en: Check if g is primitive in F_q, where q is a prime.  If q is not prime results are bogus.
en_CA: Check if g is primitive in F_q, where q is a prime.  Results are bogus if q is not prime.

en: Check if g is primitive in F_q, where q is a prime and f is a vector of prime factors of q-1.  If q is not prime results are bogus.
en_CA: Check if g is primitive in F_q, where q is a prime and f is a vector of prime factors of q-1.  Results are bogus if q is not prime.

en: Calculate the kth compund matrix of A
en_CA: Calculate the kth compound matrix of A

en: Apply the Gram-Schmidt process (to the columns) with respect to innter product given by #2
en_CA: Apply the Gram-Schmidt process (to the columns) with respect to inner product given by #2

en: Get the jordan block corresponding to lambda and n
en_CA: Get the Jordan block corresponding to lambda and n

en: Return pivot columns of a matrix, that is columns which have a leading 1 in rref form, also returns the row where they occur
en_CA: Return pivot columns of a matrix, columns which have a leading 1 in rref form. Also returns the row where they occur

en: Calculate n'th fibbonachi number
en_CA: Calculate nth Fibbonacci number

en: Get the pascal's triangle as a matrix
en_CA: Get the Pascal's triangle as a matrix

en: Returns 1 iff all elements are zero
en_CA: Returns 1 if all elements are zero

en: Returns 1 iff all elements are equal
en_CA: Returns 1 if all elements are equal

en: Moebius mapping using the cross ratio taking infinity to infinity and z2,z3 to 1 and 0 respectively
en_CA: Moebius mapping using the cross ratio taking z2,z3,z4 to 1,0, and infinity respectively

en: Run newton's method on a polynomial to attempt to find a root, returns after two successive values are within epsilon or after maxn tries (then returns null)
en_CA: Run Newton's method on a polynomial to attempt to find a root. Returns after two successive values are within epsilon or after maxn tries (then returns null)

en: Can't add/subtract a scalar to non-square matrix (A + x is defined as A + x*I)
en_CA: Cannot add/subtract a scalar to non-square matrix (A + x is defined as A + x*I)

en: Can't add/subtract two matricies of different sizes
en_CA: Cannot add/subtract two matricies of different sizes

en: Can't do element by element operations on two matricies of different sizes
en_CA: Cannot do element by element operations on two matricies of different sizes

en: Can't multiply matricies of wrong sizes
en_CA: Cannot multiply matricies of wrong sizes

en: Variable '%s' used uninitialized, perhaps you meant %s.
en_CA: Variable '%s' used uninitialized; perhaps you meant %s.

en: Function '%s' used uninitialized, perhaps you meant %s.
en_CA: Function '%s' used uninitialized; perhaps you meant %s.

en: Genius %s
    %s
    
        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation; either version 2 of the License , or
        (at your option) any later version.
    
        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.
    
        You should have received a copy of the GNU General Public License
        along with this program. If not, write to the Free Software
        Foundation,  Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
        USA.
en_CA: Genius %s
    %s
    
        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public Licence as published by
        the Free Software Foundation; either version 2 of the Licence, or
        (at your option) any later version.
    
        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public Licence for more details.
    
        You should have received a copy of the GNU General Public Licence
        along with this program. If not, write to the Free Software
        Foundation,  Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
        USA.

en: Identity function, returns its argument
en_CA: Identity function: returns its argument

en: Return n/d but only if d divides n else returns garbage (this is faster than writing n/d)
en_CA: Return n/d but only if d divides n, else return garbage (this is faster than writing n/d)

en: Integration of f by Composite Simpson's Rule on the interval [a,b] with n subintervals with error of max(f'''')*h^4*(b-a)/180, note that n should be even
en_CA: Integration of f by Composite Simpson's Rule on the interval [a,b] with n subintervals with error of max(f'''')*h^4*(b-a)/180. Note that n should be even

en: %s should be between %d and %d, using %d
en_CA: %s should be between %d and %d. Using %d

en: %s should be greater then or equal to %d, using %d
en_CA: %s should be greater then or equal to %d. Using %d

en: Genius %s
    %s
    This is free software with ABSOLUTELY NO WARRANTY.
    For license details type `warranty'.
    For help type 'manual' or 'help'.%s
en_CA: Genius %s
    %s
    This is free software with ABSOLUTELY NO WARRANTY.
    For licence details type `warranty'.
    For help type 'manual' or 'help'.%s

en: The Gnome calculator style edition of the genius calculator.  For license/warranty details, type 'warranty' into the console.
en_CA: The Gnome calculator style edition of the genius calculator.  For licence/warranty details, type 'warranty' into the console.

en: %sGenius %s%s
    %s
    This is free software with ABSOLUTELY NO WARRANTY.
    For license details type `%swarranty%s'.
    For help type '%smanual%s' or '%shelp%s'.%s
en_CA: %sGenius %s%s
    %s
    This is free software with ABSOLUTELY NO WARRANTY.
    For licence details type `%swarranty%s'.
    For help type '%smanual%s' or '%shelp%s'.%s

en: Cannot open temporary file, cannot print.
en_CA: Cannot open temporary file; cannot print.

en: %s: No color specified
en_CA: %s: No colour specified

en: %s: Color must be a string
en_CA: %s: Colour must be a string

en: %s: No thicnkess specified
en_CA: %s: No thickness specified

en: Can't convert complex number into a double
en_CA: Cannot convert complex number into a double

en: That's it, isn't this fun
en_CA: That's it. Isn't this fun?

en: Remote LC_TIME:
en_CA: Remove LC_TIME:

en: Preserve file times of transfered files
en_CA: Preserve file times of transferred files

en: The number of auto-retries to do. Set this to 0 to retry indefinitely
en_CA: The number of times to auto-retry. Set this to 0 to retry indefinitely

en: The block size that is used when transfering files. This should be a multiple of 1024.
en_CA: The block size that is used when transferring files. This should be a multiple of 1024.

en: The color of the commands that are sent to the server
en_CA: The colour of the commands that are sent to the server

en: The color of the commands that are received from the server
en_CA: The colour of the commands that are received from the server

en: The color of the error messages
en_CA: The colour of the error messages

en: The color of the rest of the log messages
en_CA: The colour of the rest of the log messages

en: If this is enabled, then the remote FTP server's PASV IP address field will be ignored and the host's IP address will be used instead. This is often needed for routers giving their internal rather then their external IP address in a PASV reply.
en_CA: If this is enabled, then the remote FTP server's PASV IP address field will be ignored and the host's IP address will be used instead. This is often needed for routers that give their internal rather then their external IP address in a PASV reply.

en: Ignoring IP address in PASV response, connecting to %d.%d.%d.%d:%d
en_CA: Ignoring IP address in PASV response; connecting to %d.%d.%d.%d:%d

en: Operation canceled
en_CA: Operation cancelled

en: Operation canceled...you must enter a string
en_CA: Operation cancelled...you must enter a string

en: Change Filespec: Operation canceled...you must enter a string
en_CA: Change Filespec: Operation cancelled...you must enter a string

en: Cannot find the license agreement file COPYING. Please make sure it is in either %s or in %s
en_CA: Cannot find the licence agreement file COPYING. Please make sure it is in either %s or in %s

en: Connect to the site specified in the host entry. If the host entry is blank, then a dialog is presented that will allow you to enter a URL.
en_CA: Connect to the site specified in the host entry. If the host entry is blank, then a dialogue is presented that will allow you to enter a URL.

en: Edit: You must specify an editor in the options dialog
en_CA: Edit: You must specify an editor in the options dialogue

en: Can not open URI:
    %s
en_CA: Cannot open URI:
    %s

en: Released under the terms of GNU Public License
en_CA: Released under the terms of GNU Public Licence

en: Show license information and exit
en_CA: Show licence information and exit

en: Send messages to console instead of using a dialog
en_CA: Send messages to console instead of using a dialogue box

en: Colormap
en_CA: Colourmap

en: Dialogs
en_CA: Dialogues

en: Edit Channel Color
en_CA: Edit Channel Colour

en: New Channel Color
en_CA: New Channel Colour

en: Edit colormap entry #%d
en_CA: Edit colourmap entry #%d

en: Edit Colormap Entry
en_CA: Edit Colourmap Entry

en: Are you sure you want to remove '%s' from the list and delete it on disk?
en_CA: Are you sure you want to remove '%s' from the list and delete it from disk?

en: White Balance operates only on RGB color layers.
en_CA: White Balance operates only on RGB colour layers.

en: Coloring _Type for Segment
en_CA: Colouring _Type for Segment

en: Re-_center Segment's Midpoint
en_CA: Re-_centre Segment's Midpoint

en: Coloring _Type for Selection
en_CA: Colouring _Type for Selection

en: Re-_center Midpoints in Selection
en_CA: Re-_centre Midpoints in Selection

en: Left Endpoint Color
en_CA: Left Endpoint Colour

en: Gradient Segment's Left Endpoint Color
en_CA: Gradient Segment's Left Endpoint Colour

en: Right Endpoint Color
en_CA: Right Endpoint Colour

en: Gradient Segment's Right Endpoint Color
en_CA: Gradient Segment's Right Endpoint Colour

en: Edit Palette Color
en_CA: Edit Palette Colour

en: Edit Color Palette Entry
en_CA: Edit Colour Palette Entry

en: Edit Quick Mask Color
en_CA: Edit Quick Mask Colour

en: Set Canvas Padding Color
en_CA: Set Canvas Padding Colour

en: Set Custom Canvas Padding Color
en_CA: Set Custom Canvas Padding Colour

en: Sets the canvas padding color used if the padding mode is set to custom color.
en_CA: Sets the canvas padding colour used if the padding mode is set to custom colour.

en: How to handle embedded color profiles when opening a file.
en_CA: How to handle embedded colour profiles when opening a file.

en: Install a private colormap; might be useful on 8-bit (256 colors) displays.
en_CA: Install a private colourmap; might be useful on 8-bit (256 colour) displays.

en: Generally only a concern for 8-bit displays, this sets the minimum number of system colors allocated for GIMP.
en_CA: Generally only a concern for 8-bit displays, this sets the minimum number of system colours allocated for GIMP.

en: Sets the preview size used for layers and channel previews in newly created dialogs.
en_CA: Sets the preview size used for layers and channel previews in newly created dialogues.

en: Remember the current tool, pattern, color, and brush across GIMP sessions.
en_CA: Remember the current tool, pattern, colour, and brush across GIMP sessions.

en: Save the positions and sizes of the main dialogs when GIMP exits.
en_CA: Save the positions and sizes of the main dialogues when GIMP exits.

en: When enabled, dialogs will show a help button that gives access to the related help page.  Without this button, the help page can still be reached by pressing F1.
en_CA: When enabled, dialogues will show a help button that gives access to the related help page.  Without this button, the help page can still be reached by pressing F1.

en: Sets the size of the thumbnail shown in the Open dialog.
en_CA: Sets the size of the thumbnail shown in the Open dialogue.

en: The thumbnail in the Open dialog will be automatically updated if the file being previewed is smaller than the size set here.
en_CA: The thumbnail in the Open dialogue will be automatically updated if the file being previewed is smaller than the size set here.

en: Fatal parse error in brush file '%s': unable to decode abr format version %d.
en_CA: Fatal parse error in brush file '%s': unable to decode ABR format version %d.

en: The foreground color of the grid.
en_CA: The foreground colour of the grid.

en: The background color of the grid; only used in double dashed line style.
en_CA: The background colour of the grid; only used in double dashed line style.

en: Converting to indexed colors (stage 2)
en_CA: Converting to indexed colours (stage 2)

en: Converting to indexed colors (stage 3)
en_CA: Converting to indexed colours (stage 3)

en: Can't undo %s
en_CA: Cannot undo %s

en: Convert a mitered join to a bevelled join if the miter would extend to a distance of more than miter-limit * line-width from the actual join point.
en_CA: Convert a mitered join to a bevelled join if the miter would extend to a distance of more than (miter-limit * line-width) from the actual join point.

en: Indexed Color Conversion
en_CA: Indexed Colour Conversion

en: Convert Image to Indexed Colors
en_CA: Convert Image to Indexed Colours

en: _Maximum number of colors:
en_CA: _Maximum number of colours:

en: _Remove unused colors from colormap
en_CA: _Remove unused colours from colourmap

en: Color _dithering:
en_CA: Colour _dithering:

en: Converting to indexed colors
en_CA: Converting to indexed colours

en: Cannot convert to a palette with more than 256 colors.
en_CA: Cannot convert to a palette with more than 256 colours.

en: FG/BG Color
en_CA: FG/BG Colour

en: Saving remote files needs to determine the file format from the file extension. Please enter a file extension that matches the selected file format or enter no file extension at all.
en_CA: Remote file save needs to determine the file format from the file extension. Please enter a file extension that matches the selected file format or enter no file extension at all.

en: Saving canceled
en_CA: Saving cancelled

en: An image of the chosen size will use more memory than what is configured as "Maximum Image Size" in the Preferences dialog (currently %s).
en_CA: An image of the chosen size will use more memory than what is configured as "Maximum Image Size" in the Preferences dialogue (currently %s).

en: Color Profile
en_CA: Colour Profile

en: Scaling the image to the chosen size will make it use more memory than what is configured as "Maximum Image Size" in the Preferences dialog (currently %s).
en_CA: Scaling the image to the chosen size will make it use more memory than what is configured as "Maximum Image Size" in the Preferences dialogue (currently %s).

en: Scaling the image to the chosen size will shrink some layers completely away.
en_CA: Scaling the image to the chosen size will shrink away some layers completely.

en: Fill with _background color
en_CA: Fill with _background colour

en: N_umber of colors:
en_CA: N_umber of colours:

en: The selected source contains no colors.
en_CA: The selected source contains no colours.

en: Custom p_adding color:
en_CA: Custom p_adding colour:

en: Select Custom Canvas Padding Color
en_CA: Select Custom Canvas Padding Colour

en: Maximum _filesize for thumbnailing:
en_CA: Maximum _file size for thumbnailing:

en: Show _foreground & background color
en_CA: Show _foreground & background colour

note: Zoom & Resize Behavior
en: Zoom & Resize Behavior
en_CA: Zoom & Resize Behaviour

en: Color Management
en_CA: Colour Management

en: Select RGB Color Profile
en_CA: Select RGB Colour Profile

en: Select CMYK Color Profile
en_CA: Select CMYK Colour Profile

en: Select Monitor Color Profile
en_CA: Select Monitor Colour Profile

en: Select Printer Color Profile
en_CA: Select Printer Colour Profile

en: Indexed color layers are always scaled without interpolation. The chosen interpolation type will affect channels and layer masks only.
en_CA: Indexed colour layers are always scaled without interpolation. The chosen interpolation type will affect channels and layer masks only.

en: Color Display Filters
en_CA: Colour Display Filters

en: Configure Color Display Filters
en_CA: Configure Colour Display Filters

en: %s plug-In could not open image
en_CA: %s plug-in could not open image

en: Color management has been disabled. It can be enabled again in the Preferences dialog.
en_CA: Colour management has been disabled. It can be enabled again in the Preferences dialogue.

en: Procedure '%s' returned an invalid ID for argument '%s'. Most likely a plug-in is trying to work on a layer that doesn't exist any longer.
en_CA: Procedure '%s' returned an invalid ID for argument '%s'. Most likely a plug-in is trying to work on a layer that no longer exists.

en: Procedure '%s' has been called with an invalid ID for argument '%s'. Most likely a plug-in is trying to work on a layer that doesn't exist any longer.
en_CA: Procedure '%s' has been called with an invalid ID for argument '%s'. Most likely a plug-in is trying to work on a layer that no longer exists.

en: Procedure '%s' returned an invalid ID for argument '%s'. Most likely a plug-in is trying to work on an image that doesn't exist any longer.
en_CA: Procedure '%s' returned an invalid ID for argument '%s'. Most likely a plug-in is trying to work on an image that no longer exists.

en: Procedure '%s' has been called with an invalid ID for argument '%s'. Most likely a plug-in is trying to work on an image that doesn't exist any longer.
en_CA: Procedure '%s' has been called with an invalid ID for argument '%s'. Most likely a plug-in is trying to work on an image that no longer exists.

en: Align center of target
en_CA: Align centre of target

en: Distribute horizontal centers of targets
en_CA: Distribute horizontal centres of targets

en: Distribute vertical centers of targets
en_CA: Distribute vertical centres of targets

en: Blend Tool: Fill selected area with a color gradient
en_CA: Blend Tool: Fill selected area with a colour gradient

en: Maximum color difference
en_CA: Maximum colour difference

en: Fill similar colors
en_CA: Fill similar colours

en: Finding Similar Colors
en_CA: Finding Similar Colours

en: Bucket Fill Tool: Fill selected area with a color or pattern
en_CA: Bucket Fill Tool: Fill selected area with a colour or pattern

en: Select by Color
en_CA: Select by Colour

en: Select by Color Tool: Select regions with similar colors
en_CA: Select by Colour Tool: Select regions with similar colours

en: _By Color Select
en_CA: _By Colour Select

en: Color Balance
en_CA: Colour Balance

en: Color Balance Tool: Adjust color distribution
en_CA: Colour Balance Tool: Adjust colour distribution

en: Color _Balance...
en_CA: Colour _Balance...

en: Adjust Color Balance
en_CA: Adjust Colour Balance

en: Color Balance operates only on RGB color layers.
en_CA: Colour Balance operates only on RGB colour layers.

en: Adjust Color Levels
en_CA: Adjust Colour Levels

en: Colorize
en_CA: Colourize

en: Colorize Tool: Colorize the image
en_CA: Colourize Tool: Colourize the image

en: Colori_ze...
en_CA: Colouri_ze...

en: Colorize the Image
en_CA: Colourize the Image

en: Colorize operates only on RGB color layers.
en_CA: Colourize operates only on RGB colour layers.

en: Color Picker Tool: Set colors from image pixels
en_CA: Colour Picker Tool: Set colours from image pixels

en: C_olor Picker
en_CA: C_olour Picker

en: Click in any image to view its color
en_CA: Click in any image to view its colour

en: Click in any image to pick the foreground color
en_CA: Click in any image to pick the foreground colour

en: Click in any image to pick the background color
en_CA: Click in any image to pick the background colour

en: Click in any image to add the color to the palette
en_CA: Click in any image to add the colour to the palette

note: tool->display->shell
en: Color Picker Information
en_CA: Colour Picker Information

en: Curves Tool: Adjust color curves
en_CA: Curves Tool: Adjust colour curves

en: Adjust Color Curves
en_CA: Adjust Colour Curves

en: %s to pick a background color
en_CA: %s to pick a background colour

en: Preview color:
en_CA: Preview colour:

note: granularity
en: Color Sensitivity
en_CA: Colour Sensitivity

en: Fuzzy Select Tool: Select a contiguous region on the basis of color
en_CA: Fuzzy Select Tool: Select a contiguous region on the basis of colour

en: Hue-Saturation operates only on RGB color layers.
en_CA: Hue-Saturation operates only on RGB colour layers.

en: Adjust all colors
en_CA: Adjust all colours

en: Select Primary Color to Adjust
en_CA: Select Primary Colour to Adjust

en: Adjust Selected Color
en_CA: Adjust Selected Colour

en: R_eset Color
en_CA: R_eset Colour

en: Levels Tool: Adjust color levels
en_CA: Levels Tool: Adjust colour levels

en: Use color from gradient
en_CA: Use colour from gradient

en: %s to pick a color
en_CA: %s to pick a colour

en: Posterize Tool: Reduce to a limited set of colors
en_CA: Posterize Tool: Reduce to a limited set of colours

en: Posterize (Reduce Number of Colors)
en_CA: Posterize (Reduce Number of Colours)

en: Expand from center
en_CA: Expand from centre

en: Center _X:
en_CA: Centre _X:

en: Center _Y:
en_CA: Centre _Y:

en: Threshold Tool: Reduce image to two colors using a threshold
en_CA: Threshold Tool: Reduce image to two colours using a threshold

en: Add the current color to the color history
en_CA: Add the current colour to the colour history

en: Hexadecimal color notation as used in HTML and CSS.  This entry also accepts CSS color names.
en_CA: Hexadecimal colour notation as used in HTML and CSS.  This entry also accepts CSS colour names.

en: Color index:
en_CA: Colour index:

en: When enabled the dialog automatically follows the image you are working on.
en_CA: When enabled, the dialogue automatically follows the image you are working on.

en: Foreground color set to:
en_CA: Foreground colour set to:

en: Background color set to:
en_CA: Background colour set to:

en: Change grid foreground color
en_CA: Change grid foreground colour

en: _Foreground color:
en_CA: _Foreground colour:

en: Change grid background color
en_CA: Change grid background colour

en: Help browser doesn't start
en_CA: Help browser did not start

en: Color space:
en_CA: Colour space:

en: colors
en_CA: colours

en: ICC color profile (*.icc, *.icm)
en_CA: ICC colour profile (*.icc, *.icm)

en: _Miter limit:
en_CA: _Mitre limit:

en: Color _space:
en_CA: Colour _space:

en: Change Foreground Color
en_CA: Change Foreground Colour

en: Change Background Color
en_CA: Change Background Colour

en: The active image.
    Click to open the Image Dialog.
en_CA: The active image.
    Click to open the Image Dialogue.

en: Drag to an XDS enabled file-manager to save the image.
en_CA: Drag to an XDS-enabled filemanager to save the image.

en: The active brush.
    Click to open the Brush Dialog.
en_CA: The active brush.
    Click to open the Brush Dialogue.

en: The active pattern.
    Click to open the Pattern Dialog.
en_CA: The active pattern.
    Click to open the Pattern Dialogue.

en: The active gradient.
    Click to open the Gradient Dialog.
en_CA: The active gradient.
    Click to open the Gradient Dialogue.

en: Open the brush selection dialog
en_CA: Open the brush selection dialogue

en: Open the pattern selection dialog
en_CA: Open the pattern selection dialogue

en: Open the gradient selection dialog
en_CA: Open the gradient selection dialogue

en: Open the palette selection dialog
en_CA: Open the palette selection dialogue

en: Open the font selection dialog
en_CA: Open the font selection dialogue

en: This XCF file is corrupt!  I have loaded as much of it as I can, but it is incomplete.
en_CA: This XCF file is corrupt!  GIMP has loaded as much of it as it can, but it is incomplete.

en: This XCF file is corrupt!  I could not even salvage any partial image data from it.
en_CA: This XCF file is corrupt!  GIMP could not even salvage any partial image data from it.

en: XCF warning: version 0 of XCF file format
    did not save indexed colormaps correctly.
    Substituting grayscale map.
en_CA: XCF warning: version 0 of XCF file format
    did not save indexed colourmaps correctly.
    Substituting grayscale map.

en: Use a running GIMP only, never start a new one
en_CA: Use a running GIMP only; never start a new one

note: if execv and execvp return, there was an error
en: Couldn't start '%s': %s
en_CA: Could not start '%s': %s

en: %s plug-in can only handle bitmap (two color) indexed images
en_CA: %s plug-in can only handle bitmap (two colour) indexed images

en: %s plug-in  can only handle RGB or indexed images
en_CA: %s plug-in can only handle RGB or indexed images

en: %d procedure matches your query | %d procedures match your query
en_CA[0]: %d procedure matches your query
en_CA[1]: %d procedures matches your query

en: FG color fill
en_CA: FG colour fill

en: BG color fill
en_CA: BG colour fill

en: gradient|Linear
en_CA: Linear

en: Double dashed
en_CA: Double-dashed

en: RGB color
en_CA: RGB colour

en: Indexed color
en_CA: Indexed colour

en: interpolation|None
en_CA: None

en: interpolation|Linear
en_CA: Linear

en: Run with last used values
en_CA: Run with last-used values

en: Mode of operation for color management.
en_CA: Mode of operation for colour management.

en: The color profile of your (primary) monitor.
en_CA: The colour profile of your (primary) monitor.

en: When enabled, GIMP will try to use the display color profile from the windowing system.  The configured monitor profile is then only used as a fallback.
en_CA: When enabled, GIMP will try to use the display colour profile from the windowing system.  The configured monitor profile is then only used as a fallback.

en: The default RGB working space color profile.
en_CA: The default RGB working space colour profile.

en: The CMYK color profile used to convert between RGB and CMYK.
en_CA: The CMYK colour profile used to convert between RGB and CMYK.

en: The color profile used for simulating a printed version (softproof).
en_CA: The colour profile used for simulating a printed version (softproof).

en: Sets how colors are mapped for your display.
en_CA: Sets how colours are mapped for your display.

en: Sets how colors are converted from RGB working space to the print simulation device.
en_CA: Sets how colours are converted from RGB working space to the print simulation device.

en: No color management
en_CA: No colour management

en: Color managed display
en_CA: Colour managed display

en: Relative colorimetric
en_CA: Relative colourimetric

en: intent|Saturation
en_CA: Saturation

en: Absolute colorimetric
en_CA: Absolute colourimetric

note: please don't translate 'yes' and 'no'
en: expected 'yes' or 'no' for boolean token %s, got '%s'
en_CA: Expected 'yes' or 'no' for boolean token %s, but got '%s'

en: invalid UTF-8 string
en_CA: Invalid UTF-8 string

en: _Foreground Color
en_CA: _Foreground Colour

en: _Background Color
en_CA: _Background Colour

en: Select color profile from disk...
en_CA: Select colour profile from disk...

en: profile|None
en_CA: None

en: %d page selected | All %d pages selected
en_CA[0]: %d pages selecte
en_CA[1]: All %d pages selected

en: Click the eyedropper, then click a color anywhere on your screen to select that color.
en_CA: Click the eyedropper, then click a colour anywhere on your screen to select that colour.

en: C_enter
en_CA: C_entre

en: Color deficit simulation filter (Brettel-Vienot-Mollon algorithm)
en_CA: Colour deficit simulation filter (Brettel-Vienot-Mollon algorithm)

en: Color Deficient Vision
en_CA: Colour Deficient Vision

en: Color _deficiency type:
en_CA: Colour _deficiency type:

en: Gamma color display filter
en_CA: Gamma colour display filter

en: High Contrast color display filter
en_CA: High Contrast colour display filter

en: Color management display filter using ICC color profiles
en_CA: Colour management display filter using ICC colour profiles

en: This filter takes its configuration from the Color Management section in the Preferences dialog.
en_CA: This filter takes its configuration from the Colour Management section in the Preferences dialogue.

en: Color proof filter using ICC color profile
en_CA: Colour proof filter using ICC colour profile

en: Color Proof
en_CA: Colour Proof

en: Choose an ICC Color Profile
en_CA: Choose an ICC Colour Profile

en: CMYK color selector
en_CA: CMYK colour selector

en: The percentage of black to pull out of the colored inks.
en_CA: The percentage of black to pull out of the coloured inks.

en: CMYK color selector (using color profile)
en_CA: CMYK colour selector (using colour profile)

en: Painter-style triangle color selector
en_CA: Painter-style triangle colour selector

en: Watercolor style color selector
en_CA: Watercolour style colour selector

en: Watercolor
en_CA: Watercolour

en: The MIDI channel to read events from. Set to -1 for reading from all MIDI channels.
en_CA: The MIDI channel to read events from. Set to -1 to read from all MIDI channels.

en: Realtime preview
en_CA: Real-time preview

en: Co_lors
en_CA: Co_lours

note: #-#-#-#-#  70 (gimp plug-ins)  #-#-#-#-# Number of Colors frame
en: Number of Colors
en_CA: Number of Colours

en: Change the number of colors in the mapping
en_CA: Change the number of colours in the mapping

note: Color Density frame
en: Color Density
en_CA: Colour Density

note: Color Function frame
en: Color Function
en_CA: Colour Function

en: Use sine-function for this color component
en_CA: Use sine-function for this colour component

en: Use cosine-function for this color component
en_CA: Use cosine-function for this colour component

en: Use linear mapping instead of any trigonometrical function for this color channel
en_CA: Use linear mapping instead of any trigonometrical function for this colour channel

en: If you enable this option higher color values will be swapped with lower ones and vice versa
en_CA: If you enable this option higher colour values will be swapped with lower ones and vice versa

note: #-#-#-#-#  70 (gimp plug-ins)  #-#-#-#-# Colormode toggle box
en: Color Mode
en_CA: Colour Mode

en: Create a color-map with the options you specified above (color density/function). The result is visible in the preview image
en_CA: Create a colour-map with the options you specified above (colour density/function). The result is visible in the preview image

en: Create a color-map using a gradient from the gradient editor
en_CA: Create a colour-map using a gradient from the gradient editor

en: Select lightsource color
en_CA: Select lightsource colour

en: Set light source color
en_CA: Set light source colour

en: Amount of original color to show where no direct light falls
en_CA: Amount of original colour to show where no direct light falls

en: Intensity of original color when lit by a light source
en_CA: Intensity of original colour when lit by a light source

en: Lightsource color:
en_CA: Lightsource colour:

en: Bad colormap
en_CA: Bad colourmap

en: Alter colors in various psychedelic ways
en_CA: Alter colours in various psychedelic ways

en: _RGB color model
en_CA: _RGB colour model

en: _HSL color model
en_CA: _HSL colour model

en: Detach the animation from the dialog window
en_CA: Detach the animation from the dialogue window

en: _Set surroundings to background color
en_CA: _Set surroundings to background colour

en: Set foreground to the average color of the image border
en_CA: Set foreground to the average colour of the image border

en: Cannot operate on indexed color images.
en_CA: Cannot operate on indexed colour images.

en: Analyze the set of colors in the image
en_CA: Analyse the set of colours in the image

en: Colorcube A_nalysis...
en_CA: Colourcube A_nalysis...

en: Colorcube Analysis
en_CA: Colourcube Analysis

en: No colors
en_CA: No colours

en: Only one unique color
en_CA: Only one unique colour

en: Number of unique colors: %d
en_CA: Number of unique colours: %d

en: Alter colors by mixing RGB Channels
en_CA: Alter colours by mixing RGB Channels

en: Stretch color saturation to cover maximum possible range
en_CA: Stretch colour saturation to cover maximum possible range

en: _Color Enhance
en_CA: _Colour Enhance

en: Color Enhance
en_CA: Colour Enhance

en: Replace all colors with shades of a specified color
en_CA: Replace all colours with shades of a specified colour

en: Colorif_y...
en_CA: Colourif_y...

en: Colorifying
en_CA: Colourifying

en: Colorify
en_CA: Colourify

en: Custom color:
en_CA: Custom colour:

en: Colorify Custom Color
en_CA: Colourify Custom Colour

en: Rearrange the colormap
en_CA: Rearrange the colourmap

en: R_earrange Colormap...
en_CA: R_earrange Colourmap...

en: Swap two colors in the colormap
en_CA: Swap two colours in the colourmap

en: _Swap Colors
en_CA: _Swap Colours

en: Rearranging the colormap
en_CA: Rearranging the colourmap

en: Rearrange Colormap
en_CA: Rearrange Colourmap

en: Drag and drop colors to rearrange the colormap.  The numbers shown are the original indices.  Right-click for a menu with sort options.
en_CA: Drag and drop colours to rearrange the colourmap.  The numbers shown are the original indices.  Right-click for a menu with sort options.

en: Convert a specified color to transparency
en_CA: Convert a specified colour to transparency

en: Color to _Alpha...
en_CA: Colour to _Alpha...

en: Removing color
en_CA: Removing colour

en: Color to Alpha
en_CA: Colour to Alpha

en: Color to Alpha Color Picker
en_CA: Colour to Alpha Colour Picker

en: Create an image using multiple gray images as color channels
en_CA: Create an image using multiple gray images as colour channels

en: Unable to recompose, source layer not found
en_CA: Unable to recompose: source layer not found

en: Color _model:
en_CA: Colour _model:

en: No sensible file extension, saving as compressed XCF.
en_CA: No sensible file extension; saving as compressed XCF.

en: No sensible file extension, attempting to load with file magic.
en_CA: No sensible file extension; attempting to load with file magic.

en: N_ormalise
en_CA: N_ormalize

en: _Use background color
en_CA: _Use background colour

en: Decompose an image into separate colorspace components
en_CA: Decompose an image into separate colourspace components

en: _Foreground as registration color
en_CA: _Foreground as registration colour

en: Pixels in the foreground color will appear black in all output images.  This can be used for things like crop marks that have to show up on all channels.
en_CA: Pixels in the foreground colour will appear black in all output images.  This can be used for things like crop marks that have to show up on all channels.

en: Swap one color with another
en_CA: Swap one colour with another

en: _Color Exchange...
en_CA: _Colour Exchange...

en: Color Exchange
en_CA: Colour Exchange

en: Middle-Click Inside Preview to Pick "From Color"
en_CA: Middle-Click Inside Preview to Pick "From Colour"

en: To Color
en_CA: To Colour

en: From Color
en_CA: From Colour

en: Color Exchange: To Color
en_CA: Colour Exchange: To Colour

en: Color Exchange: From Color
en_CA: Colour Exchange: From Colour

note: Film color
en: Select Film Color
en_CA: Select Film Colour

note: Numbering color
en: Select Number Color
en_CA: Select Number Colour

en: Center of Flare Effect
en_CA: Centre of Flare Effect

en: Interactively modify the image colors
en_CA: Interactively modify the image colours

en: Couldn't simply reduce colors further. Saving as opaque.
en_CA: Couldn't simply reduce colours further. Saving as opaque.

en: Cannot save RGB color images. Convert to indexed color or grayscale first.
en_CA: Cannot save RGB colour images. Convert to indexed colour or grayscale first.

en: Recolor the image using colors from the active gradient
en_CA: Recolour the image using colours from the active gradient

en: Recolor the image using colors from the active palette
en_CA: Recolour the image using colours from the active palette

note: attach color selectors
en: Horizontal Color
en_CA: Horizontal Colour

en: Vertical Color
en_CA: Vertical Colour

en: Intersection Color
en_CA: Intersection Colour

en: If checked GTM will replace any rectangular sections of identically colored blocks with one large cell with ROWSPAN and COLSPAN values.
en_CA: If checked GTM will replace any rectangular sections of identically coloured blocks with one large cell with ROWSPAN and COLSPAN values.

en: Set a color profile on the image
en_CA: Set a colour profile on the image

en: _Assign Color Profile...
en_CA: _Assign Colour Profile...

en: Apply a color profile on the image
en_CA: Apply a colour profile to the image

en: _Convert to Color Profile...
en_CA: _Convert to Colour Profile...

en: Image Color Profile Information
en_CA: Image Colour Profile Information

en: Color Profile Information
en_CA: Colour Profile Information

en: Color profile '%s' is not for RGB color space.
en_CA: Colour profile '%s' is not for RGB colour space.

en: '%s' does not appear to be an ICC color profile
en_CA: '%s' does not appear to be an ICC colour profile

en: The image '%s' has an embedded color profile:
en_CA: The image '%s' has an embedded colour profile:

en: Convert to ICC Color Profile
en_CA: Convert to ICC Colour Profile

en: Assign ICC Color Profile
en_CA: Assign ICC Colour Profile

en: Current Color Profile
en_CA: Current Colour Profile

en: Destination profile is not for RGB color space.
en_CA: Destination profile is not for RGB colour space.

en: First Source Color
en_CA: First Source Colour

en: Second Source Color
en_CA: Second Source Colour

en: First Destination Color
en_CA: First Destination Colour

en: Second Destination Color
en_CA: Second Destination Colour

en: Map colors sending foreground to black, background to white
en_CA: Map colours sending foreground to black, background to white

en: Map color range specified by two colors to another range
en_CA: Map colour range specified by two colours to another range

en: Color Range _Mapping...
en_CA: Colour Range _Mapping...

en: Cannot operate on gray or indexed color images.
en_CA: Cannot operate on gray or indexed colour images.

en: Adjusting foreground and background colors
en_CA: Adjusting foreground and background colours

en: Mapping colors
en_CA: Mapping colours

en: Map Color Range
en_CA: Map Colour Range

en: Source Color Range
en_CA: Source Colour Range

en: Destination Color Range
en_CA: Destination Colour Range

en: Blur Center
en_CA: Blur Centre

en: Save background color
en_CA: Save background colour

en: Color _variation:
en_CA: Colour _variation:

en: Co_lor averaging
en_CA: Co_lour averaging

en: Distort colors by random amounts
en_CA: Distort colours by random amounts

en: Supernova Color Picker
en_CA: Supernova Colour Picker

en: Center of Nova
en_CA: Centre of Nova

en: Smear colors to simulate an oil painting
en_CA: Smear colours to simulate an oil painting

en: C_entering
en_CA: C_entring

en: Fo_reground color
en_CA: Fo_reground colour

en: Bac_kground color
en_CA: Bac_kground colour

en: Simulate color distortion produced by a copy machine
en_CA: Simulate colour distortion produced by a copy machine

en: Simplify image into an array of solid-colored squares
en_CA: Simplify image into an array of solid-coloured squares

note: Aie! Unknown type
en: Unknown color model in PNG file '%s'.
en_CA: Unknown colour model in PNG file '%s'.

en: Save _background color
en_CA: Save _background colour

en: Save color _values from transparent pixels
en_CA: Save colour _values from transparent pixels

en: Premature end of file.
en_CA: Premature end-of-file.

en: _Millimeter
en_CA: _Millimetre

en: Cannot handle PSD files in CMYK color
en_CA: Cannot handle PSD files in CMYK colour

en: Cannot handle PSD files in Multichannel color
en_CA: Cannot handle PSD files in Multichannel colour

en: Cannot handle PSD files in Duotone color
en_CA: Cannot handle PSD files in Duotone colour

en: Cannot handle PSD files in Lab color
en_CA: Cannot handle PSD files in Lab colour

en: Cannot handle the color mode %d of the PSD file
en_CA: Cannot handle the colour mode %d of the PSD file

en: Cannot handle PSD files in CMYK color with more than 5 channels
en_CA: Cannot handle PSD files in CMYK colour with more than 5 channels

en: Unable to save layer with mode '%s'.  Either the PSD file format or the save plug-in does not support that, using normal mode instead.
en_CA: Unable to save layer with mode '%s'.  Either the PSD file format or the save plug-in does not support that. Using normal mode instead.

en: Unable to save '%s'.  The psd file format does not support images that are more than 30000 pixels wide or tall.
en_CA: Unable to save '%s'.  The PSD file format does not support images that are more than 30000 pixels wide or tall.

en: Unable to save '%s'.  The psd file format does not support images with layers that are more than 30000 pixels wide or tall.
en_CA: Unable to save '%s'.  The PSD file format does not support images with layers that are more than 30000 pixels wide or tall.

en: Randomly interchange some pixels with neighbors
en_CA: Randomly interchange some pixels with neighbours

en: Remove the red eye effect caused by camera flashes
en_CA: Remove the red-eye effect caused by camera flashes

en: _Red Eye Removal...
en_CA: _Red-Eye Removal...

en: Threshold for the red eye color to remove.
en_CA: Threshold for the red-eye colour to remove.

en: Removing red eye
en_CA: Removing red-eye

en: Colorize image using a sample image as a guide
en_CA: Colourize image using a sample image as a guide

en: _Sample Colorize...
en_CA: _Sample Colourize...

en: Sample Colorize
en_CA: Sample Colourize

en: Get _Sample Colors
en_CA: Get _Sample Colours

note: check button
en: Show color
en_CA: Show colour

note: check button
en: Use subcolors
en_CA: Use subcolours

en: Sample analyze
en_CA: Sample analyse

en: Remap colorized
en_CA: Remap colourized

en: Blur neighboring pixels, but only in low-contrast areas
en_CA: Blur neighbouring pixels, but only in low-contrast areas

en: Replace partial transparency with the current background color
en_CA: Replace partial transparency with the current background colour

note: if in grey scale, the colors are necessarily black and white
en: The colors are white and black.
en_CA: The colours are white and black.

en: First color
en_CA: First colour

en: Second color
en_CA: Second colour

en: F_irst color:
en_CA: F_irst colour:

en: S_econd color:
en_CA: S_econd colour:

en: Derive a smooth color palette from the image
en_CA: Derive a smooth colour palette from the image

en: _Natural color
en_CA: _Natural colour

en: _Foreground color
en_CA: _Foreground colour

en: _Background color
en_CA: _Background colour

en: Use the color of the image
en_CA: Use the colour of the image

en: Use the foreground color
en_CA: Use the foreground colour

en: Use the background color
en_CA: Use the background colour

en: Color Selection Dialog
en_CA: Colour Selection Dialogue

en: Could not read color entries from '%s'
en_CA: Could not read colour entries from '%s'

en: Type of colormap not supported
en_CA: Type of colourmap not supported

en: Coloring transparency
en_CA: Colouring transparency

en: Save _color values from transparent pixels
en_CA: Save _colour values from transparent pixels

en: The unit's abbreviation (e.g. "cm" for centimeters).
en_CA: The unit's abbreviation (e.g. "cm" for centimetres).

en: Propagate certain colors to neighboring pixels
en_CA: Propagate certain colours to neighbouring pixels

en: Web browser not specified.
    Please specify a web browser using the Preferences Dialog.
en_CA: Web browser not specified.
    Please specify a web browser using the Preferences Dialogue.

note: The image is not black-and-white.
en: The image which you are trying to save as an XBM contains more than two colors.
    
    Please convert it to a black and white (1-bit) indexed image and try again.
en_CA: The image which you are trying to save as an XBM contains more than two colours.
    
    Please convert it to a black and white (1-bit) indexed image and try again.

en: Can't read color entries
en_CA: Cannot read colour entries

en: Color_map:
en_CA: Colour_map:

en: Color fill
en_CA: Colour fill

note: "snap to grid" checkbutton at bottom of style frame
en: checkbutton|Snap to grid
en_CA: Snap to grid

en: Grid color:
en_CA: Grid colour:

en: Error trying to save figure as a parasite: can't attach parasite to drawable.
en_CA: Error trying to save figure as a parasite: cannot attach parasite to drawable.

en: Co_lor
en_CA: Co_lour

en: C_enter of brush
en_CA: C_entre of brush

en: Color is computed from the average of all pixels under the brush
en_CA: Colour is computed from the average of all pixels under the brush

en: Samples the color from the pixel in the center of the brush
en_CA: Samples the colour from the pixel in the centre of the brush

en: Color _noise:
en_CA: Colour _noise:

en: Adds random noise to the color
en_CA: Adds random noise to the colour

en: Solid colored background
en_CA: Solid coloured background

en: The distance from the center of the image determines the direction of the stroke
en_CA: The distance from the centre of the image determines the direction of the stroke

en: Let the direction from the center determine the direction of the stroke
en_CA: Let the direction from the centre determine the direction of the stroke

en: Focus the brush strokes around the center of the image
en_CA: Focus the brush strokes around the centre of the image

en: The distance from the center of the image determines the size of the stroke
en_CA: The distance from the centre of the image determines the size of the stroke

en: Let the direction from the center determine the size of the stroke
en_CA: Let the direction from the centre determine the size of the stroke

en: The GIMP help files are not found.
en_CA: The GIMP help files were not found.

en: Color Transformation
en_CA: Colour Transformation

en: Re_center
en_CA: Re_centre

en: Recompute Center
en_CA: Recompute Centre

en: Released under the GNU General Public License
en_CA: Released under the GNU General Public Licence

en: Center _x:
en_CA: Centre _x:

en: Center _y:
en_CA: Centre _y:

en: Guides are pre-defined rectangles covering the image. You define them by their width, height, and spacing from each other. This allows you to rapidly create the most common image map type - image collection of "thumbnails", suitable for navigation bars.
en_CA: Guides are pre-defined rectangles covering the image. You define them by their width, height, and spacing from each other. This allows you rapidly to create the most common image map type - image collection of "thumbnails", suitable for navigation bars.

en: Foreground / background colors
en_CA: Foreground / background colours

en: Replace a range of colors with another
en_CA: Replace a range of colours with another

en: _Rotate Colors...
en_CA: _Rotate Colours...

en: Rotating the colors
en_CA: Rotating the colours

en: Rotate Colors
en_CA: Rotate Colours

en: An error occured running %s
en_CA: An error occurred running %s

en: Python-Fu Color Selection
en_CA: Python-Fu Colour Selection

en: Saving as colored XHTML
en_CA: Saving as coloured XHTML

en: Save as colored XHTML
en_CA: Save as coloured XHTML

en: Colored XHTML
en_CA: Coloured XHTML

en: _Fog color
en_CA: _Fog colour

en: Offset the colors in a palette
en_CA: Offset the colours in a palette

en: Sort the colors in a palette
en_CA: Sort the colours in a palette

en: Color _model
en_CA: Colour _model

en: Create a repeating gradient using colors from the palette
en_CA: Create a repeating gradient using colours from the palette

en: Create a gradient using colors from the palette
en_CA: Create a gradient using colours from the palette

en: Script-Fu Color Selection
en_CA: Script-Fu Colour Selection

en: _Beveled Pattern
en_CA: _Bevelled Pattern

en: You can not use "Refresh Scripts" while a Script-Fu dialog box is open.  Please close all Script-Fu windows and try again.
en_CA: You cannot use "Refresh Scripts" while a Script-Fu dialogue box is open.  Please close all Script-Fu windows and try again.

en: Add a beveled border to an image
en_CA: Add a bevelled border to an image

en: Delta value on color
en_CA: Delta value on colour

en: Glow color
en_CA: Glow colour

en: Create a simple, beveled button graphic for webpages
en_CA: Create a simple, bevelled button graphic for webpages

en: Lower-right color
en_CA: Lower-right colour

en: Simple _Beveled Button...
en_CA: Simple _Bevelled Button...

en: Upper-left color
en_CA: Upper-left colour

en: Create a beveled pattern arrow for webpages
en_CA: Create a bevelled pattern arrow for webpages

en: Create a beveled pattern bullet for webpages
en_CA: Create a bevelled pattern bullet for webpages

en: Create a beveled pattern button for webpages
en_CA: Create a bevelled pattern button for webpages

en: Create a beveled pattern heading for webpages
en_CA: Create a bevelled pattern heading for webpages

en: Create a beveled pattern hrule for webpages
en_CA: Create a bevelled pattern hrule for webpages

en: Color 1
en_CA: Colour 1

en: Color 2
en_CA: Colour 2

en: Color 3
en_CA: Colour 3

en: Chalk color
en_CA: Chalk colour

en: Add realistic looking coffee stains to the image
en_CA: Add realistic-looking coffee stains to the image

en: Outline color
en_CA: Outline colour

en: Active colors
en_CA: Active colours

en: _Color scheme
en_CA: _Colour scheme

en: Dark color
en_CA: Dark colour

en: Highlight color
en_CA: Highlight colour

en: Number of colors
en_CA: Number of colours

en: Select-by-color threshold
en_CA: Select-by-colour threshold

en: Shadow color
en_CA: Shadow colour

en: Create an image of a second level Tube Button Label using the gimp.org webpage theme
en_CA: Create an image of a second-level Tube Button Label using the gimp.org webpage theme

en: Create an image of a third level Tube Button Label using the gimp.org webpage theme
en_CA: Create an image of a third-level Tube Button Label using the gimp.org webpage theme

en: Create a logo with a shiny look and beveled edges
en_CA: Create a logo with a shiny look and bevelled edges

en: Create a logo in a two-color, scribbled text style
en_CA: Create a logo in a two-colour, scribbled text style

en: Frame color
en_CA: Frame colour

en: Fill a layer with rays emanating outward from its center using the FG color
en_CA: Fill a layer with rays emanating outward from its centre using the FG colour

en: Lower color
en_CA: Lower colour

en: Lower color (active)
en_CA: Lower colour (active)

en: Text color (active)
en_CA: Text colour (active)

en: Upper color
en_CA: Upper colour

en: Upper color (active)
en_CA: Upper colour (active)

en: Edge behavior
en_CA: Edge behaviour

en: Change the colormap of an image to the colors in a specified palette.
en_CA: Change the colourmap of an image to the colours in a specified palette.

en: Se_t Colormap...
en_CA: Se_t Colourmap...

en: Font color
en_CA: Font colour

en: Sphere color
en_CA: Sphere colour

en: Index to n colors (0 = remain RGB)
en_CA: Index to n colours (0 = remain RGB)

en: Color method
en_CA: Colour method

en: Burst color
en_CA: Burst colour

en: How to Use _Dialogs
en_CA: How to Use _Dialogues

en: Drop shadow color
en_CA: Drop shadow colour

en: <tt>Ctrl</tt>-click with the Bucket Fill tool to have it use the background color instead of the foreground color. Similarly, <tt>Ctrl</tt>-clicking with the eyedropper tool sets the background color instead of the foreground color.
en_CA: <tt>Ctrl</tt>-click with the Bucket Fill tool to have it use the background colour instead of the foreground colour. Similarly, <tt>Ctrl</tt>-clicking with the eyedropper tool sets the background colour instead of the foreground colour.

en: <tt>Ctrl</tt>-clicking on the layer mask's preview in the Layers dialog toggles the effect of the layer mask. <tt>Alt</tt>-clicking on the layer mask's preview in the Layers dialog toggles viewing the mask directly.
en_CA: <tt>Ctrl</tt>-clicking on the layer mask's preview in the Layers dialogue toggles the effect of the layer mask. <tt>Alt</tt>-clicking on the layer mask's preview in the Layers dialogue toggles viewing the mask directly.

en: <tt>Shift</tt>-click on the eye icon in the Layers dialog to hide all layers but that one. <tt>Shift</tt>-click again to show all layers.
en_CA: <tt>Shift</tt>-click on the eye icon in the Layers dialogue to hide all layers but that one. <tt>Shift</tt>-click again to show all layers.

en: A floating selection must be anchored to a new layer or to the last active layer before doing other operations on the image. Click on the &quot;New Layer&quot; or the &quot;Anchor Layer&quot; button in the Layers dialog, or use the menus to do the same.
en_CA: A floating selection must be anchored to a new layer or to the last active layer before doing other operations on the image. Click on the &quot;New Layer&quot; or the &quot;Anchor Layer&quot; button in the Layers dialogue, or use the menus to do the same.

en: After you enabled &quot;Dynamic Keyboard Shortcuts&quot; in the Preferences dialog, you can reassign shortcut keys. Do so by bringing up the menu, selecting a menu item, and pressing the desired key combination. If &quot;Save Keyboard Shortcuts&quot; is enabled, the key bindings are saved when you exit GIMP. You should probably disable &quot;Dynamic Keyboard Shortcuts&quot; afterwards, to prevent accidentally assigning/reassigning shortcuts.
en_CA: After you enabled &quot;Dynamic Keyboard Shortcuts&quot; in the Preferences dialogue, you can reassign shortcut keys. Do so by bringing up the menu, selecting a menu item, and pressing the desired key combination. If &quot;Save Keyboard Shortcuts&quot; is enabled, the key bindings are saved when you exit GIMP. You should probably disable &quot;Dynamic Keyboard Shortcuts&quot; afterwards, to prevent accidentally assigning/reassigning shortcuts.

en: GIMP supports gzip compression on the fly. Just add <tt>.gz</tt> (or <tt>.bz2</tt>, if you have bzip2 installed) to the filename and your image will be saved compressed. Of course loading compressed images works too.
en_CA: GIMP supports gzip compression on the fly. Just add <tt>.gz</tt> (or <tt>.bz2</tt>, if you have bzip2 installed) to the filename and your image will be saved compressed. Of course, loading compressed images works too.

en: If a layer's name in the Layers dialog is displayed in <b>bold</b>, this layer doesn't have an alpha-channel. You can add an alpha-channel using Layer→Transparency→Add Alpha Channel.
en_CA: If a layer's name in the Layers dialogue is displayed in <b>bold</b>, this layer doesn't have an alpha-channel. You can add an alpha-channel using Layer→Transparency→Add Alpha Channel.

en: If some of your scanned photos do not look colorful enough, you can easily improve their tonal range with the &quot;Auto&quot; button in the Levels tool (Colors→Levels). If there are any color casts, you can correct them with the Curves tool (Colors→Curves).
en_CA: If some of your scanned photos do not look colourful enough, you can easily improve their tonal range with the &quot;Auto&quot; button in the Levels tool (Colours→Levels). If there are any colour casts, you can correct them with the Curves tool (Colours→Curves).

en: If your screen is too cluttered, you can press <tt>Tab</tt> in an image window to toggle the visibility of the toolbox and other dialogs.
en_CA: If your screen is too cluttered, you can press <tt>Tab</tt> in an image window to toggle the visibility of the toolbox and other dialogues.

en: You can create and edit complex selections using the Path tool. The Paths dialog allows you to work on multiple paths and to convert them to selections.
en_CA: You can create and edit complex selections using the Path tool. The Paths dialogue allows you to work on multiple paths and to convert them to selections.

en: You can drag a layer from the Layers dialog and drop it onto the toolbox. This will create a new image containing only that layer.
en_CA: You can drag a layer from the Layers dialogue and drop it onto the toolbox. This will create a new image containing only that layer.

en: You can drag and drop many things in GIMP. For example, dragging a color from the toolbox or from a color palette and dropping it into an image will fill the current selection with that color.
en_CA: You can drag and drop many things in GIMP. For example, dragging a colour from the toolbox or from a colour palette and dropping it into an image will fill the current selection with that colour.

en: You can perform many layer operations by right-clicking on the text label of a layer in the Layers dialog.
en_CA: You can perform many layer operations by right-clicking on the text label of a layer in the Layers dialogue.

en: You can save a selection to a channel (Select→Save to Channel) and then modify this channel with any paint tools. Using the buttons in the Channels dialog, you can toggle the visibility of this new channel or convert it to a selection.
en_CA: You can save a selection to a channel (Select→Save to Channel) and then modify this channel with any paint tools. Using the buttons in the Channels dialogue, you can toggle the visibility of this new channel or convert it to a selection.

en: Do you want to create a videoindex file ?
    This will enable fast and random frame access.
    
    If you want GIMP-GAP to create videoindex files
    automatically whithout showing up this dialog again
    then you should add the following line to
    your gimprc file:
    %s
en_CA: Do you want to create a videoindex file ?
    This will enable fast and random frame access.
    
    If you want GIMP-GAP to create videoindex files
    automatically whithout showing up this dialogue again
    then you should add the following line to
    your gimprc file:
    %s

en: Create Videoindex file
en_CA: Create Video Index file

note: the frame
en: Select By Color
en_CA: Select By Colour

note: the keycolor label keycolor label
en: Keycolor:
en_CA: Keycolour:

note: the keycolor button
en: Bluebox Color Picker
en_CA: Bluebox Colour Picker

note: lower/upper step, page digits constrain lower/upper unconstrained
en: Sharp pixel selection by color with 0.0. Greater values than 0 makes selection with more or less variable alpha value depending on difference to the keycolor
en_CA: Sharp pixel selection by colour with 0.0. Values greater than 0 make selection with more or less variable alpha value depending on difference to the keycolour

en: Apply thresholds in the RGB colormodel
en_CA: Apply thresholds in the RGB colourmodel

en: Apply thresholds in the HSV colormodel
en_CA: Apply thresholds in the HSV colourmodel

note: lower/upper step, page digits constrain lowr/upper unconstrained
en: Common color threshold
en_CA: Common colour threshold

en: Number of audiotrack to extract. (0 == ignore audio)
en_CA: Number of audio track to extract. (0 == ignore audio)

en: Filename for the extracted audiodata. Audiodata is written in RIFF WAV fileformat (but only if audiotrack >= 1)
en_CA: Filename for the extracted audio data. Audio data is written in RIFF WAV file format (but only if audio track >= 1)

en: Image fileformat for the extracted video frames. (xcf is extracted as png and converted to xcf)
en_CA: Image file format for the extracted video frames. (XCF is extracted as PNG and converted to XCF)

en: Png Compression:
en_CA: PNG Compression:

en: Compression for resulting png frames where 0 is uncopressed (fast), 9 is max. compression (this option is ignored when JPEG format is used)
en_CA: Compression for resulting PNG frames where 0 is uncompressed (fast), 9 is max. compression (this option is ignored when JPEG format is used)

en: Quality for resulting jpeg frames where 100 is best quality(is ignored when other formats are used)
en_CA: Quality for resulting JPEG frames where 100 is best quality (is ignored when other formats are used)

en: Jpeg Optimize:
en_CA: JPEG Optimize:

en: optimization factor(is ignored when other formats are used)
en_CA: optimization factor (is ignored when other formats are used)

en: Jpeg Smooth:
en_CA: JPEG Smooth:

en: Smooth factor(is ignored when other formats are used)
en_CA: Smooth factor (is ignored when other formats are used)

en: Jpeg Progressive:
en_CA: JPEG Progressive:

en: Enable progressive jpeg encoding(is ignored when other formats are used)
en_CA: Enable progressive JPEG encoding (is ignored when other formats are used)

en: Jpeg Baseline:
en_CA: JPEG Baseline:

en: Enable baseline jpeg encoding(is ignored when other formats are used)
en_CA: Enable baseline JPEG encoding (is ignored when other formats are used)

en: 
    Warning: xanim 2.80 is old unmaintained software
    and has only limited MPEG support.
    Most of the frames (type P and B) will be skipped.
en_CA: 
    Warning: xanim 2.80 is old unmaintained software
    and has only limited MPEG support.
    Most of the frames (types P and B) will be skipped.

en: Operation cancelled.
    Current frame was changed while dialog was open.
en_CA: Operation cancelled.
    Current frame was changed while dialogue was open.

en: Click: show warp pick koordinates in the source window
en_CA: Click: show warp pick coordinates in the source window

en: Morphpoint X koordinate
en_CA: Morphpoint X co-ordinate

en: Morphpoint Y koordinate
en_CA: Morphpoint Y co-ordinate

en: ON: Descending deform action from workpoint (full) to radius (zero). Descend by power of intensity.OFF: Linear deform action inside the radius
en_CA: ON: Descending deform action from workpoint (full) to radius (zero). Descend by power of intensity. OFF: Linear deform action inside the radius

en: ON: Use quality workpoint selection algorithm.OFF: Use fast workpoint selection algorithm.
en_CA: ON: Use quality workpoint selection algorithm. OFF: Use fast workpoint selection algorithm.

note: the pointcolor colorbutton
en: Pointcolor
en_CA: Pointcolour

en: Set color for the morph workpoints
en_CA: Set colour for the morph workpoints

note: the currentcolor colorbutton
en: Current Pointcolor
en_CA: Current Pointcolour

en: Set color for the current morph workpoint
en_CA: Set colour for the current morph workpoint

en: Apply the bluebox filter on the moving object(s). The bluebox filter makes the keycolor transparent.
en_CA: Apply the bluebox filter on the moving object(s). The bluebox filter makes the keycolour transparent.

note: keycolor button
en: Move Path Bluebox Keycolor
en_CA: Move Path Bluebox Keycolour

en: Open dialog window to set parameters and keycolor for the bluebox filter
en_CA: Open dialogue window to set parameters and keycolour for the bluebox filter

en: Delete all controlpoints, and replace them with a copy of all anchorpoints of the current path from the image where 'MovePath' was invoked from.Hold Shift key to create contolpoints foreach handled frame, following the bezier path
en_CA: Delete all controlpoints, and replace them with a copy of all anchorpoints of the current path from the image where 'MovePath' was invoked from. Hold Shift key to create contolpoints foreach handled frame, following the bezier path

en: Show previous controlpoint. Hold down the shift key to follow keyframes.
en_CA: Show previous control point. Hold down the shift key to follow keyframes.

en: Show next controlpoint. Hold down the shift key to follow keyframes.
en_CA: Show next control point. Hold down the shift key to follow keyframes.

en: Show first controlpoint. Hold down the shift key to follow keyframes.
en_CA: Show first control point. Hold down the shift key to follow keyframes.

en: Show last controlpoint. Hold down the shift key to follow keyframes.
en_CA: Show last control point. Hold down the shift key to follow keyframes.

en: Reset the current controlpoint to default values
en_CA: Reset the current control point to default values

en: Reset all controlpoints to default values but dont change the path (X/Y values). Hold down the shift key to copy settings of point1 into all other points. Holding down the ctrl key spreads a mix of the settings of point1 and the last point into the other points inbetween.
en_CA: Reset all controlpoints to default values but don't change the path (X/Y values). Hold down the shift key to copy settings of point1 into all other points. Holding down the ctrl key spreads a mix of the settings of point1 and the last point into the other points in between.

note: startup with RED pathline color
en: Pathline Color Picker
en_CA: Pathline Colour Picker

en: Select the color that is used to draw pathlines in the preview
en_CA: Select the colour that is used to draw pathlines in the preview

en: For the thumbnail update you have to select
    a thumbnail filesize other than 'No Thumbnails'
    in the environment section of the preferences dialog
en_CA: For the thumbnail update you have to select
    a thumbnail filesize other than 'No Thumbnails'
    in the environment section of the preferences dialogue

en: Bidiriectional (single) +1,-2,+3,-4,+5,-6
en_CA: Bidirectional (single) +1,-2,+3,-4,+5,-6

en: Bidiriectional (double) +1,-1,+2,-2,+3,-3
en_CA: Bidirectional (double) +1,-1,+2,-2,+3,-3

en: Click: Set current framenr as selection range start 'From Frame',
    SHIFT-Click: load this frame into the calling image
en_CA: Click: Set current framenr as selction range start 'From Frame',
    SHIFT-Click: load this frame into the calling image

note: the Cancel Videoindex Creation button (only visible while creating vindex)
en: Cancel Videoindex creation
en_CA: Cancel Video index creation

en: Cancel videoindex creation. Videoindex creation requires full scann of the video but allows fast random access to frames afterwards. Without a videoindex, access is done by very slow sequential read
en_CA: Cancel video index creation. Video index creation requires a full scan of the video but allows fast random access to frames afterwards. Without a video index, access is done by a very slow sequential read

en: Floyd-Steinberg Color Dithering (Normal)
en_CA: Floyd-Steinberg Colour Dithering (Normal)

en: Floyd-Steinberg Color Dithering (Reduced Color Bleeding)
en_CA: Floyd-Steinberg Colour Dithering (Reduced Colour Bleeding)

en: Positioned Color Dithering
en_CA: Positioned Colour Dithering

en: No Color Dithering
en_CA: No Colour Dithering

en: Remove unused or double colors (ignored if palette type is not custom)
en_CA: Remove unused or double colours (ignored if palette type is not custom)

en: Number of resulting colors (ignored if palette type is not generate optimal palette)
en_CA: Number of resulting colours (ignored if palette type is not generate optimal palette)

en: Resulting layer size is the frame size transparent parts are filled with background color
en_CA: Resulting layer size is the frame size transparent parts are filled with background colour

note: the center offsetX button
en: Center Horizontal
en_CA: Centre Horizontal

note: the center offsetY button
en: Center Vertical
en_CA: Centre Vertical

en: ON: Remove alpha channel in resulting frames. Transparent parts are filled with the background color.
    OFF: Layers in the resulting frames keep their alpha channel.
en_CA: ON: Remove alpha channel in resulting frames. Transparent parts are filled with the background colour.
    OFF: Layers in the resulting frames keep their alpha channel.

en: Global Layout Properties dialog already open
en_CA: Global Layout Properties dialogue already open

en: select input audiotrack in the videofile(s).(if your input videos have multiple audiotracks values > 1 usually refer to non-default language)
en_CA: select input audiotrack in the videofile(s). (if your input videos have multiple audiotracks, values > 1 usually refer to non-default language)

en: ON: Allow replacing of already existing audio clip references  in the storyboard
en_CA: ON: Allow replacement of existing audio clip references in the storyboard

en: Original tone track was not created.
    The storyboard %s
    has already audio clip references at track %d.
    Use another track number or allow replace at next try.
en_CA: Original tone track was not created.
    The storyboard %s
    already has audio clip references at track %d.
    Use another track number or allow replace at next try.

en: Master height of the resulting video in pixels)
en_CA: Master height of the resulting video in pixels

en: Select preferred video decoder library, or leave empty for automatic selection.The decoder setting is only relevant if videoclips are used (but not for frames that are imagefiles)
en_CA: Select preferred video decoder library, or leave empty for automatic selection.
    The decoder setting is only relevant if videoclips are used (but not for frames that are imagefiles)

en: COLOR
en_CA: COLOUR

en: Stepsize:
en_CA: Step size:

note: lower/upper step, page digits constrain lower/upper unconstrained
en: Stepsize density. Use 1.0 for normal 1:1 frame by frame steps. a value of 0.5 shows each input frame 2 times. a value of 2.0 shows only every 2.nd input frame
en_CA: Stepsize density. Use 1.0 for normal 1:1 frame by frame steps. A value of 0.5 shows each input frame 2 times. A value of 2.0 shows only every 2nd input frame

en: ON: emulate seek operations by seqeuntial reads, even when videoindex is available
en_CA: ON: emulate seek operations by sequential reads, even when videoindex is available

en: Framenumber for 1st extracted frame (use 0 for keeping original framenumbers)
en_CA: Framenumber for 1st extracted frame (use 0 to keep original framenumbers)

en: <Image>/Video/Layer/Colors/CurvesFile...
en_CA: <Image>/Video/Layer/Colours/CurvesFile...

en: Load color curve from file
en_CA: Load colour curve from file

en: Load curve from a GIMP curve file (that was saved with the GIMP's color curve tool)
en_CA: Load curve from a GIMP curve file (that was saved with the GIMP's colour curve tool)

en: <Image>/Video/Layer/Colors/Hue-Saturation...
en_CA: <Image>/Video/Layer/Colours/Hue-Saturation...

en: <Image>/Video/Layer/Colors/Levels...
en_CA: <Image>/Video/Layer/Colours/Levels...

note: The dialog1 and main vbox
en: Color Levels
en_CA: Colour Levels

note: the frame
en: Color Levels  Adjustments
en_CA: Colour Levels  Adjustments

en: ERROR: Cant overwrite temporary workfile
    file: %s
en_CA: ERROR: Cannot overwrite temporary workfile
    file: %s

en: extracting audio to tmp audiofile
en_CA: extracting audio to temporary audiofile

en: analyze line %d (out of %d)
en_CA: analyse line %d (out of %d)

en: Seek Inputvideoframe...
en_CA: Seek Input video frame...

en: Storyboardfiles are textfiles that are used to
    assemble a video from a list of single images,
    frameranges, videoclips, gif animations or audiofiles.
    the frames are organized in tracks,
    and allow fading, scale and move
    operations between the tracks.
    (see STORYBOARD_FILE_DOC.txt for details)
en_CA: Storyboard files are text files that are used to
    assemble a video from a list of single images,
    frame ranges, video clips, GIF animations or audio files.
    The frames are organized in tracks,
    and allow fading, scale and move
    operations between the tracks.
    (see STORYBOARD_FILE_DOC.txt for details)

en: Encoder specific parameter window is still open
en_CA: Encoder-specific parameter window is still open

en: ERROR: No valid storyboardfile was specified.
    (a storyboard file can be specified in the extras tab)
en_CA: ERROR: No valid storyboard file was specified.
    (a storyboard file can be specified in the extras tab)

en: Cant process the audio input file. You may check audio options and audio tool configuration
en_CA: Can't process the audio input file. You may check audio options and audio tool configuration

en: Input are all the layers of one image
en_CA: Input is all the layers of one image

en: Input are videoclips and frames, defined via storyboard file. (specify the storyboard filename in the extras tab)
en_CA: Input are video clips and frames, defined via storyboard file. (specify the storyboard filename in the extras tab)

en: Name of audiofile (.wav 16 bit mono or stereo samples preferred). Optional you may select a textfile that contains a list of file names referring to audio files. Each of those audio files will be encoded as separate audio track.
en_CA: Name of audiofile (.wav 16 bit mono or stereo samples preferred). Optionally you may select a textfile that contains a list of file names referring to audio files. Each of those audio files will be encoded as a separate audio track.

note: the resample general information label
en: 
    Note:
    if you set samplerate lower than
    rate of the WAV file, you loose sound quality,
    but higher samplerates can not improve the
    quality of the original sound.
en_CA: 
    Note:
    if you set samplerate lower than
    rate of the WAV file, you lose sound quality,
    but higher samplerates cannot improve the
    quality of the original sound.

en: Use fixed video quantiser scale (VBR) (0=const bitrate)
en_CA: Use fixed video quantizer scale (VBR) (0=const bitrate)

note: the dont_recode checkbutton
en: Dont Recode
en_CA: Don't Recode

en: Bypass the FFMPEG Vidoencoder where inputframes can be copied 1:1 from an input MPEG videofile.This experimental feature provides lossless MPEG video cut, but works only for the MPEG Fileformats.
en_CA: Bypass the FFMPEG Vido encoder where input frames can be copied 1:1 from an input MPEG video file. This experimental feature provides lossless MPEG video cuts, but works only for the MPEG file formats.

en: set ratecontrol buffere size (in kbyte)
en_CA: set ratecontrol buffer size (in kbyte)

note: the filecomment_label lable
en: 
    Text tags will be inserted in the
    resulting video for all non blank entry fields.
en_CA: 
    Text tags will be inserted in the
    resulting video for all non-blank entry fields.

en: use REAL video presets
en_CA: Use REAL video presets

en: This plugin sets ffmpeg specific video encoding parameters. Non-interactive callers must provide a parameterfile, Interactive calls provide a dialog window to specify and optionally save the parameters.
en_CA: This plugin sets ffmpeg specific video encoding parameters. Non-interactive callers must provide a parameterfile, Interactive calls provide a dialogue window to specify and optionally save the parameters.

en: FFMPEG initializing for video encoding ..
en_CA: FFMPEG initializing for video encoding...

en: The Singleframes Encoder
    writes single frames instead of one videofile
    the fileformat of the frames is derived from the
    extension of the video name, frames are named
    video name plus 6-digit number + extension
en_CA: The Singleframes Encoder
    Writes single frames instead of one videofile
    The file format of the frames is derived from the
    extension of the video name. Frames are named
    video name + 6-digit number + extension

en: Glade is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
    
    Glade is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License along with Glade; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
en_CA: Glade is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.
    
    Glade is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public Licence along with Glade; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

en: A builtin stock item
en_CA: A built-in stock item

en: A gdk color value
en_CA: A gdk colour value

note: Type
en: Type :
en_CA: Type:

en: Drag-n-Drop from %s to %s
en_CA: Drag-and-Drop from %s to %s

en: Alphanumerical
en_CA: Alphanumeric

en: Failed to load %s.
    The following required catalogs are unavailable: %s
en_CA: Failed to load %s.
    The following required catalogues are unavailable: %s

note: Atk click property
en: Set the description of the Click atk action
en_CA: Set the description of the Click ATK action

note: Atk press property
en: Set the description of the Press atk action
en_CA: Set the description of the Press ATK action

note: Atk release property
en: Set the description of the Release atk action
en_CA: Set the description of the Release ATK action

note: Atk activate property
en: Set the description of the Activate atk action
en_CA: Set the description of the Activate ATK action

en: Indicates that the object has content that flows logically from another AtkObject in a sequential way, (for instance text-flow)
en_CA: Indicates that the object has content that flows logically from another AtkObject in a sequential way (for instance, text-flow)

en: Error shutting down io channel %s: %s
en_CA: Error shutting down I/O channel %s: %s

en: The name of the widget catalog this class was declared by
en_CA: The name of the widget catalogue this class was declared by

en: This only applies with label type buttons
en_CA: This only applies to label type buttons

en: This only applies with stock type buttons
en_CA: This only applies to stock type buttons

en: This only applies with file type images
en_CA: This only applies to file type images

en: This only applies with stock type images
en_CA: This only applies to stock type images

en: A stock item, select None to choose a custom image and label
en_CA: A stock item. Select None to choose a custom image and label

note: #-#-#-#-#  75 (glade3)  #-#-#-#-# NOT AVAILABLES ON WIN32 <glade-widget-class name="GtkPlug" generic-name="plug" _title="Plug"/> <glade-widget-class name="GtkSocket" generic-name="socket" _title="Socket"/> #-#-#-#-#  77 (glade3)  #-#-#-#-#
en: About Dialog
en_CA: About Dialogue

en: Always Center
en_CA: Always Centre

en: Center on Parent
en_CA: Centre on Parent

en: Color Button
en_CA: Colour Button

en: Color Selection
en_CA: Colour Selection

en: Dialog Box
en_CA: Dialogue Box

en: File Chooser Dialog
en_CA: File Chooser Dialogue

en: Font Selection Dialog
en_CA: Font Selection Dialogue

en: Indicates that the object has content that flows logically to another AtkObject in a sequential way, (for instance text-flow)
en_CA: Indicates that the object has content that flows logically to another AtkObject in a sequential way (for instance, text-flow)

en: Input Dialog
en_CA: Input Dialogue

en: Message Dialog
en_CA: Message Dialogue

en: Ok, Cancel
en_CA: OK, Cancel

en: Proximity  Out
en_CA: Proximity Out

en: Recent Chooser Dialog
en_CA: Recent Chooser Dialogue

en: The response ID of this button in a dialog (it's NOT useful if this button is not in a GtkDialog)
en_CA: The response ID of this button in a dialogue (it's NOT useful if this button is not in a GtkDialog)

en: Page Setup Dialog
en_CA: Page Setup Dialogue

en: Print Dialog
en_CA: Print Dialogue

en: Contents Background Color
en_CA: Contents Background Colour

en: GNOME Color Picker
en_CA: GNOME Colour Picker

note: Deprecated Widget Classes :)
en: GNOME Dialog
en_CA: GNOME Dialogue

en: Logo Background Color
en_CA: Logo Background Colour

en: Text Foreground Color
en_CA: Text Foreground Colour

en: Title Foreground Color
en_CA: Title Foreground Colour

en: The license details of the application
en_CA: The licence details of the application

en: Wrap License:
en_CA: Wrap Licence:

en: If the license text should be wrapped
en_CA: If the licence text should be wrapped

en: Back. Color:
en_CA: Back. Colour:

en: The background color
en_CA: The background colour

en: The title of the color selection dialog
en_CA: The title of the colour selection dialogue

en: Color Chooser Button
en_CA: Colour Chooser Button

en: New dialog
en_CA: New dialogue

en: If the dialog has a horizontal separator above the buttons
en_CA: If the dialogue has a horizontal separator above the buttons

en: The window title of the file chooser dialog
en_CA: The window title of the file chooser dialogue

en: Whether a confirmation dialog will be displayed if a file will be overwritten
en_CA: Whether a confirmation dialogue will be displayed if a file will be overwritten

en: File Selection Dialog
en_CA: File Selection Dialogue

en: The title of the font selection dialog
en_CA: The title of the font selection dialogue

en: If the preview is color or grayscale
en_CA: If the preview is colour or grayscale

en: If a hint is set so the theme engine should draw rows in alternating colors
en_CA: If a hint is set so the theme engine should draw rows in alternating colours

en: If the window should receive the input focus when it is mapped
en_CA: Whether the window should receive the input focus when it is mapped

en: You can't paste into windows or dialogs.
en_CA: You can't paste into windows or dialogues.

en: Only buttons can be pasted into a dialog action area.
en_CA: Only buttons can be pasted into a dialogue action area.

en: The project directory is not set.
    Please set it using the Project Options dialog.
en_CA: The project directory is not set.
    Please set it using the Project Options dialogue.

en: The source directory is not set.
    Please set it using the Project Options dialog.
en_CA: The source directory is not set.
    Please set it using the Project Options dialogue.

en: The pixmaps directory is not set.
    Please set it using the Project Options dialog.
en_CA: The pixmaps directory is not set.
    Please set it using the Project Options dialogue.

en: The pixmap directory is not set.
    Please set it using the Project Options dialog.
en_CA: The pixmap directory is not set.
    Please set it using the Project Options dialogue.

en: The license which is added at the top of generated files
en_CA: The licence which is added at the top of generated files

en: Database error dialog
en_CA: Database error dialogue

en: Database login dialog
en_CA: Database login dialogue

en: Gnome About Dialog
en_CA: Gnome About Dialogue

en: Gnome Color Picker
en_CA: Gnome Colour Picker

en: If the dialog closes when any button is clicked
en_CA: If the dialogue closes when any button is clicked

en: If the dialog is hidden when it is closed, instead of being destroyed
en_CA: If the dialogue is hidden when it is closed, instead of being destroyed

en: Gnome Dialog Box
en_CA: Gnome Dialogue Box

en: Title Color:
en_CA: Title Colour:

en: The color of the title text
en_CA: The colour of the title text

en: The color of the main text
en_CA: The colour of the main text

en: The background color of the page
en_CA: The background colour of the page

en: Logo Back. Color:
en_CA: Logo Back. Colour:

en: The background color around the logo
en_CA: The background colour around the logo

en: Text Box Color:
en_CA: Text Box Colour:

en: The background color of the main text area
en_CA: The background colour of the main text area

en: Contents Back. Color:
en_CA: Contents Back. Colour:

en: The background color around the title
en_CA: The background colour around the title

en: The title of the file selection dialog
en_CA: The title of the file selection dialogue

en: If the file selection dialog should be modal
en_CA: If the file selection dialogue should be modal

en: The preview text to show in the font selection dialog
en_CA: The preview text to show in the font selection dialogue

en: Property Dialog Box
en_CA: Property Dialogue Box

en: If the widget can be the default action in a dialog
en_CA: If the widget can be the default action in a dialogue

en: If the widget is the default action in the dialog
en_CA: If the widget is the default action in the dialogue

en: You need to select a color or background to copy
en_CA: You need to select a colour or background to copy

en: You need to copy a color or background pixmap first
en_CA: You need to copy a colour or background pixmap first

en: You need to select a color to paste into
en_CA: You need to select a colour to paste into

en: The filename must be set in the Project Options dialog.
en_CA: The filename must be set in the Project Options dialogue.

en: The filename must be a simple relative filename.
    Use the Project Options dialog to set it.
en_CA: The filename must be a simple relative filename.
    Use the Project Options dialogue to set it.

en: Unexpected tag '%s', tag '%s' expected
en_CA: Unexpected tag '%s'; tag '%s' expected

[ctx: GDateTime]
note: Translators: this is the preferred format for expressing the date and the time
en: %a %b %e %H:%M:%S %Y
en_CA: %a %d %b %Y %r %Z

[ctx: GDateTime]
note: Translators: this is the preferred format for expressing the date
en: %m/%d/%y
en_CA: %F

[ctx: GDateTime]
note: Translators: this is the preferred format for expressing the time
en: %H:%M:%S
en_CA: %r

en: Template '%s' doesn't contain XXXXXX
en_CA: Template '%s' does not contain XXXXXX

en: Can't do a raw read in g_io_channel_read_to_end
en_CA: Cannot do a raw read in g_io_channel_read_to_end

en: Quoted text doesn't begin with a quotation mark
en_CA: Quoted text does not begin with a quotation mark

en: Error reading from unix: %s
en_CA: Error reading from UNIX: %s

en: Error closing unix: %s
en_CA: Error closing UNIX: %s

en: Error writing to unix: %s
en_CA: Error writing to UNIX: %s

en: <span weight="bold" size="larger">Connection Failed</span>
    
    Glom could not connect to the database server. Maybe you entered an incorrect user name or password, or maybe the postgres database server is not running.
en_CA: <span weight="bold" size="larger">Connection Failed</span>
    
    Glom could not connect to the database server. Maybe you entered an incorrect username or password, or maybe the postgres database server is not running.

en: <span weight="bold" size="larger">Database creation failed</span>
    
    Glom could not create the new database. Maybe you do not have the necessary access rights. Please contact your system administrator.
en_CA: <span weight="bold" size="larger">Database creation failed</span>
    
    Glom could not create the new database. Ensure that you have the necessary access rights. Please contact your system administrator.

en: <span weight="bold" size="larger">Invalid format</span>
    
    The data in the field was not recognized. Please try to correct the data or revert to the previous value. Here is an example of correctly-formatted data for this field.
en_CA: <span weight="bold" size="larger">Invalid format</span>
    
    The data in the field were not recognized. Please try to correct the data or revert to the previous values. Here is an example of correctly-formatted data for these fields.

en: <span weight="bold" size="larger">Test Translation</span>
    
    Choose a language to use temporarily to test the translations. These translations are normally used automatically when the application is started on a computer that uses the language.
    
    Note that the standard parts of the Glom user interface, such as menus and dialog windows, will only be translated when you start Glom on a computer that uses that language.
en_CA: <span weight="bold" size="larger">Test Translation</span>
    
    Choose a language to use temporarily to test the translations. These translations are normally used automatically when the application is started on a computer that uses the language.
    
    Note that the standard parts of the Glom user interface, such as menus and dialogue windows, will only be translated when you start Glom on a computer that uses that language.

en: Organisation
en_CA: Organization

en: State/County
en_CA: Province

en: Use 1000s separator
en_CA: Use thousands separator

en: This data cannot be stored in the database because you have not provided a primary key.
    Do you really want to discard this data?
en_CA: These data cannot be stored in the database because you have not provided a primary key.
    Do you really want to discard these data?

note: TODO: This is a very complex error message:
en: Data may not be entered into this related field, because the related record does not yet exist, and the key in the related record is auto-generated and therefore can not be created with the key value in this record.
en_CA: Data may not be entered into this related field, because the related record does not yet exist, and the key in the related record is auto-generated and therefore cannot be created with the key value in this record.

en: Are you sure that you would like to delete this record? The data in this record will then be permanently lost.
en_CA: Are you sure that you want to delete this record? The data in this record will then be permanently lost.

note: #-#-#-#-#  82 (gnome-backgrounds)  #-#-#-#-# Translators: This is the name of a desktop background image that shows an orange/red flower. You might want to translate it into the equivalent words of your language #-#-#-#-#  178 (MATE Desktop Environment)  #-#-#-#-# Translators: This is the name of a 
en: Fresh Flower
en_CA: Fresh Flower (a-choo!)

note: The license this software is under (GPL2+)
en: Gcalctool is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
    
    Gcalctool is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    
    You should have received a copy of the GNU General Public License
    along with Gcalctool; if not, write to the Free Software Foundation, Inc.,
    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
en_CA: Gcalctool is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public Licence as published by
    the Free Software Foundation; either version 2 of the Licence, or
    (at your option) any later version.
    
    Gcalctool is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public Licence for more details.
    
    You should have received a copy of the GNU General Public Licence
    along with Gcalctool; if not, write to the Free Software Foundation, Inc.,
    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

en: Kilometers
en_CA: Kilometres

[ctx: unit-symbols]
en: kilometer,kilometers,km,kms
en_CA: kilometre,kilometres,km,kms

en: Meters
en_CA: Metres

[ctx: unit-symbols]
en: meter,meters,m
en_CA: metre,metres,m

[ctx: unit-symbols]
en: centimeter,centimeters,cm,cms
en_CA: centimetre,centimetres,cm,cms

[ctx: unit-symbols]
en: millimeter,millimeters,mm
en_CA: millimetre,millimetres,mm

en: Micrometers
en_CA: Micrometres

[ctx: unit-symbols]
en: micrometer,micrometers,um
en_CA: micrometre,micrometres,um

en: Nanometers
en_CA: Nanometres

[ctx: unit-symbols]
en: nanometer,nanometers,nm
en_CA: nanometre,nanometres,nm

en: Square Meters
en_CA: Square Metres

en: Square Centimeters
en_CA: Square Centimetres

en: Square Millimeters
en_CA: Square Millimetres

en: Cubic Meters
en_CA: Cubic Metres

[ctx: unit-symbols]
en: litre,litres,liter,liters,L
en_CA: litre,litres,1re,1res,L

[ctx: unit-symbols]
en: millilitre,millilitres,milliliter,milliliters,mL,cm³
en_CA: millilitre,millilitres,milli1re,milli1res,mL,cm³

en: Edit Colors...
en_CA: Edit Colours...

en: Respect theme colors
en_CA: Respect theme colours

en: Other favorite apps
en_CA: Other favourite apps

en: Indicates the color filter array (CFA) geometric pattern of the image sensor when a one-chip color area sensor is used. It does not apply to all sensing methods.
en_CA: Indicates the colour filter array (CFA) geometric pattern of the image sensor when a one-chip colour area sensor is used. It does not apply to all sensing methods.

en: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.
en_CA: The reference black point value and reference white point value. No defaults are given in TIFF, but the values below are given as defaults here. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability these conditions.

en: The distance to the subject, given in meters.
en_CA: The distance to the subject, given in metres.

en: No default application found for the mime-type %s.
    Open the "File types and programs" page in the Control Center to add one.
en_CA: No default application found for the mime-type %s.
    Open the "File types and programs" page in the Control Centre to add one.

en: The name of the default search strategy to use on a dictionary source, if available. The default strategy is 'exact', that is match exact words.
en_CA: The name of the default search strategy to use on a dictionary source, if available. The default strategy is 'exact'; that is, match exact words.

en: New look up
en_CA: New lookup

en: <span size="large"><b>Updated plugins are available!</b></span>
en_CA: <span size="large"><b>Plugin updates are available!</b></span>

en: <b>First-launch Behavior</b>
en_CA: <b>First-launch Behaviour</b>

en: Special locations in GNOME, such as Computer and Network.
en_CA: Special locations in GNOME, such as Computer and Network

en: Internal GNOME Do Items
en_CA: Internal GNOME Do items

en: Changes the appearence of Do. Valid entries are Classic, Glass Frame, and Mini.
en_CA: Changes the appearance of Do. Valid entries are Classic, Glass Frame, and Mini.

en: Default tags to use on images posted with Do. Seperate tags with a space; for multiple word tags use quotes. ex.) concert "Mars Volta" Omar
en_CA: Default tags to use on images posted with Do. Separate tags with a space; for multiple word tags use quotes. ex.) concert "Mars Volta" Omar

en: Uncomplete
en_CA: Incomplete

en: There is no CD device set. This means that the CD player
    will be unable to run. Click 'Set device' to go to a dialog
    where you can set the device, or click 'Quit' to quit the CD player.
en_CA: There is no CD device set. This means that the CD player
    will be unable to run. Click 'Set device' to go to a dialogue
    where you can set the device, or click 'Quit' to quit the CD player.

en: The CD player is unable to run correctly.
    
    Press 'Details' for more details on reasons for the failure.
    
    Press 'Set device' to go to a dialog where you can set the device, or press 'Quit' to quit the CD player
en_CA: The CD player is unable to run correctly.
    
    Press 'Details' for more details on reasons for the failure.
    
    Press 'Set device' to go to a dialogue where you can set the device, or press 'Quit' to quit the CD player

en: Display the Remaining time ?
en_CA: Display the Remaining time?

en: How the time should be displayed while CD Player is playing ?
en_CA: How the time should be displayed while CD Player is playing?

en: What theme should the CD player use for its appearance
en_CA: Which theme the CD player should use for its appearance

en: front center
en_CA: front centre

en: The file "%s" is missing. This indicates that the application is installed incorrectly, so the dialog can't be displayed.
en_CA: The file "%s" is missing. This indicates that the application is installed incorrectly, so the dialogue can't be displayed.

en: Used for converting to CD-quality audio, but with a lossless compression codec. Use this if you later want to edit the file or burn it to CD.
en_CA: Used for converting to CD-quality audio, but with a lossless compression codec. Use this if you want to edit the file later or burn it to CD.

en: Used for converting to lossy voice-quality audio. Use this for recording speech that doesn't need to be edited.
en_CA: Used for converting to lossy voice-quality audio. Use this for recording speech that does not need to be edited.

en: Programs for Internet access such as web and email
en_CA: Programs for Internet access, such as web and email

en: Applications that did not fit in other categories
en_CA: Applications that do not fit in other categories

en: Accessibility related preferences
en_CA: Accessibility-related preferences

en: Change systemwide settings (affects all users)
en_CA: Change system-wide settings (affects all users)

en: 
    
    
    ==== Menu changed, reloading ====
en_CA: 
    
    
    ==== Menu changed; reloading ====

en: Color palette
en_CA: Colour palette

en: Default color of the background
en_CA: Default colour of the background

en: Default color of the background, as a color specification (can be HTML-style hex digits, or a color name such as "red").
en_CA: Default colour of the background, as a colour specification (can be HTML-style hex digits, or a colour name such as "red").

en: Default color of the text
en_CA: Default colour of the text

en: Default color of the text, as a color specification (can be HTML-style hex digits, or a color name such as "red").
en_CA: Default colour of the text, as a colour specification (can be HTML-style hex digits, or a colour name such as "red").

en: GNOME-Mud has a 16-color palette that MUDs can use. It must be specified in the form of a colon-separated list of color names. Color names should be in hex format e.g. "#FF00FF".
en_CA: GNOME-Mud has a 16-colour palette that MUDs can use. It must be specified in the form of a colon-separated list of colour names. Colour names should be in hex format e.g. "#FF00FF".

en: <b>Mud Details</b>
en_CA: <b>MUD Details</b>

en: Change the color of a specific color that the MUD requests to use.
en_CA: Change the colour of a specific colour that the MUD requests to use.

en: Color and Fonts
en_CA: Colour and Fonts

en: Color palette:
en_CA: Colour palette:

en: Default background color used when the connection doesn't request the use of a specific color.
en_CA: Default background colour used when the connection doesn't request the use of a specific colour.

en: Default foreground color used when the connection doesn't request the use of a specific color.
en_CA: Default foreground colour used when the connection doesn't request the use of a specific colour.

en: Foreground color:
en_CA: Foreground colour:

en: Network Devices Not Found
en_CA: No Network Devices Found

en: The file %s doesn't exist, please check if gnome-nettool is correctly installed
en_CA: The file %s doesn't exist. Please check if gnome-nettool is correctly installed

en: Enter the network address to trace a route to.
    For example: www.domain.com or 192.168.2.1
en_CA: Enter the network address to which to trace a route.
    For example: www.domain.com or 192.168.2.1

en: Enter the network address to lookup.
    For example: www.domain.com or 192.168.2.1
en_CA: Enter the network address to look up.
    For example: www.domain.com or 192.168.2.1

en: Enter a domain address to lookup its whois information.
    For example: www.domain.com or 192.168.2.1
en_CA: Enter a domain address to look up its whois information.
    For example: www.domain.com or 192.168.2.1

en: Getting information of %s on "%s"
en_CA: Getting information about %s on "%s"

en: Getting information of all users on "%s"
en_CA: Getting information about all users on "%s"

en: Getting the whois information of %s
en_CA: Getting the whois information about %s

en: Selection Box Color
en_CA: Selection Box Colour

en: Color of the selection box
en_CA: Colour of the selection box

en: Couldn't create phone listener.
en_CA: Could not create phone listener.

en: _Infra red (/dev/ircomm0)
en_CA: _Infrared (/dev/ircomm0)

en: A CORBA error occurred whilst accessing the address book.
en_CA: A CORBA error occurred while accessing the address book.

en: Gnome schedule
en_CA: GNOME schedule

note: Translators: Date format for expressions like 'January 21'. %B is month, %d is day number. Run the command 'man strftime' to read more about these and other available specifiers.
en: %B %d
en_CA: %d %B

note: Translators: Date format for expressions like 'January 21, 2005'. %B is month, %d is day number, %Y is year with century. Run the command 'man strftime' to read more about these and other available specifiers.
en: %B %d, %Y
en_CA: %d %B, %Y

en: About Gnome Schedule
en_CA: About GNOME Schedule

en: Gnome Schedule
en_CA: GNOME Schedule

en: ERROR: Could not load menu xml file
en_CA: ERROR: Could not load menu XML file

en: Set this to TRUE to lock the screen when the screensaver goes active.
en_CA: Set this to TRUE to lock the screen when the screensaver activates.

en: Set this to TRUE to offer an option in the unlock dialog to switch to a different user account.
en_CA: Set this to TRUE to offer an option in the unlock dialogue to switch to a different user account.

en: Set this to TRUE to offer an option in unlock dialog to logging out after a delay. The Delay is specified in the "logout_delay" key.
en_CA: Set this to TRUE to offer an option in the unlock dialogue to log out after a delay. The delay is specified in the "logout_delay" key.

en: The number of minutes after the screensaver activation before a logout option will appear in unlock dialog. This key has effect only if the "logout_enable" key is set to TRUE.
en_CA: The number of minutes after screensaver activation before a logout option will appear in the unlock dialogue. This key has effect only if the "logout_enable" key is set to TRUE.

en: The number of minutes after the screensaver activation until the monitor goes into suspend power mode.
en_CA: The number of minutes after the screensaver activation until the monitor goes into power suspend mode.

en: A pop-art-ish grid of pulsing colors.
en_CA: A pop-art-ish grid of pulsing colours.

en: Cannot communicate with gdm, perhaps you have an old version running.
en_CA: Cannot communicate with GDM. Perhaps you have an old version running.

en: The nested X server (Xnest) is not available, or gdm is badly configured.
    Please install the Xnest package in order to use the nested login.
en_CA: The nested X server (Xnest) is not available, or GDM is misconfigured.
    Please install the Xnest package in order to use the nested login.

en: The X server is not available, it is likely that gdm is badly configured.
en_CA: The X server is not available. GDM may be misconfigured.

en: Too many messages were sent to gdm and it hung upon us.
en_CA: Too many messages were sent to GDM and it hung up on us.

en: Unknown error occured.
en_CA: Unknown error occurred.

en: Show the logout button
en_CA: Show the "logout" button

en: Show the switch user button
en_CA: Show the "switch user" button

en: Set the text of "Name contains" search option
en_CA: Set the text of the "Name contains" search option

en: Set the text of "Look in folder" search option
en_CA: Set the text of the "Look in folder" search option

en: The search results may be out of date or invalid.  Do you want to disable the quick search feature?
en_CA: The search results may be out-of-date or invalid.  Do you want to disable the quick search feature?

en: If enabled, gnome-session will save the session automatically. Otherwise, the logout dialog will have an option to save the session.
en_CA: If enabled, gnome-session will save the session automatically. Otherwise, the logout dialogue will have an option to save the session.

en: The GNOME session manager was unable to lock the file '%s'.  Please report this as a GNOME bug.  Sometimes this error may occur if the file's directory is unwritable, you could try logging in via the failsafe session and ensuring that it is.
en_CA: The GNOME session manager was unable to lock the file '%s'.  Please report this as a GNOME bug.  Sometimes this error may occur if the file's directory is unwritable.  You could try logging in via the failsafe session and checking the directory.

en: The GNOME session manager was unable to read the file: '%s'.  If this file exists it must be readable by you for GNOME to work properly.  Try logging in with the failsafe session and removing this file.
en_CA: The GNOME session manager was unable to read the file '%s'.  If this file exists it must be readable by you for GNOME to work properly.  Try logging in with the failsafe session and removing this file.

en: Show the about dialog for the log viewer
en_CA: Show the "About" dialogue for the log viewer

en: Default graph background color
en_CA: Default graph background colour

en: Default graph cpu color
en_CA: Default graph CPU colour

en: Default graph frame color
en_CA: Default graph frame colour

en: Default graph mem color
en_CA: Default graph mem colour

en: Default graph net in color
en_CA: Default graph net in colour

en: Default graph net out color
en_CA: Default graph net out colour

en: Default graph swap color
en_CA: Default graph swap colour

en: Show warning dialog when hiding processes
en_CA: Show warning dialogue when hiding processes

en: Show warning dialog when killing processes
en_CA: Show warning dialogue when killing processes

en: Cannot change the priority of process with pid %d to %d.
    %s
en_CA: Cannot change the priority of process with PID %d to %d.
    %s

en: Cannot kill process with pid %d with signal %d.
    %s
en_CA: Cannot kill process with PID %d with signal %d.
    %s

note: translators: secondary alert message
en: Killing a process may destroy data, break the session or introduce a security risk. Only unresponding processes should be killed.
en_CA: Killing a process may destroy data, break the session or introduce a security risk. Only unresponsive processes should be killed.

note: translators: secondary alert message
en: Ending a process may destroy data, break the session or introduce a security risk. Only unresponding processes should be ended.
en_CA: Ending a process may destroy data, break the session or introduce a security risk. Only unresponsive processes should be ended.

en: Processes i_nfo showed in list:
en_CA: Process i_nfo showed in list:

en: _Grid color:
en_CA: _Grid colour:

en: <small><i><b>Note:</b> Terminal applications have these colors available to them.</i></small>
en_CA: <small><i><b>Note:</b> Terminal applications have these colours available to them.</i></small>

en: <small><i><b>Note:</b> These options may cause some applications to behave incorrectly.  They are only here to allow you to work around certain applications and operating systems that expect different terminal behavior.</i></small>
en_CA: <small><i><b>Note:</b> These options may cause some applications to behave incorrectly.  They are only here to allow you to work around certain applications and operating systems that expect different terminal behaviour.</i></small>

en: Choose Terminal Background Color
en_CA: Choose Terminal Background Colour

en: Choose Terminal Text Color
en_CA: Choose Terminal Text Colour

en: Color _palette:
en_CA: Colour _palette:

en: Replaces initial title
    Goes before initial title
    Goes after initial title
    Isn't displayed
en_CA: Replaces initial title
    Goes before initial title
    Goes after initial title
    Is not displayed

en: Use colors from s_ystem theme
en_CA: Use colours from s_ystem theme

en: _None (use solid color)
en_CA: _None (use solid colour)

en: _Text color:
en_CA: _Text colour:

en: Default color of terminal background
en_CA: Default colour of terminal background

en: Default color of terminal background, as a color specification (can be HTML-style hex digits, or a color name such as "red").
en_CA: Default colour of terminal background, as a colour specification (can be HTML-style hex digits, or a colour name such as "red").

en: Default color of text in the terminal
en_CA: Default colour of text in the terminal

en: Default color of text in the terminal, as a color specification (can be HTML-style hex digits, or a color name such as "red").
en_CA: Default colour of text in the terminal, as a colour specification (can be HTML-style hex digits, or a colour name such as "red").

en: If true, the theme color scheme used for text entry boxes will be used for the terminal, instead of colors provided by the user.
en_CA: If true, the theme colour scheme used for text entry boxes will be used for the terminal, instead of colours provided by the user.

en: Keyboard shortcut key for bringing up the dialog for profile creation. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.
en_CA: Keyboard shortcut key for bringing up the dialogue for profile creation. Expressed as a string in the same format used for GTK+ resource files. If you set the option to the special string "disabled", then there will be no keyboard shortcut for this action.

note: Translators: S/Key is the name of an application, so it should not be translated.
en: Popup a dialog when an S/Key challenge response query is detected and clicked on. Typing a password into the dialog will send it to the terminal.
en_CA: Pop up a dialogue when an S/Key challenge response query is detected and clicked on. Typing a password into the dialogue will send it to the terminal.

en: Terminals have a 16-color palette that applications inside the terminal can use. This is that palette, in the form of a colon-separated list of color names. Color names should be in hex format e.g. "#FF00FF"
en_CA: Terminals have a 16-colour palette that applications inside the terminal can use. This is that palette, in the form of a colon-separated list of colour names. Colour names should be in hex format e.g. "#FF00FF"

en: Type of terminal background. May be "solid" for a solid color, "image" for an image, or "transparent" for pseudo-transparency.
en_CA: Type of terminal background. May be "solid" for a solid colour, "image" for an image, or "transparent" for pseudo-transparency.

en: Whether to use the colors from the theme for the terminal widget
en_CA: Whether to use the colours from the theme for the terminal widget

en: Choose Palette Color %d
en_CA: Choose Palette Colour %d

en: The text you clicked on doesn't seem to be a valid S/Key challenge.
en_CA: The text you clicked on does not seem to be a valid S/Key challenge.

en: The text you clicked on doesn't seem to be a valid OTP challenge.
en_CA: The text you clicked on does not seem to be a valid OTP challenge.

en: Could not parse string "%s" as a color palette
en_CA: Could not parse string "%s" as a colour palette

en: Color dropped on terminal had wrong format (%d) or length (%d)
en_CA: Colour dropped on terminal had wrong format (%d) or length (%d)

en: This window has one tab open. Closing the window will close it. | This window has %d tabs open. Closing the window will also close all of its tabs.
en_CA[0]: This window has one tab open. Closing the window will close it.
en_CA[1]: This window has %d tabs open. Closing the window will also close all its tabs.

en: Click to open new profile dialog
en_CA: Click to open new profile dialogue

en: Click to open edit profile dialog
en_CA: Click to open edit profile dialogue

en: If this is true, the Public directory in the users home directory will be shared when the user is logged in.
en_CA: If this is true, the Public directory in the user's home directory will be shared when the user is logged in.

note: GNOME_VFS_ERROR_READ_ONLY_FILE_SYSTEM
en: Read only file system
en_CA: Read-only file system

en: Couldn't run mount process in a pty
en_CA: Could not run mount process in a pty

en: Couldn't send password to mount process.
en_CA: Could not send password to mount(1) process.

en: This happens when you log in to a computer the first time.
    
    The identity sent by the remote computer is %s. If you want to be absolutely sure it is safe to continue, contact the system administrator.
en_CA: This happens when you log in to a computer for the first time.
    
    The identity sent by the remote computer is %s. If you want to be absolutely sure it is safe to continue, contact the system administrator.

en: The application to use for viewing files that require a component to view them. The parameter %s will be replaced by the file's URIs, the parameter %c will be replaced by the component IID.
en_CA: The application to use for viewing files that require a component to view them. The parameter %s will be replaced by the file's URIs, and the parameter %c will be replaced by the component IID.

en: Comma separated list of DNS-SD domains that should be visible in the "network:///" location.
en_CA: Comma-separated list of DNS-SD domains that should be visible in the "network:///" location.

en: Extra domains to look for DNS-SD services in
en_CA: Extra domains in which to look for DNS-SD services

en: Select the proxy configuration mode. Supported values are "none", "manual", "auto".
en_CA: Select the proxy configuration mode. Supported values are "none", "manual", and "auto".

en: User name to pass as authentication when doing HTTP proxying.
en_CA: Username to pass as authentication when doing HTTP proxying.

en: Preparing to burn DVD
en_CA: Formatting DVD

en: Converting %s to cd audio
en_CA: Converting %s to CD Audio

en: %s kb/s
en_CA: %s Kb/s

en: Choose the mp3-/ogg-encoder that should be used, or to record as a uncompressed wave file
en_CA: Choose the MP3-/OGG-encoder that should be used, or choose to record as an uncompressed wave file

en: Choose the bitrate in which the mp3/ogg will be encoded
en_CA: Choose the bitrate in which the MP3/OGG will be encoded

note: consult man strftime to translate this. This is a filename, so don't use "/" or ":", please
en: %B-%d-%Y_%H-%M-%S
en_CA: %d-%B-%Y_%H-%M-%S

note: Feel free to put your names here translators :-)
en: TRANSLATORS
en_CA: Adam Weinberger  <adamw@gnome.org>

en: A GNUmed slave client has been started because
    no running client could be found. You will now
    have to enter your user name and password into
    the login dialog as usual.
    
    Switch to the GNUmed login dialog now and proceed
    with the login procedure. Once GNUmed has started
    up successfully switch back to this window.
en_CA: A GNUmed slave client has been started because
    no running client could be found. You will now
    have to enter your user name and password into
    the login dialogue as usual.
    
    Switch to the GNUmed login dialogue now and proceed
    with the login procedure. Once GNUmed has started
    up successfully switch back to this window.

en: Translate this or i18n into <en_EN> will not work properly !
en_CA: Translate this or i18n into <en_CA> will not work properly !

en: Too many arguments for function '%s', MS Excel can only handle %d not %d
en_CA: Too many arguments for function '%s'. MS Excel can only handle %d not %d

en: >This value determines the default setting in the Print Setup dialog whether print grid lines. Please use the Print Setup dialog to edit this value.
en_CA: >This value determines the default setting in the Print Setup dialogue for whether to print grid lines. Please use the Print Setup dialogue to edit this value.

en: Default Horizontal Centering
en_CA: Default Horizontal Centring

en: Default Vertical Centering
en_CA: Default Vertical Centring

en: Please use the Print Setup dialog to edit this value.
en_CA: Please use the Print Setup dialogue to edit this value.

en: Some dialogs contain only a single entry field that allows range selections in the workbook. Setting this variable to TRUE directs selections to this entry even if the entry does not have keyboard focus.
en_CA: Some dialogues contain only a single entry field that allows range selections in the workbook. Setting this variable to TRUE directs selections to this entry even if the entry does not have keyboard focus.

en: The default page footer for new documents that can be modified using the page setup dialog.
en_CA: The default page footer for new documents that can be modified using the page setup dialogue.

en: The default page header for new documents that can be modified using the page setup dialog.
en_CA: The default page header for new documents that can be modified using the page setup dialogue.

en: This string gives the default region to be repeated at the left of each printed sheet. Please use the Print Setup dialog to edit this value.
en_CA: This string gives the default region to be repeated at the left of each printed sheet. Please use the Print Setup dialogue to edit this value.

en: This string gives the default region to be repeated at the top of each printed sheet. Please use the Print Setup dialog to edit this value.
en_CA: This string gives the default region to be repeated at the top of each printed sheet. Please use the Print Setup dialogue to edit this value.

en: This value determines the default setting in the Print Setup dialog whether to print empty but formatted cells. Please use the Print Setup dialog to edit this value.
en_CA: This value determines the default setting in the Print Setup dialogue whether to print empty but formatted cells. Please use the Print Setup dialogue to edit this value.

en: This value determines the default setting in the Print Setup dialog whether to print first right then down. Please use the Print Setup dialog to edit this value.
en_CA: This value determines the default setting in the Print Setup dialogue whether to print first right then down. Please use the Print Setup dialogue to edit this value.

en: This value determines the default setting in the Print Setup dialog whether to print in only black and white. Please use the Print Setup dialog to edit this value.
en_CA: This value determines the default setting in the Print Setup dialogue whether to print in only black and white. Please use the Print Setup dialogue to edit this value.

en: This value determines the default setting in the Print Setup dialog whether to print row and column headers. Please use the Print Setup dialog to edit this value.
en_CA: This value determines the default setting in the Print Setup dialogue whether to print row and column headers. Please use the Print Setup dialogue to edit this value.

en: This value determines the default setting in the Print Setup dialog whether to scale pages by a given percentage. Please use the Print Setup dialog to edit this value.
en_CA: This value determines the default setting in the Print Setup dialogue whether to scale pages by a given percentage. Please use the Print Setup dialogue to edit this value.

en: This value determines whether by default the print set-up dialog applies to all sheets simultaneously.
en_CA: This value determines whether by default the print set-up dialogue applies to all sheets simultaneously.

en: This value gives the default number of points from the bottom of a page to the end of the body. Please use the Print Setup dialog to edit this value.
en_CA: This value gives the default number of points from the bottom of a page to the end of the body. Please use the Print Setup dialogue to edit this value.

en: This value gives the default number of points from the top of a page to the start of the body. Please use the Print Setup dialog to edit this value.
en_CA: This value gives the default number of points from the top of a page to the start of the body. Please use the Print Setup dialogue to edit this value.

en: This value gives the percentage by which to scale each printed page. Please use the Print Setup dialog to edit this value.
en_CA: This value gives the percentage by which to scale each printed page. Please use the Print Setup dialogue to edit this value.

en: Before an existing file is being overwritten, gnumeric will present a warning dialog. Setting this option will make the overwrite button in that dialog the default button.
en_CA: Before an existing file is being overwritten, gnumeric will present a warning dialogue. Setting this option will make the overwrite button in that dialogue the default button.

en: Setting this option will cause the sort buttons on the toolbar to perform a case-sensitive sort and determine the initial state of the case-sensitive checkbox in the sort dialog.
en_CA: Setting this option will cause the sort buttons on the toolbar to perform a case-sensitive sort and determine the initial state of the case-sensitive checkbox in the sort dialogue.

en: Setting this option will cause the sort buttons on the toolbar to preserve the cell formats while sorting and determines the initial state of the preserve-formats checkbox in the sort dialog.
en_CA: Setting this option will cause the sort buttons on the toolbar to preserve the cell formats while sorting and determines the initial state of the preserve-formats checkbox in the sort dialogue.

en: This option determines the initial state of the sort-order button in the sort dialog.
en_CA: This option determines the initial state of the sort-order button in the sort dialogue.

en: FormatToolbar
en_CA: Format Toolbar

en: StandardToolbar
en_CA: Standard Toolbar

en: Merge and Center %s
en_CA: Merge and Centre %s

en: Import Export
en_CA: Import/Export

en: All round powerhouse
en_CA: All-around powerhouse

en: Could not create the Advanced Filter dialog.
en_CA: Could not create the Advanced Filter dialogue.

en: Could not create the Correlation Tool dialog.
en_CA: Could not create the Correlation Tool dialogue.

en: Could not create the Covariance Tool dialog.
en_CA: Could not create the Covariance Tool dialogue.

en: Could not create the Rank and Percentile Tools dialog.
en_CA: Could not create the Rank and Percentile Tools dialogue.

en: Could not create the Fourier Analysis Tool dialog.
en_CA: Could not create the Fourier Analysis Tool dialogue.

en: Could not create the Descriptive Statistics Tool dialog.
en_CA: Could not create the Descriptive Statistics Tool dialogue.

en: Could not create the Mean Tests Tool dialog.
en_CA: Could not create the Mean Tests Tool dialogue.

en: Could not create the FTest Tool dialog.
en_CA: Could not create the FTest Tool dialogue.

en: Could not create the Sampling Tool dialog.
en_CA: Could not create the Sampling Tool dialogue.

en: Could not create the Regression Tool dialog.
en_CA: Could not create the Regression Tool dialogue.

en: Could not create the Exponential Smoothing Tool dialog.
en_CA: Could not create the Exponential Smoothing Tool dialogue.

en: Could not create the Moving Average Tool dialog.
en_CA: Could not create the Moving Average Tool dialogue.

en: Could not create the Histogram Tool dialog.
en_CA: Could not create the Histogram Tool dialogue.

en: Could not create the ANOVA (single factor) tool dialog.
en_CA: Could not create the ANOVA (single factor) tool dialogue.

en: Could not create the ANOVA (two factor) tool dialog.
en_CA: Could not create the ANOVA (two factor) tool dialogue.

en: Could not create the autosave dialog.
en_CA: Could not create the autosave dialogue.

en: Could not create the Consolidate dialog.
en_CA: Could not create the Consolidate dialogue.

en: Could not create the Delete Cell dialog.
en_CA: Could not create the Delete Cell dialogue.

en: Could not create the Fill Series dialog.
en_CA: Could not create the Fill Series dialogue.

en: Could not create the Goal-Seek dialog.
en_CA: Could not create the Goal-Seek dialogue.

en: Could not create the goto dialog.
en_CA: Could not create the goto dialogue.

en: Could not create the hyperlink dialog.
en_CA: Could not create the hyperlink dialogue.

en: Could not create the Insert Cell dialog.
en_CA: Could not create the Insert Cell dialogue.

en: Could not create the Random Tool dialog.
en_CA: Could not create the Random Tool dialogue.

en: Could not create the Scenario Add dialog.
en_CA: Could not create the Scenario Add dialogue.

en: Could not create the Scenarios dialog.
en_CA: Could not create the Scenarios dialogue.

en: Could not create the Data Shuffling dialog.
en_CA: Could not create the Data Shuffling dialogue.

en: Could not create the Simulation dialog.
en_CA: Could not create the Simulation dialogue.

en: Could not create the Solver dialog.
en_CA: Could not create the Solver dialogue.

en: Ce_nter
en_CA: Ce_ntre

en: Center across _selection
en_CA: Centre across _selection

en: Lower the selected sheet in the list of to be exported sheets to be exported later.
en_CA: Lower the selected sheet in the list of to-be-exported sheets to be exported later.

en: Move the selected sheet to the end of the list of to be exported sheets to be exported last.
en_CA: Move the selected sheet to the end of the list of to-be-exported sheets to be exported last.

en: Move the selected sheet to the top of the list of to be exported sheets to be exported first.
en_CA: Move the selected sheet to the top of the list of to-be-exported sheets to be exported first.

en: Raise the selected sheet in the list of to be exported sheets to be exported earlier.
en_CA: Raise the selected sheet in the list of to-be-exported sheets to be exported earlier.

en: Dismiss search center
en_CA: Dismiss search centre

en: Enables some print debugging behavior
en_CA: Enables some print debugging behaviour

en: Don't display warning dialogs when importing
en_CA: Do not display warning dialogues when importing

en: Should we query for each replacement?
en_CA: Query for each replacement?

en: text-is-rtl
en_CA: text-is-RTL

en: Control whether zeros are shown are blanked out.
en_CA: Control whether zeros are shown blanked out.

en: The foreground color of the tab.
en_CA: The foreground colour of the tab.

en: The background color of the tab.
en_CA: The background colour of the tab.

en: Browse to Gnumeric's website
en_CA: Browse Gnumeric's website

en: Center horizontally
en_CA: Centre horizontally

en: _Center Across Selection
en_CA: _Centre Across Selection

en: Center horizontally across the selection
en_CA: Centre horizontally across the selection

en: _Merge and Center
en_CA: _Merge and Centre

en: Merge the selection into 1 cell, and center horizontaly.
en_CA: Merge the selection into 1 cell, and centre horizontaly.

en: _Vertically Center
en_CA: _Vertically Centre

en: Vertically Center
en_CA: Vertically Centre

en: Center Vertically
en_CA: Centre Vertically

en: Set Foreground Color
en_CA: Set Foreground Colour

note: Set background to NONE
en: Set Background Color
en_CA: Set Background Colour

en: Changing sheet tab colors
en_CA: Changing sheet tab colours

en: A button like template
en_CA: A button-like template

en: A classical yet colorful template
en_CA: A classical yet colourful template

en: Desert colored financial template
en_CA: Desert coloured financial template

en: Financial style with cold border color
en_CA: Financial style with cold border colour

en: An advanced colorless template
en_CA: An advanced colourless template

en: location:the center of the distribution
en_CA: location:the centre of the distribution

en: dark gray
en_CA: dark grey

en: light gray
en_CA: light grey

en: A file called <i>%s</i> already exists in %s.
    
    Do you want to save over it?
en_CA: A file named <i>%s</i> already exists in %s.
    
    Do you want to overwrite it?

en: _Vary colors by slice
en_CA: _Vary colours by slice

en: Cen_ter size:
en_CA: Cen_tre size:

en: _Vary colors by bubble
en_CA: _Vary colours by bubble

en: Custom Color...
en_CA: Custom Colour...

en: Mealmaster (tm) Export
en_CA: Mealmaster™ Export

en: A template to create a HTML page with some tasks and tags. Tags colors are also displayed.
en_CA: A template to create a HTML page with some tasks and tags. Tag colours are also displayed.

en: A simple Web page that can be easily printed.
en_CA: A simple web page that can be easily printed.

en: Text-only
en_CA: Text only

en: <small>Distance in kilometers from 
    the current location.</small>
en_CA: <small>Distance in kilometres from 
    the current location.</small>

en: Send via email
en_CA: Send via e-mail

en: Everything necessary to run this plugin is available.
en_CA: Everything necessary to run this plug-in is available.

en: Imports your twitter  messages into your GTG
en_CA: Imports your Twitter messages into your GTG

en: GThumb Catalog View
en_CA: GThumb Catalogue View

en: View as Catalog
en_CA: View as Catalogue

en: Prevous
en_CA: Previous

en: Choose a Catalog
en_CA: Choose a Catalogue

en: _New Catalog
en_CA: _New Catalogue

en: <b>Color levels</b>
en_CA: <b>Colour levels</b>

en: Frame co_lor:
en_CA: Frame co_lour:

en: Select a color
en_CA: Select a colour

en: _Solid color
en_CA: _Solid colour

en: As_k confirmation before deleting images or catalogs
en_CA: As_k confirmation before deleting images or catalogues

en: Go to last _visited folder or catalog
en_CA: Go to last _visited folder or catalogue

en: Center _on Page
en_CA: Centre _on Page

en: Cannot remove catalog "%s": %s
en_CA: Cannot remove catalogue "%s": %s

en: Cannot open catalog "%s": %s
en_CA: Cannot open catalogue "%s": %s

en: Cannot save catalog "%s": %s
en_CA: Cannot save catalogue "%s": %s

en: Enter the catalog name:
en_CA: Enter the catalogue name:

en: Move Catalog to...
en_CA: Move Catalogue to...

en: Could not rename the catalog "%s": %s
en_CA: Could not rename the catalogue "%s": %s

en: The selected catalog will be removed, are you sure?
en_CA: The selected catalogue will be removed, are you sure?

en: New Catalog
en_CA: New Catalogue

en: Could not create the catalog "%s": %s
en_CA: Could not create the catalogue "%s": %s

en: _Add to Catalog...
en_CA: _Add to Catalogue...

en: Add selected images to a catalog
en_CA: Add selected images to a catalogue

en: Remo_ve from Catalog
en_CA: Remo_ve from Catalogue

en: Remove selected images from the catalog
en_CA: Remove selected images from the catalogue

en: Open the selected catalog
en_CA: Open the selected catalogue

en: Open the selected catalog in a new window
en_CA: Open the selected catalogue in a new window

en: Rename selected catalog
en_CA: Rename selected catalogue

en: Remove selected catalog
en_CA: Remove selected catalogue

en: Move selected catalog to another location
en_CA: Move selected catalogue to another location

en: _New Catalog...
en_CA: _New Catalogue...

en: Create a new catalog
en_CA: Create a new catalogue

en: Create a new catalog library
en_CA: Create a new catalogue library

en: Rename current catalog
en_CA: Rename current catalogue

en: Remove current catalog
en_CA: Remove current catalogue

en: Move current catalog to another location
en_CA: Move current catalogue to another location

en: _Catalogs
en_CA: _Catalogues

en: View the catalogs
en_CA: View the catalogues

en: The specified catalog does not exist.
en_CA: The specified catalogue does not exist.

en: Reduce Colors
en_CA: Reduce Colours

en: View the image with negative colors
en_CA: View the image with negative colours

en: Automatically adjust the color levels
en_CA: Automatically adjust the colour levels

en: Reduce the number of colors
en_CA: Reduce the number of colours

en: _Color Balance
en_CA: _Colour Balance

en: Adjust color balance
en_CA: Adjust colour balance

en: _Centered
en_CA: _Centred

en: Set the image as desktop background (centered)
en_CA: Set the image as desktop background (centeed)

note: Placeholder in --max-colors=COLORS in --help output
en: COLORS
en_CA: COLOURS

en: The license of the program
en_CA: The licence of the program

note: #-#-#-#-#  134 (gtk+)  #-#-#-#-# Add the license button #-#-#-#-#  136 (gtk+)  #-#-#-#-# #-#-#-#-#  216 (gtk+)  #-#-#-#-# #-#-#-#-#  218 (gtk+)  #-#-#-#-#
en: _License
en_CA: _Licence

en: Received invalid color data
en_CA: Received invalid colour data

en: Select the color you want from the outer ring. Select the darkness or lightness of that color using the inner triangle.
en_CA: Select the colour you want from the outer ring. Select the darkness or lightness of that colour using the inner triangle.

en: Position on the color wheel.
en_CA: Position on the colour wheel.

en: "Deepness" of the color.
en_CA: "Deepness" of the colour.

en: Brightness of the color.
en_CA: Brightness of the colour.

en: Amount of red light in the color.
en_CA: Amount of red light in the colour.

en: Amount of green light in the color.
en_CA: Amount of green light in the colour.

en: Amount of blue light in the color.
en_CA: Amount of blue light in the colour.

en: Transparency of the color.
en_CA: Transparency of the colour.

note: #-#-#-#-#  187 (MATE Desktop Environment)  #-#-#-#-# make the name label and field
en: Color _name:
en_CA: Colour _name:

en: You can enter an HTML-style hexadecimal color value, or simply a color name such as 'orange' in this entry.
en_CA: You can enter an HTML-style hexadecimal colour value, or simply a colour name such as 'orange' in this entry.

en: Color Wheel
en_CA: Colour Wheel

en: The previously-selected color, for comparison to the color you're selecting now. You can drag this color to a palette entry, or select this color as current by dragging it to the other color swatch alongside.
en_CA: The previously-selected colour, for comparison to the colour you're selecting now. You can drag this colour to a palette entry, or select this colour as current by dragging it to the other colour swatch alongside.

en: The color you've chosen. You can drag this color to a palette entry to save it for use in the future.
en_CA: The colour you've chosen. You can drag this colour to a palette entry to save it for use in the future.

en: _Save color here
en_CA: _Save colour here

en: Click this palette entry to make it the current color. To change this entry, drag a color swatch here or right-click it and select "Save color here."
en_CA: Click this palette entry to make it the current colour. To change this entry, drag a colour swatch here or right-click it and select "Save colour here."

en: The folder could not be created, as a file with the same name already exists.  Try using a different name for the folder, or rename the file first.
en_CA: The folder could not be created because a file with the same name already exists.  Try using a different name for the folder, or rename the file first.

en: Some of the settings in the dialog conflict
en_CA: Some of the settings in the dialogue conflict

en: Two Sided
en_CA: Two-Sided

en: Colorspace
en_CA: Colourspace

en: The colorspace in which the samples are interpreted
en_CA: The colourspace in which the samples are interpreted

en: Wrap license
en_CA: Wrap licence

en: Whether to wrap the license text.
en_CA: Whether to wrap the licence text.

en: Extra space to put between the child and its neighbors, in pixels
en_CA: Extra space to put between the child and its neighbours, in pixels

en: Cell background color name
en_CA: Cell background colour name

en: Cell background color as a string
en_CA: Cell background colour as a string

en: Cell background color
en_CA: Cell background colour

en: Cell background color as a GdkColor
en_CA: Cell background colour as a GdkColor

en: Whether this tag affects the cell background color
en_CA: Whether this tag affects the cell background colour

en: If FALSE, don't allow to enter strings other than the chosen ones
en_CA: If FALSE, don't allow strings other than the chosen ones to be entered

en: Whether the rendered pixbuf should be colorized according to the state
en_CA: Whether the rendered pixbuf should be colourized according to the state

en: Background color name
en_CA: Background colour name

en: Background color as a string
en_CA: Background colour as a string

en: Background color as a GdkColor
en_CA: Background colour as a GdkColor

en: Foreground color name
en_CA: Foreground colour name

en: Foreground color as a string
en_CA: Foreground colour as a string

en: Foreground color as a GdkColor
en_CA: Foreground colour as a GdkColor

en: Whether this tag affects the background color
en_CA: Whether this tag affects the background colour

en: Whether this tag affects the foreground color
en_CA: Whether this tag affects the foreground colour

en: Whether or not to give the color an alpha value
en_CA: Whether or not to give the colour an alpha value

en: The selected color
en_CA: The selected colour

en: Whether the color selector should allow setting opacity
en_CA: Whether the colour selector should allow setting opacity

en: The current color
en_CA: The current colour

en: Palette to use in the color selector
en_CA: Palette to use in the colour selector

en: The dialog has a separator bar above its buttons
en_CA: The dialogue has a separator bar above its buttons

en: Width of border around the main dialog area
en_CA: Width of border around the main dialogue area

en: Width of border around the button area at the bottom of the dialog
en_CA: Width of border around the button area at the bottom of the dialogue

en: Whether to activate the default widget (such as the default button in a dialog) when Enter is pressed
en_CA: Whether to activate the default widget (such as the default button in a dialogue) when Enter is pressed

en: Popup single match
en_CA: Pop up single match

en: Whether a file chooser in save mode will present an overwrite confirmation dialog if necessary.
en_CA: Whether a file chooser in save mode will present an overwrite confirmation dialogue if necessary.

en: The file chooser dialog to use.
en_CA: The file chooser dialogue to use.

en: The title of the file chooser dialog.
en_CA: The title of the file chooser dialogue.

en: Angle at which the label is rotated
en_CA: Angle to which the label is rotated

en: A boolean that indicates whether the menu is torn-off
en_CA: A boolean that indicates whether the menu is torn off

en: Width of border around the label and image in the message dialog
en_CA: Width of border around the label and image in the message dialogue

en: Whether to put a separator between the message dialog's text and the buttons
en_CA: Whether to put a separator between the message dialogue's text and the buttons

en: The buttons shown in the message dialog
en_CA: The buttons shown in the message dialogue

en: The primary text of the message dialog
en_CA: The primary text of the message dialogue

en: The secondary text of the message dialog
en_CA: The secondary text of the message dialogue

en: Whether to expand the child's tab or not
en_CA: Whether or not to expand the child's tab

en: Whether the child's tab should fill the allocated area or not
en_CA: Whether or not the child's tab should fill the allocated area

en: The GtkPrintSettings used for initializing the dialog
en_CA: The GtkPrintSettings used for initializing the dialogue

en: Show Dialog
en_CA: Show Dialogue

en: TRUE if a progress dialog is shown while printing.
en_CA: TRUE if a progress dialogue is shown while printing.

en: TRUE if print process may run asynchronous.
en_CA: TRUE if print process may run asynchronously.

en: The radio action whose group this action belongs to.
en_CA: The radio action to whose group this action belongs.

en: The radio button whose group this widget belongs to.
en_CA: The radio button to whose group this widget belongs.

en: Whether buttons in dialogs should use the alternative button order
en_CA: Whether buttons in dialogues should use the alternative button order

en: Color scheme
en_CA: Colour scheme

en: A palette of named colors for use in themes
en_CA: A palette of named colours for use in themes

en: Color Hash
en_CA: Colour Hash

en: A hash table representation of the color scheme.
en_CA: A hash table representation of the colour scheme.

en: Background color as a (possibly unallocated) GdkColor
en_CA: Background colour as a (possibly unallocated) GdkColor

en: Whether the background color fills the entire line height or only the height of the tagged characters
en_CA: Whether the background colour fills the entire line height or only the height of the tagged characters

en: Foreground color as a (possibly unallocated) GdkColor
en_CA: Foreground colour as a (possibly unallocated) GdkColor

en: Left, right, or center justification
en_CA: Left, right, or centre justification

en: Paragraph background color name
en_CA: Paragraph background colour name

en: Paragraph background color as a string
en_CA: Paragraph background colour as a string

en: Paragraph background color
en_CA: Paragraph background colour

en: Paragraph background color as a (possibly unallocated) GdkColor
en_CA: Paragraph background colour as a (possibly unallocated) GdkColor

en: Whether this tag affects the paragraph background color
en_CA: Whether this tag affects the paragraph background colour

en: Error underline color
en_CA: Error underline colour

en: Color with which to draw error-indication underlines
en_CA: Colour with which to draw error-indication underlines

en: If the tooltips of the toolbar should be active or not
en_CA: Whether or not the tooltips of the toolbar should be active

en: Set a hint to the theme engine to draw rows in alternating colors
en_CA: Set a hint to the theme engine to draw rows in alternating colours

en: Allow drawing of alternating color rows
en_CA: Allow drawing of alternating colour rows

en: Even Row Color
en_CA: Even Row Colour

en: Color to use for even rows
en_CA: Colour to use for even rows

en: Odd Row Color
en_CA: Odd Row Colour

en: Color to use for odd rows
en_CA: Colour to use for odd rows

en: The style of the widget, which contains information about how it will look (colors etc)
en_CA: The style of the widget, which contains information about how it will look (colours etc)

en: Cursor color
en_CA: Cursor colour

en: Color with which to draw insertion cursor
en_CA: Colour with which to draw insertion cursor

en: Secondary cursor color
en_CA: Secondary cursor colour

en: Color with which to draw the secondary insertion cursor when editing mixed right-to-left and left-to-right text
en_CA: Colour with which to draw the secondary insertion cursor when editing mixed right-to-left and left-to-right text

en: Unvisited Link Color
en_CA: Unvisited Link Colour

en: Color of unvisited links
en_CA: Colour of unvisited links

en: Color of visited links
en_CA: Colour of visited links

en: The transient parent of the dialog
en_CA: The transient parent of the dialogue

en: HOME and END keys move to first/last non whitespace characters on line before going to the start/end of the line
en_CA: HOME and END keys move to first/last non-whitespace character on the line before going to the start/end of the line

en: Margin Line Color
en_CA: Margin Line Colour

en: Color to use for the right margin line
en_CA: Colour to use for the right margin line

en: Margin Overlay Color
en_CA: Margin Overlay Colour

en: Color to use for drawing the margin overlay
en_CA: Colour to use for drawing the margin overlay

note: Hexadecimal method of specifying colors. Can either be 3 or 6 in length: #ffcc00 = #fc0.
en: Hexadecimal Color
en_CA: Hexadecimal Colour

note: Pseudo-class rules. Good to have syntax highlighting for these for mistypings.
en: Selector Pseudo Classes
en_CA: Selector Pseudo-Classes

note: Pseudo-element rules. Good to have syntax highlighting for these for mistypings.
en: Selector Pseudo Elements
en_CA: Selector Pseudo-Elements

en: Data Mining Functions
en_CA: Data-Mining Functions

en: Datetime Functions
en_CA: Date/time Functions

en: Tcl
en_CA: TCL

en: Missing main language definition (id = "%s".)
en_CA: Missing main language definition (ID = "%s".)

note: regex_new could fail, for instance if there are different * named sub-patterns with the same name or if resulting regex is * too long. In this case fixing lang file helps (e.g. renaming * subpatterns, making huge keywords use bigger prefixes, etc.)
en: Cannot create a regex for all the transitions, the syntax highlighting process will be slower than usual.
    The error was: %s
en_CA: Cannot create a regex for all the transitions.  The syntax highlighting process will be slower than usual.
    The error was: %s

en: duplicated context id '%s'
en_CA: duplicated context ID '%s'

en: Language id
en_CA: Language ID

en: Unknown id '%s' in regex '%s'
en_CA: Unknown ID '%s' in regex '%s'

en: Line background color
en_CA: Line background colour

en: Whether line background color is set
en_CA: Whether line background colour is set

en: Whether foreground color is set
en_CA: Whether foreground colour is set

en: Whether background color is set
en_CA: Whether background colour is set

en: Scheme ids
en_CA: Scheme IDs

en: List of the ids of the available style schemes
en_CA: List of the IDs of the available style schemes

en: Style scheme id
en_CA: Style scheme ID

en: awk
en_CA: AWK

en: Builtin Function
en_CA: Built-in Function

en: Builtin
en_CA: Built-in

en: Labeled argument
en_CA: Labelled argument

en: Builtin Constant
en_CA: Built-in Constant

en: Builtin Object
en_CA: Built-in Object

en: Classic color scheme
en_CA: Classic colour scheme

en: Color scheme used in the Kate text editor
en_CA: Colour scheme used in the Kate text editor

en: Dark color scheme using the Tango color palette
en_CA: Dark colour scheme using the Tango colour palette

en: Color scheme using Tango color palette
en_CA: Colour scheme using Tango colour palette

en: Can't apply color scheme file `%s'!
en_CA: Can't apply colour scheme file `%s'!

en: _View/_Colorschemes/
en_CA: _View/_Colourschemes/

en: Activate colorscheme %s
en_CA: Activate colourscheme %s

en: Couldn't open '%s': %s
en_CA: Could not open '%s': %s

en: _Colorschemes
en_CA: _Colourschemes

en: Failed opening file '%s': %s
en_CA: Failed to open file '%s': %s

en: Sorry, msginit isn't available on your system!
en_CA: Sorry, msginit is not available on your system!

en: Unknown character, unable to identify.
en_CA: Unknown character; unable to identify.

en: Letter, Titlecase
en_CA: Letter, Title Case

en: gwget application
en_CA: Gwget application

en: gwget automation factory
en_CA: Gwget automation factory

en: <span weight="bold">Behavior</span>
en_CA: <span weight="bold">Behaviour</span>

en: Don't _create directories
en_CA: Do not _create directories

en: kB/sec
en_CA: KB/sec

en: Couldn't open the file
en_CA: Could not open the file

en: Remove this download ?
en_CA: Remove this download?

en: Couldn't open the folder
en_CA: Could not open the folder

en: Can't continue download, existing local file conflicts with remote file
en_CA: Cannot continue download; existing local file conflicts with remote file

en: Can't write to target directory
en_CA: Cannot write to target directory

en: %s has been authorized by Facebook
en_CA: %s has been authorised by Facebook

en: Facebook authorization failed. Please try again.
en_CA: Facebook authorisation failed. Please try again.

en: Start service at login
en_CA: Start service at log-in

en: Authorize with facebook
en_CA: Authorise with Facebook

en: Facebook authorized
en_CA: Facebook authorised

en:   -center                Open the window in the center of the screen
en_CA:   -center                Open the window in the centre of the screen

en:   -fg COLOR              Set message font color
en_CA:   -fg COLOR              Set message font colour

en:   -bg COLOR              Set message background color
en_CA:   -bg COLOR              Set message background colour

en: Auto assigment result
en_CA: Auto assignment result

en: Do you want to delete
    each of the selected transaction ?
en_CA: Do you want to delete
    each of the selected transactions?

en: Quit homebank
en_CA: Quit HomeBank

en: Configure homebank
en_CA: Configure HomeBank

en: Configure the payees
en_CA: Configure the Payees

en: Configure the categories
en_CA: Configure the Categories

en: Open the Statistics report
en_CA: Open the Statistics Report

en: Open the Budget report
en_CA: Open the Budget Report

en: OFX file recognised !
en_CA: OFX file recognized !

en: Unknown/Invalid file...
en_CA: Unknown or Invalid file...

note: file content detail TODO: difficult translation here
en: account: %d - transaction: %d - payee: %d - categorie: %d
en_CA: account: %d - transaction: %d - payee: %d - category: %d

en: The match is done in order: by account, amount and date.
    A date tolerance of 0 day means an exact match
en_CA: The match is done in this order: account, amount and date.
    A date tolerance of 0 day means an exact match

en: View results as list
en_CA: View results as a list

en: <b>Date filter</b>
en_CA: <b>Date Filter</b>

en: View results as pies
en_CA: View results as pie charts

en: Meter:
en_CA: Metre:

note: #-#-#-#-#  147 (homebank)  #-#-#-#-# LST_CAR_DATE, LST_CAR_WORDING, LST_CAR_METER, LST_CAR_FUEL, LST_CAR_PRICE, LST_CAR_AMOUNT, LST_CAR_DIST, LST_CAR_100KM column: Wording column = gtk_tree_view_column_new(); gtk_tree_view_column_set_title(column, _("Wording")); gtk_tree_view_append_column (GTK_TREE
en: Meter
en_CA: Metre

en: <b>Informations</b>
en_CA: <b>Information</b>

en: Autocompletion and direct seizure
    is available for Payee
en_CA: Auto complétion et saisie directe
    disponible pour Tiers

en: The csv file must contains the exact numbers of column,
    separated by a semi-colon, read the help for more details.
en_CA: The CSV file must contain the exact number of columns,

en: Remove a payee ?
en_CA: Remove a payee?

en: <b>Date options</b>
en_CA: <b>Date Options</b>

en: <b>Statistics options</b>
en_CA: <b>Statistical Options</b>

en: <b>Budget options</b>
en_CA: <b>Budget Options</b>

en: <b>Numbers format</b>
en_CA: <b>Numbers Format</b>

en: <b>Numbers options</b>
en_CA: <b>Numbers Options</b>

en: <b>Measurement units</b>
en_CA: <b>Measurement Units</b>

en: <b>Amount colors</b>
en_CA: <b>Amount Colours</b>

en: Uses custom colors
en_CA: Uses custom colours

en: Secure Shell
en_CA: Secure Shell, Eh?

en: Invert colors
en_CA: Invert colours

note: ../themes/mxflat/theme.jl ../themes/mono/theme.jl
en: center
en_CA: centre

en: Color Matrix
en_CA: Colour Matrix

en: Millimeter
en_CA: Millimetre

en: Centimeter
en_CA: Centimetre

en: Item behavior
en_CA: Item behaviour

en: General behavior for the dock item (i.e. whether it can float, if it's locked, etc.)
en_CA: General behaviour for the dock item (i.e. whether it can float, if it's locked, etc.)

note: UnLock menuitem
en: UnLock
en_CA: Unlock

en: Page border color
en_CA: Page border colour

en: Guideline color
en_CA: Guideline colour

en: Highlighted guideline color
en_CA: Highlighted guideline colour

en: The Bonobo Activation configuration file was not read successfully. Please, check it is valid in: %s
en_CA: The Bonobo Activation configuration file was not read successfully. Please check it is valid in: %s

en: iid %s has a NULL type
en_CA: IID %s has a NULL type

en: iid %s has a NULL location
en_CA: IID %s has a NULL location

en: invalid character '%c' in iid '%s'
en_CA: invalid character '%c' in IID '%s'

en: Couldn't spawn a new process
en_CA: Could not spawn a new process

en: No permission to do operation on storage
en_CA: No permission to perform operation on storage

en: Failed to resolve, or extend '%s
en_CA: Failed to resolve or extend '%s

en: I could not initialize Bonobo
en_CA: Could not initialize Bonobo

en: An exception occurred '%s'
en_CA: An exception occured '%s'

en: Please, make sure you have permissions to write to '%s'.
en_CA: Make sure you have permission to write to '%s'.

en: corba factory
en_CA: CORBA factory

en: corba UI container
en_CA: CORBA UI container

en: Don't use X shared memory extension
en_CA: Do not use X shared memory extension

note: Warn and put in defaults
en: couldn't read gpg configuration, will try to create
en_CA: Could not read GPG configuration; will try to create

en: couldn't modify gpg configuration: %s
en_CA: Could not modify GPG configuration: %s

en: couldn't fork process
en_CA: could not fork process

en: couldn't create new process group
en_CA: could not create new process group

en: couldn't drop privileges properly
en_CA: could not drop privileges properly

en: Couldn't share keys
en_CA: Could not share keys

en: Can't publish discovery information on the network.
en_CA: Cannot publish discovery information on the network.

en: Enables displaying of decrypted text in a separate window after selecting the decrypt option.
en_CA: Enables display of decrypted text in a separate window after selecting the decrypt option.

en: Enables displaying of encrypted text in a separate window after selecting the decrypt option.
en_CA: Enables display of encrypted text in a separate window after selecting the decrypt option.

en: Enables displaying of signed text in a separate window after selecting the decrypt option.
en_CA: Enables display of signed text in a separate window after selecting the decrypt option.

en: If set to true, then files encrypted with seahorse will be ASCII armor encoded.
en_CA: If set to true, then files encrypted with seahorse will be ASCII armour encoded.

en: Specify the column to sort the recipients window by. Columns are: 'name', 'id' and 'validity', Put a '-' in front of the column name to sort in descending order.
en_CA: Specify the column to sort the recipients window by. Columns are: 'name', 'id', and 'validity'. Put a '-' in front of the column name to sort in descending order.

en: The keyserver to publish PGP keys to. Or empty to suppress publishing of PGP keys.
en_CA: The keyserver to publish PGP keys to, Or empty to suppress publishing of PGP keys.

en: The last keyserver a search was performed against or empty for all keyservers.
en_CA: The last keyserver a search was performed against, or empty for all keyservers.

en: This specifies the default key to use for certain operations, mainly signing.
en_CA: This specifies the default key to use for certain operations (mainly signing).

en: When set seahorse-agent expires GPG passwords in it's cache after a peried of time.
en_CA: When set, seahorse-agent expires GPG passwords in its cache after a peried of time.

en: Whether to use ASCII Armor
en_CA: Whether to use ASCII Armour

en: Couldn't communicate with '%s': %s
en_CA: Could not communicate with '%s': %s

en: Searching for key id '%s'...
en_CA: Searching for key ID '%s'...

en: Couldn't open the Session Properties
en_CA: Could not open the Session Properties

en: Couldn't start the 'seahorse-daemon' program
en_CA: Could not start the 'seahorse-daemon' program

en: Another passphrase caching agent is running. Disabling cache preferences.
en_CA: Another passphrase-caching agent is running. Disabling cache preferences.

en: None: Don't publish keys
en_CA: None: Do not publish keys

en: _Armor Encode Files
en_CA: _Armour Encode Files

en: <b>Note:</b> The 'seahorse-daemon' program was started. This program is necessary in order for caching of passphrases.
en_CA: <b>Note:</b> The 'seahorse-daemon' program was started. This program is necessary for caching of passphrases.

en: <b>Warning:</b> The 'seahorse-daemon' program is not running. This program is necessary in order for caching of passphrases.
en_CA: <b>Warning:</b> The 'seahorse-daemon' program is not running. This program is necessary for caching of passphrases.

en: Sharing your keys allows other people on your network to use the keys you've collected. This means they can automatically encrypt things for you or those you know, without you having to send them your key.
    
    <b>Note:</b> Your personal keys will not be compromised.
en_CA: Sharing your keys allows other people on your network to use the keys you have collected. This means they can automatically encrypt things for you or those you know, without you having to send them your key.
    
    <b>Note:</b> Your personal keys will not be compromised.

en: To avoid manually starting the 'seahorse-agent' in the future add
    it to the Session manager.
en_CA: To avoid manually starting 'seahorse-agent' in the future, add
    it to the Session manager.

en: None (Don't sign)
en_CA: None (Do not sign)

en: Couldn't verify signature.
en_CA: Could not verify signature.

en: Couldn't run file-roller
en_CA: Could not run file-roller

en: Couldn't package files
en_CA: Could not package files

en: Couldn't set permissions on backup file.
en_CA: Could not set permissions on backup file.

en: Use PGP/GPG to encrypt/decrypt/sign/verify/import the clipboard.panel.
en_CA: Use PGP/GPG to encrypt/decrypt/sign/verify/import the clipboard.

en: Couldn't encrypt text
en_CA: Could not encrypt text

en: Couldn't sign text
en_CA: Could not sign text

en: Couldn't import keys
en_CA: Could not import keys

en: Couldn't decrypt text
en_CA: Could not decrypt text

en: Encrypt (and optionally sign) the selected file | Encrypt the selected files
en_CA[0]: Encrypt (and optionally sign) the selected file
en_CA[1]: Encrypt (and optionally sign) the selected files

en: Read list of URIs on standard in
en_CA: Read list of URIs on standard input

en: Couldn't import keys from "%s"
en_CA: Could not import keys from "%s"

en: Couldn't encrypt "%s"
en_CA: Could not encrypt "%s"

en: Couldn't sign "%s"
en_CA: Could not sign "%s"

en: Couldn't decrypt "%s"
en_CA: Could not decrypt "%s"

en: Couldn't verify "%s"
en_CA: Could not verify "%s"

en: Couldn't add subkey
en_CA: Could not add subkey

en: Couldn't add user id
en_CA: Could not add user ID

en: Couldn't delete key
en_CA: Could not delete key

en: Couldn't delete subkey
en_CA: Could not delete subkey

en: Couldn't delete user id
en_CA: Could not delete user ID

en: Couldn't change expiry date
en_CA: Couldn't change expiration date

en: Expiry for Subkey %d of %s
en_CA: Expiration for Subkey %d of %s

en: Expiry for %s
en_CA: Expiration for %s

en: Couldn't generate key
en_CA: Could not generate key

en: Choosing a passphrase is an integral part of creating a strong key. Like a password, a passphrase should contain letters, numbers, and punctuation. Additionally, a passphrase can contain spaces, meaning it can contain many words. 
    
    You should pick a phrase that is easy to rememeber and contains punctuation. Take this phrase, adjust the case of various letters, and change some of the letters into numbers or punctuation, reminiscent of "leet speak", but don't make it so obscure to the point where you can't remember it.
en_CA: Choosing a passphrase is an integral part of creating a strong key. Like a password, a passphrase should contain letters, numbers, and punctuation. Additionally, a passphrase can contain spaces, meaning it can contain many words. 
    
    You should pick a phrase that is easy to rememeber and contains punctuation. Take this phrase, adjust the case of various letters, and change some of the letters into numbers or punctuation, reminiscent of "leet speak", but don't make it so obscure rhar you cannot remember it.

en: Keys must be given an appropriate expiration date. For most people, the default option of "never expires" is sufficient. If you only plan on using the key for a certain period of time, i.e. for a specific project, you should pick an expiration date after the projected completion of your project. After the expiration date, your private key will still be able to decrypt messages or data encrypted with your public key. However, your private key will no longer sign messages or data.
en_CA: Keys must be given an appropriate expiration date. For most people, the default option of "never expires" is sufficient. If you plan on using the key for only a certain period of time, i.e. for a specific project, you should pick an expiration date after the projected completion of your project. After the expiration date, your private key will still be able to decrypt messages or data encrypted with your public key. However, your private key will no longer sign messages or data.

en: To create a key and tie it to your identity, the following information is needed: Full Name, Email Address, and Comment.  
    
    These values will be given to the name of your key in the following manner:                              
    
    Full Name (Comment) <email address>.
en_CA: To create a key and tie it to your identity, the following information is needed: Full Name, Email Address, and Comment.  
    
    These values will be given to the name of your key in the following manner:
    
    Full Name (Comment) <email address>.

en: Generate a key via the assistant.
en_CA: Generate a key using the assistant.

en: Generate a key with the advanced dialog.
en_CA: Generate a key with the advanced dialogue.

en: Couldn't retrieve key data
en_CA: Could not retrieve key data

en: Couldn't import keys from clipboard
en_CA: Could not import keys from clipboard

en: Couldn't export key to clipboard
en_CA: Could not export key to clipboard

en: Couldn't export key to "%s"
en_CA: Could not export key to "%s"

en: Couldn't import key from "%s"
en_CA: Could not import key from "%s"

en: To get started with encryption you'll need keys.
en_CA: To get started with encryption, you will need keys.

en: Couldn't change primary user ID
en_CA: Could not change primary user ID

note: TODO: We really shouldn't be getting here. We should rerender the photo into a format that will work (along with resizing).
en: Couldn't add photo
en_CA: Could not add photo

en: Couldn't delete photo
en_CA: Could not delete photo

en: Couldn't change primary photo ID
en_CA: Could not change primary photo ID

en: I use this key to sign legal 
    documents and school docs 
    that I need to sign
en_CA: I use this key to sign legal 
    and school documents

en: Couldn't retrieve key data from key server
en_CA: Could not retrieve key data from key server

en: Couldn't import keys into keyring
en_CA: Could not import keys into keyring

en: Couldn't publish keys to server: %s
en_CA: Could not publish keys to server: %s

en: Couldn't retrieve keys from server: %s
en_CA: Could not retrieve keys from server: %s

en: Couldn't export keys
en_CA: Could not export keys

en: Because the files are located remotely, each file will be encrypted seperately.
en_CA: Because the files are remotely located, each file will be encrypted separately.

en: Encrypt each file seperately
en_CA: Encrypt each file separately

en: Encrypt packed together in a package
en_CA: Encrypt all files together in a package

en: Couldn't revoke subkey
en_CA: Could not revoke subkey

en: Couldn't add revoker
en_CA: Could not add revoker

en: Couldn't sign key
en_CA: Could not sign key

en: If signature is local to the key ring and won't be exported with the key
en_CA: If signature is local to the key ring and should not be exported with the key

en: Couldn't change passhrase for SSH key.
en_CA: Could not change passhrase for SSH key.

en: Couldn't configure SSH keys on remote computer.
en_CA: Could not configure SSH keys on remote computer.

en: This will configure another computer to allow use your SSH key when you log into it.
    
    The computer in question must be running SSH, and you must already have an login account on it.
en_CA: This will configure another computer to allow use of your SSH key when you log into it.
    
    The computer in question must be running SSH, and you must already have an login account on it.

en: My colors
en_CA: My colours

en: Color accent
en_CA: Colour accent

en: Color swap
en_CA: Colour swap

en: 2x
en_CA: 2×

en: 4x
en_CA: 4×

en: Center-weighted average
en_CA: Centre-weighted average

en: Canon MP-E 65mm f/2.8 1-5x Macro Photo
en_CA: Canon MP-E 65mm f/2.8 1-5× Macro Photo

en: My color data
en_CA: My colour data

en: Center-right
en_CA: Centre-right

en: Left-center
en_CA: Left-centre

en: 2x2 matrix (clockwise)
en_CA: 2×2 matrix (clockwise)

en: Color Information
en_CA: Colour Information

en: Color Tone
en_CA: Colour Tone

en: One-chip color area sensor
en_CA: One-chip colour area sensor

en: Two-chip color area sensor
en_CA: Two-chip colour area sensor

en: Three-chip color area sensor
en_CA: Three-chip colour area sensor

en: Color sequential area sensor
en_CA: Colour sequential area sensor

en: Color sequential linear sensor
en_CA: Colour sequential linear sensor

en: Center-weight
en_CA: Centre-weight

en:  (%.02f cd/m^2)
en_CA:  (%.02f cd/m²)

en: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GSPAltitude tag. The reference unit is meters. Note that this tag is BYTE type, unlike other reference tags.
en_CA: Indicates the altitude used as the reference altitude. If the reference is sea level and the altitude is above sea level, 0 is given. If the altitude is below sea level, a value of 1 is given and the altitude is indicated as an absolute value in the GSPAltitude tag. The reference unit is metres. Note that this tag is BYTE type, unlike other reference tags.

en: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is meters.
en_CA: Indicates the altitude based on the reference in GPSAltitudeRef. Altitude is expressed as one RATIONAL value. The reference unit is metres.

en: Indicates the unit used to express the GPS receiver speed of movement. 'K', 'M' and 'N' represent kilometers per hour, miles per hour, and knots.
en_CA: Indicates the unit used to express the GPS receiver speed of movement. 'K' 'M' and 'N' represent kilometres per hour, miles per hour, and knots.

en: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometers, miles and nautical miles.
en_CA: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometres, miles and nautical miles.

en: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_CA: A transfer function for the image, described in tabular style. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the white point of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_CA: The chromaticity of the white point of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The chromaticity of the three primary colors of the image. Normally this tag is not necessary, since color space is specified in the color space information tag (<ColorSpace>).
en_CA: The chromaticity of the three primary colours of the image. Normally this tag is not necessary, since colour space is specified in the colour space information tag (<ColorSpace>).

en: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Color Space Guidelines", is used as the default. The color space is declared in a color space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.
en_CA: The matrix coefficients for transformation from RGB to YCbCr image data. No default is given in TIFF; but here the value given in "Color Space Guidelines", is used as the default. The colour space is declared in a colour space information tag, with the default being the value that gives the optimal image characteristics Interoperability this condition.

en: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centered); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centered) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centered and co-sited positioning.
en_CA: The position of chrominance components in relation to the luminance component. This field is designated only for JPEG compressed data or uncompressed YCbCr data. The TIFF default is 1 (centred); but when Y:Cb:Cr = 4:2:2 it is recommended in this standard that 2 (co-sited) be used to record data, in order to improve the image quality when viewed on TV systems. When this field does not exist, the reader shall assume the TIFF default. In the case of Y:Cb:Cr = 4:2:0, the TIFF default (centred) is recommended. If the reader does not have the capability of supporting both kinds of <YCbCrPositioning>, it shall follow the TIFF default regardless of the value in this field. It is preferable that readers be able to support both centred and co-sited positioning.

en: The color space information tag is always recorded as the color space specifier. Normally sRGB (=1) is used to define the color space based on the PC monitor conditions and environment. If a color space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.
en_CA: The colour space information tag is always recorded as the colour space specifier. Normally sRGB (=1) is used to define the colour space based on the PC monitor conditions and environment. If a colour space other than sRGB is used, Uncalibrated (=FFFF.H) is set. Image data recorded as Uncalibrated can be treated as sRGB when it is converted to FlashPix.

en: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the center of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.
en_CA: Indicates the location of the main subject in the scene. The value of this tag represents the pixel at the centre of the main subject relative to the left edge, prior to rotation processing as per the <Rotation> tag. The first value indicates the X column number and the second indicates the Y row number.

en: FinePix Color
en_CA: FinePix Colour

en: %2.2f meters
en_CA: %2.2f metres

en: AF position: center
en_CA: AF position: centre

en: Color Mode (?)
en_CA: Colour Mode (?)

en: Color Matrix Number
en_CA: Colour Matrix Number

en: Color Control
en_CA: Colour Control

en: Light Value Center
en_CA: Light Value Centre

en: Color Adjustment Mode
en_CA: Colour Adjustment Mode

en: 2560x1920 or 2304x1728
en_CA: 2560×1920 or 2304×1728

en: 2304x1728 or 2592x1944
en_CA: 2304×1728 or 2592×1944

en: 2816x2212 or 2816x2112
en_CA: 2816×2212 or 2816×2112

en: Fixed center
en_CA: Fixed centre

en: Top-center
en_CA: Top-centre

en: Bottom-center
en_CA: Bottom-centre

en: 3008x2008 or 3040x2024
en_CA: 3008×2008 or 3040×2024

en: Distance of photographed object in millimeters.
en_CA: Distance of photographed object in millimetres.

en: Can't open connection to DSN %s: %s
en_CA: Cannot open connection to DSN %s: %s

en: Can't initialize bonobo!
en_CA: Cannot initialize bonobo!

en: Question dialog
en_CA: Question dialogue

en: Error showing url: %s
en_CA: Error showing URL: %s

en: GNOME to start preferred Mobility assistive technology application during login
en_CA: Whether GNOME should start preferred Mobility assistive technology application during login

en: GNOME to start preferred Visual assistive technology application during login
en_CA: Whether GNOME should start preferred Visual assistive technology application during login

en: Fallback window manager if user window manager can't be found. This key has been deprecated since GNOME 2.12.
en_CA: Fallback window manager if user's window manager cannot be found. This key has been deprecated since GNOME 2.12.

en: Color Shading Type
en_CA: Colour Shading Type

en: How to shade the background color. Possible values are "horizontal-gradient", "vertical-gradient", and "solid"
en_CA: How to shade the background colour. Possible values are "horizontal-gradient", "vertical-gradient", and "solid"

en: Left or Top color when drawing gradients, or the solid color.
en_CA: Left or Top colour when drawing gradients, or the solid colour.

en: Primary Color
en_CA: Primary Colour

en: Right or Bottom color when drawing gradients, not used for solid color.
en_CA: Right or Bottom colour when drawing gradients, not used for solid colour.

en: Secondary Color
en_CA: Secondary Colour

en: Prevent the user from accessing the terminal or specifying a command line to be executed. For example, this would disable access to the panel's "Run Application" dialog.
en_CA: Prevent the user from accessing the terminal or specifying a command line to be executed. For example, this would disable access to the panel's "Run Application" dialogue.

en: Prevent the user from modifying print settings. For example, this would disable access to all applications' "Print Setup" dialogs.
en_CA: Prevent the user from modifying print settings. For example, this would disable access to all applications' "Print Setup" dialogues.

en: Prevent the user from printing. For example, this would disable access to all applications' "Print" dialogs.
en_CA: Prevent the user from printing. For example, this would disable access to all applications' "Print" dialogues.

en: Prevent the user from saving files to disk. For example, this would disable access to all applications' "Save as" dialogs.
en_CA: Prevent the user from saving files to disk. For example, this would disable access to all applications' "Save as" dialogues.

en: Prevent the user to lock his screen.
en_CA: Prevent the user from locking his screen.

en: Font name of the cursor. If unset, the default font is used. This value is only propagated to the X server start of each session, so changing it mid-session won't have an effect until the next time you log in.
en_CA: Font name of the cursor. If unset, the default font is used. This value is only propagated to the X server start of each session, so changing it mid-session will not have an effect until the next time you log in.

en: Text color, as string
en_CA: Text colour, as string

en: Text color, as a GdkColor
en_CA: Text colour, as a GdkColour

en: Text color, as an R/G/B/A combined integer
en_CA: Text colour, as an R/G/B/A combined integer

en: Success, some attributes were ignored
en_CA: Success; some attributes were ignored

en: Success, some attributes conflicted
en_CA: Success; some attributes conflicted

en: Success, ignored subscriptions
en_CA: Success; ignored subscriptions

en: Success, ignored notifications
en_CA: Success; ignored notifications

en: Success, too many events
en_CA: Success; too many events

en: Success, cancel subscription
en_CA: Success; cancel subscription

en: The value or attributes in this request are not supported
en_CA: The values or attributes in this request are not supported

en: The job has been canceled
en_CA: The job has been cancelled

note: Set up the dialog
en: Gnome Print Dialog
en_CA: Gnome Print Dialogue

en: Use _theme colors for content
en_CA: Use _theme colours for content

en: Foreground color of the title
en_CA: Foreground colour of the title

en: Foreground color of the title as a GdkColor
en_CA: Foreground colour of the title as a GdkColor

en: Title Foreground color set
en_CA: Title Foreground colour set

en: Foreground color of the title is set
en_CA: Foreground colour of the title is set

en: Background color set
en_CA: Background colour set

en: Background color is set
en_CA: Background colour is set

en: Contents Background color
en_CA: Contents Background colour

en: Contents Background color as a GdkColor
en_CA: Contents Background colour as a GdkColor

en: Contents Background color set
en_CA: Contents Background colour set

en: Contents Background color is set
en_CA: Contents Background colour is set

en: Logo Background color
en_CA: Logo Background colour

en: Logo Background color as a GdkColor
en_CA: Logo Background colour as a GdkColor

en: Logo Background color set
en_CA: Logo Background colour set

en: Logo Background color is set
en_CA: Logo Background colour is set

en: Browse Dialog Title
en_CA: Browse Dialogue Title

en: Title for the Browse file dialog.
en_CA: Title for the Browse file dialogue.

en: Color used to draw the link
en_CA: Colour used to draw the link

en: An error has occurred while trying to launch the default web browser.
    Please check your settings in the 'Preferred Applications' preference tool.
en_CA: An error occurred while trying to launch the default web browser.
    Please check your settings in the 'Preferred Applications' preference tool.

en: Title for the Browse icon dialog.
en_CA: Title for the Browse icon dialogue.

en: Picker dialog
en_CA: Picker dialogue

en: Icon picker dialog.  You can use this property to get the GtkDialog if you need to modify or query any of its properties.
en_CA: Icon picker dialogue.  You can use this property to get the GtkDialog if you need to modify or query any of its properties.

en: Icon selection dialog
en_CA: Icon selection dialogue

en: This dialog box lets you select an icon.
en_CA: This dialogue box lets you select an icon.

en: GnomeIconSelection: couldn't open directory '%s'
en_CA: GnomeIconSelection: could not open directory '%s'

en: _Remember password until you logout
en_CA: _Remember password until you log out

en: Can't find an hbox, using a normal file selection
en_CA: Cannot find an hbox, using a normal file selection

en: Disable Crash Dialog
en_CA: Disable Crash Dialogue

en: Background read from tty
en_CA: Background read from TTY

en: Background write to tty
en_CA: Background write to TTY

note: TRANSLATOR: Change this to the default location name, * used when you first start the Weather Applet. This is * the common localised name that corresponds to * the location code (DEFAULT_CODE) you will put on the next message * For example, for the Greek locale, we set this to "Athens", the * capita
en: DEFAULT_LOCATION
en_CA: Ottawa

note: TRANSLATOR: Change this to the code of your default location that * corresponds to the DEFAULT_LOCATION name you put above. This is * normally a four-letter (ICAO) code and can be found in * http://svn.gnome.org/viewvc/libgweather/trunk/data/Locations.xml.in?view=markup * NB. The web page is over 1.
en: DEFAULT_CODE
en_CA: CYOW

note: TRANSLATOR: Change this to the zone of your default location that * corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put above. * Normally, US and Canada locations have zones while the rest do not. * Check * http://svn.gnome.org/viewvc/libgweather/trunk/data/Locations.xml.in?view=markup * as
en: DEFAULT_ZONE
en_CA: -----

note: TRANSLATOR: Change this to the radar of your default location that * corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put above. * Normally, US and Canada locations have radar names while the rest do * not. Check * http://svn.gnome.org/viewvc/libgweather/trunk/data/Locations.xml.in?view=mark
en: DEFAULT_RADAR
en_CA: tyx

note: TRANSLATOR: Change this to the coordinates of your default location * that corresponds to the DEFAULT_LOCATION and DEFAULT_CODE you put * above. Check * http://svn.gnome.org/viewvc/libgweather/trunk/data/Locations.xml.in?view=markup * as any coordinates you put here must also be present in the * Loc
en: DEFAULT_COORDINATES
en_CA: 45-19N 075-40W

note: TRANSLATOR: This is the default unit to use for temperature measurements. Valid values are: "K" (Kelvin), "C" (Celsius) and "F" (Fahrenheit)
en: DEFAULT_TEMP_UNIT
en_CA: C

note: TRANSLATOR: This is the default unit to use for wind speed. Valid values are: "m/s" (meters per second), "km/h" (kilometers per hour), "mph" (miles per hour) and "knots"
en: DEFAULT_SPEED_UNIT
en_CA: km/h

note: TRANSLATOR: This is the default unit to use for atmospheric pressure. Valid values are: "kPa" (kiloPascals), "hPa" (hectoPascals), "mb" (millibars), "mmHg" (millimeters of mercury), "inHg" (inches of mercury) and "atm" (atmosphere)
en: DEFAULT_PRESSURE_UNIT
en_CA: kPa

note: TRANSLATOR: This is the default unit to use for visibility distance. Valid values are: "m" (meters), "km" (kilometers) and "mi" (miles)
en: DEFAULT_DISTANCE_UNIT
en_CA: km

en: The unit to use for pressure.
en_CA: The units to use for pressure.

en: The unit to use for temperature.
en_CA: The units to use for temperature.

en: The unit to use for visibility.
en_CA: The units to use for visibility.

en: The unit to use for wind speed.
en_CA: The units to use for wind speed.

en: Url for the radar map
en_CA: URL for the radar map

en: Use custom url for the radar map
en_CA: Use custom URL for the radar map

en: Use metric units instead of english units.
en_CA: Use metric units instead of English units.

en: East - Southeast
en_CA: East - SouthEast

en: South - Southeast
en_CA: South - SouthEast

en: South - Southwest
en_CA: South - SouthWest

en: West - Southwest
en_CA: West - SouthWest

en: West - Northwest
en_CA: West - NorthWest

en: North - Northwest
en_CA: North - NorthWest

note: TRANSLATOR: this is a format string for strftime *             see `man 3 strftime` for more details
en: %a, %b %d / %H:%M
en_CA: %a, %d %b / %H:%M

en: Chitose Japanese Air Self Defense Force
en_CA: Chitose Japanese Air Self Defence Force

en: Makedonia
en_CA: Macedonia

note: Translators: This is in Calvi in France.
en: Sainte Catherine
en_CA: St. Catherine

en: Tokachi Japanese Ground Self Defense Force
en_CA: Tokachi Japanese Ground Self Defence Force

en: Fail to set volume
en_CA: Failed to set volume

en: play or pause current playing media
en_CA: play or pause currently playing media

en: show current playing song
en_CA: show currently playing song

en: show information about supported audio file
en_CA: show information about supported audio files

en: No playing song
en_CA: No song playing

en:  doesn't have enough permission
en_CA:  doesn't have permission

en: Error while writting
en_CA: Error while writing

en: _Get file informations
en_CA: _ Get file information

en: _New Web Radio
en_CA: _ New Web Radio Station

en: _Add to favorite
en_CA: _Add to favourites

en: Edit Web Radio
en_CA: Edit Web Radio Details

en: Visible column
en_CA: Visible columns

en: Favorite albums
en_CA: Favourite albums

en: Favorite songs
en_CA: Favourite songs

en: Favorite songs of
en_CA: Favourite songs by

en: Last played songs of
en_CA: Last played songs by

en: iPod Property
en_CA: iPod Properties

en: See album information at www.last.fm
en_CA: See album information from Last.fm

en: See artist information at www.last.fm
en_CA: See artist information from Last.fm

en: Fetching informations
en_CA: Fetching information

en: LastFm
en_CA: Last.fm

en: Download missing cover
en_CA: Download missing covers

en: Download cover...
en_CA: Downloading covers...

en: Change Lyrics Server
en_CA: Change lyrics server

en: Download feed...
en_CA: Downloading feed...

en: Download podcasts...
en_CA: Downloading podcasts...

en: Download podcasts
en_CA: Downloading podcasts

en: Edit web radio
en_CA: Edit web radio details

en: New web radio
en_CA: New web radio station

en: Web radio name and url :
en_CA: Web radio name and url:

en: Categorie
en_CA: Category

en: Webradio
en_CA: Web radio

en: See in web browser
en_CA: View in web browser

en: Change wikipedia language
en_CA: Change Wikipedia language

en: Invalid action
en_CA: [Invalid Encoding]

en: Invalid action target
en_CA: [Invalid Encoding]

en: Search an album cover
en_CA: Search for an album cover

en: From Amazon
en_CA: From Amazon.com

en: From Google Image
en_CA: From Google Images

en: Import a folder in the library
en_CA: Import a folder to library

en: Import a file in the library
en_CA: Import a file to library

en: Podcast feed url :
en_CA: Podcast feed url:

en: Remove played track
en_CA: Remove played tracks

en: Played track to show:
en_CA: Played tracks to show:

en: Upcoming track:
en_CA: Upcoming tracks:

en: Track to append:
en_CA: Tracks to append:

en: No playing
en_CA: No playing tracks

en: No Playing
en_CA: No Tracks Playing

en: Text color #1:
en_CA: Text colour #1:

en: Text color #2:
en_CA: Text colour #2:

en: Panel color:
en_CA: Panel colour:

en: Panel border color:
en_CA: Panel border colour:

en: Center vertically
en_CA: Centre vertically

en: Enable osd
en_CA: Enable OSD

en: Font & colors
en_CA: Font & colours

en: Current playling
en_CA: Currently playing

en: Enable trayicon
en_CA: Enable tray icon

en: Close to systray
en_CA: Close to system tray

en: Note: password will be  hidden when window have been closed
en_CA: Note: password will be hidden after closing window

en: Watch my library for added/changed/deleted files
en_CA: Watch my library for added, changed, or deleted files

en: Check my library for added/changed files on startup
en_CA: Check my library for added or changed files on startup

en: Skipped words for the web service queries
en_CA: Skipped words for web service queries

en: does not contains
en_CA: does not contain

en: Set all Track Number Automaticaly
en_CA: Automatically number tracks

en: Fetch informations for all track
en_CA: Fetch information for all tracks

en: Can't write metadata for:
en_CA: Error writing metadata for:

note: This text comes from http://www.jamendo.com/en/static/concept/ and was already translated in many languages. You should take a look on this site and check if you can't reuse it.
en:      * A legal framework protecting the artists (thanks to the Creative Commons licenses).
en_CA:      * A legal framework protecting the artists (thanks to the Creative Commons licences).

en:     * Downloads and CDs are both available (no other site on the internet sells both)
en_CA:     * Downloads and CDs are both available (no other site on the Internet sells both)

en:     * Full color, high quality cover art PDF available for most albums - easy to print
en_CA:     * Full colour, high quality cover art PDF available for most albums - easy to print

en: Fetch informations
en_CA: Fetch information

en: No radio found
en_CA: Cannot find Web Radio Station

en: There was an error launching the keyboard preferences dialog: %s
en_CA: There was an error launching the keyboard preferences dialogue: %s

en: Shows the status of keyboard accessibility features
en_CA: See the status of keyboard accessibility features

en: Monitor a laptop's remaining power
en_CA: Monitor your battery's remaining power

en: Show the horizontal battery
en_CA: Show the battery horizontally

en: Insert characters
en_CA: Character Palette

en: Mode to show cpu usage
en_CA: Mode to show CPU usage

en: A 0 value means to show the applet in graphic mode (pixmap only), 1 to show the applet in text mode (not to show the pixmap) and 2 to show the applet in graphic and text mode.
en_CA: A 0 value means to show the applet in graphic mode (pixmap only), 1 to show the applet in text mode (not to show the pixmap), and 2 to show the applet in graphic and text mode.

en: A 0 value means to show cpu frequency, 1 to show frequency and units, and 2 to show percentage instead of frequency.
en_CA: A 0 value means to show CPU frequency, 1 to show frequency and units, and 2 to show percentage instead of frequency.

en: You will not be able to modify the frequency of your machine.  Your machine may be misconfigured or not have hardware support for CPU frequency scaling.
en_CA: You will not be able to modify the frequency of your machine.  Your machine may be misconfigured or may not have hardware support for CPU frequency scaling.

en: Mount local disks and devices
en_CA: Mount local disks and devices from the panel

note: TRANSLATOR: The distance unit "meters"
en: meters
en_CA: metres

en: Monitor the current weather conditions, and forecasts
en_CA: Monitor current weather conditions and forecasts

en: _Use default theme colors
en_CA: _Use default theme colours

en: Use the default theme colors
en_CA: Use the default theme colours

en: Use theme colors instead of custom ones.
en_CA: Use theme colours instead of custom ones.

en: Foreground color, red component
en_CA: Foreground colour, red component

en: The red component of the foreground color.
en_CA: The red component of the foreground colour.

en: Foreground color, green component
en_CA: Foreground colour, green component

en: The green component of the foreground color.
en_CA: The green component of the foreground colour.

en: Foreground color, blue component
en_CA: Foreground colour, blue component

en: The blue component of the foreground color.
en_CA: The blue component of the foreground colour.

en: Background color, red component
en_CA: Background colour, red component

en: The red component of the background color.
en_CA: The red component of the background colour.

en: Background color, green component
en_CA: Background colour, green component

en: The green component of the background color.
en_CA: The green component of the background colour.

en: Background color, blue component
en_CA: Background colour, blue component

en: The blue component of the background color.
en_CA: The blue component of the background colour.

en: The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.
en_CA: The volume control did not find any elements and/or devices to control. This means either that you do not have the right GStreamer plugins installed, or that you do not have a sound card configured.

en: Check that you have typed it correctly and that you haven't activated the "caps lock" key
en_CA: Check that you have typed it correctly and that you the "Caps Lock" key is not on

en: Check that it's installed in the correct path and that it has the correct permissions
en_CA: Check that it is installed in the correct path and that it has the correct permissions

en: A system load monitor capable of displaying graphs for CPU, ram, and swap space use, plus network traffic.
en_CA: A system load monitor capable of displaying graphs for CPU, RAM, and swap space usage, plus network traffic.

en: Graph color for user-related CPU activity
en_CA: Graph colour for user-related CPU activity

en: Graph color for system-related CPU activity
en_CA: Graph colour for system-related CPU activity

en: Graph color for nice-related CPU activity
en_CA: Graph colour for nice-related CPU activity

en: Graph color for iowait related CPU activity
en_CA: Graph colour for iowait-related CPU activity

en: CPU graph background color
en_CA: CPU graph background colour

en: Graph color for user-related memory usage
en_CA: Graph colour for user-related memory usage

en: Graph color for shared memory
en_CA: Graph colour for shared memory

en: Graph color for buffer memory
en_CA: Graph colour for buffer memory

en: Graph color for cached memory
en_CA: Graph colour for cached memory

en: Memory graph background color
en_CA: Memory graph background colour

en: Network graph background color
en_CA: Network graph background colour

en: Graph color for user-related swap usage
en_CA: Graph colour for user-related swap usage

en: Swap graph background color
en_CA: Swap graph background colour

en: Graph color for load average
en_CA: Graph colour for load average

en: Load graph background color
en_CA: Load graph background colour

en: Graph color for disk read
en_CA: Graph colour for disk read

en: Graph color for disk write
en_CA: Graph colour for disk write

en: Background color for disk load graph
en_CA: Background colour for disk load graph

en: _Harddisk
en_CA: _Hard Disk

en: Harddisk
en_CA: Hard disk

en: Tomboy (ne Stickynotes)
en_CA: Tomboy (Stickynotes)

en: Choose a base color to use for all sticky notes
en_CA: Choose a base colour to use for all sticky notes

en: Pick a default sticky note color
en_CA: Pick a default sticky note colour

en: Use co_lor from the system theme
en_CA: Use co_lour from the system theme

en: Force _default color and font on notes
en_CA: Force _default colour and font on notes

en: Choose a color for the note
en_CA: Choose a colour for the note

en: Pick a color for the sticky note
en_CA: Pick a colour for the sticky note

en: Use default co_lor
en_CA: Use default co_lour

en: Default color for new notes
en_CA: Default colour for new notes

en: Default color for new sticky notes. This should be in html hex specification, for example "#30FF50".
en_CA: Default colour for new sticky notes. This should be in html hex specification, for example "#30FF50".

en: Default color for font
en_CA: Default colour for font

en: Default font color for new sticky notes. This should be in html hex specification, for example "#000000".
en_CA: Default font colour for new sticky notes. This should be in HTML hex specification, for example "#000000".

en: Whether to use the default system color
en_CA: Whether to use the default system colour

en: If this option is disabled, a custom color can be used as the default color for all sticky notes.
en_CA: If this option is disabled, a custom colour can be used as the default colour for all sticky notes.

en: Whether to force the default color and font on all notes
en_CA: Whether to force the default colour and font on all notes

en: If this option is enabled, the custom colors and fonts that have been assigned to individual notes will be ignored.
en_CA: If this option is enabled, the custom colours and fonts that have been assigned to individual notes will be ignored.

en: Cannot move items to trash, do you want to delete them immediately?
en_CA: Cannot move items to trash. Do you want to delete them immediately?

en: Cannot move some items to trash, do you want to delete these immediately?
en_CA: Cannot move some items to trash. Do you want to delete these immediately?

en: If you choose to empty the trash, all items in it will be permanently lost. Please note that you can also delete them separately.
en_CA: If you choose to empty the trash, all items in it will be permanently lost. Please note that you can also delete them individually.

en: Display dialog boxes from shell scripts
en_CA: Display dialogue boxes from shell scripts

en: You must specify a dialog type. See 'matedialog --help' for details
en_CA: You must specify a dialogue type. See 'matedialog --help' for details

en: could not parse command from stdin
en_CA: Could not parse command from stdin

en: No column titles specified for List dialog.
en_CA: No column titles specified for List dialogue.

en: You should use only one List dialog type.
en_CA: You should use only one List dialogue type.

en: Set the dialog title
en_CA: Set the dialogue title

en: Set dialog timeout in seconds
en_CA: Set dialogue timeout in seconds

en: Display calendar dialog
en_CA: Display calendar dialogue

en: Set the dialog text
en_CA: Set the dialogue text

en: Display text entry dialog
en_CA: Display text entry dialogue

en: Display error dialog
en_CA: Display error dialogue

en: Display info dialog
en_CA: Display info dialogue

en: Display file selection dialog
en_CA: Display file selection dialogue

en: Display list dialog
en_CA: Display list dialogue

en: Display progress indication dialog
en_CA: Display progress indication dialogue

en: Dismiss the dialog when 100% has been reached
en_CA: Dismiss the dialogue when 100% has been reached

en: Display question dialog
en_CA: Display question dialogue

en: Display text information dialog
en_CA: Display text information dialogue

en: Display warning dialog
en_CA: Display warning dialogue

en: Display scale dialog
en_CA: Display scale dialogue

en: --%s is not supported for this dialog
en_CA: --%s is not supported for this dialogue

en: Two or more dialog options specified
en_CA: Two or more dialogue options specified

en: The document is composed by several files. One or more of such files cannot be accessed.
en_CA: The document is composed of several files. One or more of those files cannot be accessed.

en: Cannot find zip signature
en_CA: Cannot find ZIP signature

en: Invalid zip file
en_CA: Invalid ZIP file

en: Multi file zips are not supported
en_CA: Multi-file ZIPs are not supported

en: Cannot find file in the zip archive
en_CA: Cannot find file in the ZIP archive

en: Color of highlight for all matches
en_CA: Colour of highlight for all matches

en: Current color
en_CA: Current colour

en: Color of highlight for the current match
en_CA: Colour of highlight for the current match

en: Atril is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Atril is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Atril is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Atril is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Atril; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
en_CA: You should have received a copy of the GNU General Public Licence along with Atril; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

en: Setup the page settings for printing
en_CA: Configure the page settings for printing

en: Boolean options available, true enables thumbnailing and false disables the creation of new thumbnails
en_CA: Boolean options available: true enables thumbnailing and false disables the creation of new thumbnails

en: Engrampa is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Engrampa is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Engrampa is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Engrampa is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Engrampa; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
en_CA: You should have received a copy of the GNU General Public Licence along with Engrampa; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA

en: Fibers
en_CA: Fibres

en: Drag a color to an object to change it to that color
en_CA: Drag a colour to an object to change it to that colour

en: %m/%-d/%y, %-I:%M %p
en_CA: %-d/%m/%y, %-I:%M %p

en: %m/%d/%y
en_CA: %d/%m/%y

en: Enables the classic Caja behavior, where all windows are browsers
en_CA: Enables the classic Caja behaviour, where all windows are browsers

en: Default Background Color
en_CA: Default Background Colour

en: Default Side Pane Background Color
en_CA: Default Side Pane Background Colour

note: tooltip
en: Show a window that lets you set your desktop background's pattern or color
en_CA: Show a window that lets you set your desktop background's pattern or colour

en: <b>Behavior</b>
en_CA: <b>Behaviour</b>

en: The history location doesn't exist.
en_CA: The history location does not exist.

en: Create a New Color:
en_CA: Create a New Colour:

en: Color _value:
en_CA: Colour _value:

en: The color cannot be installed.
en_CA: The colour cannot be installed.

en: Sorry, but you must specify an unused color name for the new color.
en_CA: Sorry, but you must specify an unused colour name for the new colour.

en: Sorry, but you must specify a non-blank name for the new color.
en_CA: Sorry, but you must specify a non-blank name for the new colour.

en: Select a Color to Add
en_CA: Select a Colour to Add

en: _Add a New Color...
en_CA: _Add a New Colour...

en: Click on a color to remove it
en_CA: Click on a colour to remove it

en: _Remove a Color...
en_CA: _Remove a Colour...

en: Caja is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Caja is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Caja is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Caja is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: Display patterns, colors, and emblems that can be used to customize appearance
en_CA: Display patterns, colours, and emblems that can be used to customize appearance

en: You don't insert the package name
en_CA: You must specify the package name

en: Programming error, could not find the device in the list
en_CA: Programming error: could not find the device in the list

en: Device does not support Obex File Transfer
en_CA: Device does not support OBEX File Transfer

en: This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
en_CA: You should have received a copy of the GNU General Public Licence along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

en: Programmer error: The application sent invalid data.
en_CA: Programming error: The application sent invalid data.

note: Translators: This is a strftime format string. * It is used to display the date. Replace %e with %d if, when * the day of the month as a decimal number is a single digit, * it should begin with a 0 in your locale (e.g. "May 01" * instead of "May  1").
en: %a %b %e
en_CA: %a %e %b

note: Translators: This is a strftime format string. * It is used to display a date in the full format (so that people can * copy and paste it elsewhere).
en: %A, %B %d %Y
en_CA: %A, %d %B %Y

en: Enable program list in "Run Application" dialog
en_CA: Enable program list in "Run Application" dialogue

en: If true, the "Known Applications" listing in the "Run Application" dialog is made available. Whether or not the listing is expanded when the dialog is shown is controlled by the show_program_list key.
en_CA: If true, the "Known Applications" listing in the "Run Application" dialogue is made available. Whether or not the listing is expanded when the dialogue is shown is controlled by the show_program_list key.

en: Expand program list in "Run Application" dialog
en_CA: Expand program list in "Run Application" dialogue

en: If true, the "Known Applications" listing in the "Run Application" dialog is expanded when the dialog is opened. This key is only relevant if the enable_program_list key is true.
en_CA: If true, the "Known Applications" listing in the "Run Application" dialogue is expanded when the dialogue is opened. This key is only relevant if the enable_program_list key is true.

en: Enable autocompletion in "Run Application" dialog
en_CA: Enable autocompletion in "Run Application" dialogue

en: If true, autocompletion in the "Run Application" dialog is made available.
en_CA: If true, autocompletion in the "Run Application" dialogue is made available.

en: A list of panel IDs. Each ID identifies an individual toplevel panel. The settings for each of these panels are stored in /apps/panel/toplevels/$(id).
en_CA: A list of panel IDs. Each ID identifies an individual top-level panel. The settings for each of these panels are stored in /apps/panel/toplevels/$(id).

en: If true, a dialog is shown asking for confirmation if the user wants to remove a panel.
en_CA: If true, a dialogue is shown asking for confirmation if the user wants to remove a panel.

en: Center panel on x-axis
en_CA: Centre panel on x-axis

en: Center panel on y-axis
en_CA: Centre panel on y-axis

en: Specifies the background color for the panel in #RGB format.
en_CA: Specifies the background colour for the panel in #RGB format.

en: Background color opacity
en_CA: Background colour opacity

en: Specifies the opacity of the background color format. If the color is not completely opaque (a value of less than 65535), the color will be composited onto the desktop background image.
en_CA: Specifies the opacity of the background colour format. If the color is not completely opaque (a value of less than 65535), the colour will be composited onto the desktop background image.

en: A pop out drawer to store other items in
en_CA: A pop-out drawer to store other items in

en: Change desktop appearance and behavior, get help, or log out
en_CA: Change desktop appearance and behaviour, get help, or log out

en: Could not display properties dialog
en_CA: Could not display properties dialogue

en: Solid c_olor
en_CA: Solid c_olour

en: URI list dropped on run dialog had wrong format (%d) or length (%d)
en_CA: URI list dropped on run dialogue had wrong format (%d) or length (%d)

en: Could not display run dialog
en_CA: Could not display run dialogue

en: Top Centered Panel
en_CA: Top Centred Panel

en: Bottom Centered Panel
en_CA: Bottom Centred Panel

en: Left Centered Panel
en_CA: Left Centred Panel

en: Right Centered Panel
en_CA: Right Centred Panel

en: Licensed under the GNU General Public License Version 2
en_CA: Licensed under the GNU General Public Licence Version 2

en: Power Manager is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License
    as published by the Free Software Foundation; either version 2
    of the License, or (at your option) any later version.
en_CA: Power Manager is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public Licence
    as published by the Free Software Foundation; either version 2
    of the Licence, or (at your option) any later version.

en: Power Manager is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
en_CA: Power Manager is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
    02110-1301, USA.
en_CA: You should have received a copy of the GNU General Public Licence
    along with this program; if not, write to the Free Software
    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
    02110-1301, USA.

en: If the screen should be dimmed to save power when the computer is idle when on AC power.
en_CA: If we should dim the screen to save power when the computer is marked as idle.

en: The maximum duration of time displayed on the x-axis of the graph.
en_CA: The maximum duration of time displayed on the X-axis of the graph.

note: TRANSLATORS: computer will just shutdown
en: The battery is below the critical level and this computer is about to shutdown.
en_CA: The battery is below the critical level and this computer is about to shut down.

en: Remaining time:
en_CA: Time remaining:

en: Cannot communicate with mdm, perhaps you have an old version running.
en_CA: Cannot communicate with MDM. Perhaps you have an old version running.

en: The nested X server (Xnest) is not available, or mdm is badly configured.
    Please install the Xnest package in order to use the nested login.
en_CA: The nested X server (Xnest) is not available, or MDM is misconfigured.
    Please install the Xnest package in order to use the nested login.

en: The X server is not available, it is likely that mdm is badly configured.
en_CA: The X server is not available. MDM may be misconfigured.

en: Too many messages were sent to mdm and it hung upon us.
en_CA: Too many messages were sent to MDM and it hung up on us.

en: If enabled, mate-session will save the session automatically. Otherwise, the logout dialog will have an option to save the session.
en_CA: If enabled, mate-session will save the session automatically. Otherwise, the logout dialogue will have an option to save the session.

en: The MATE session manager was unable to lock the file '%s'.  Please report this as a MATE bug.  Sometimes this error may occur if the file's directory is unwritable, you could try logging in via the failsafe session and ensuring that it is.
en_CA: The MATE session manager was unable to lock the file '%s'.  Please report this as a MATE bug.  Sometimes this error may occur if the file's directory is unwritable.  You could try logging in via the failsafe session and checking the directory.

en: The MATE session manager was unable to read the file: '%s'.  If this file exists it must be readable by you for MATE to work properly.  Try logging in with the failsafe session and removing this file.
en_CA: The MATE session manager was unable to read the file '%s'.  If this file exists it must be readable by you for MATE to work properly.  Try logging in with the failsafe session and removing this file.

en: Emacs, Kate and Vim-style modelines support for pluma.
en_CA: EMACS, Kate and Vim-style modelines support for pluma.

en: ContrastHigh
en_CA: Contrast High

en: Dictionary Look up
en_CA: Dictionary Lookup

en: Specify whether to use smart lookup. This key is dependant on whether the dictionary server supports this option. The default is TRUE. This key is deprecated and no longer in use.
en_CA: Specify whether to use smart lookup. This key is dependent on whether the dictionary server supports this option. The default is TRUE. This key is deprecated and no longer in use.

en: The child save process unexpectedly exited.  We are unable to write the screenshot to disk.
en_CA: The child save process unexpectedly exited.  Unable to write the screenshot to disk.

en: Run a terminal
en_CA: Open a terminal window

en: Gradients should have at least two colors
en_CA: Gradients should have at least two colours

en: GTK color specification must have the state in brackets, e.g. gtk:fg[NORMAL] where NORMAL is the state; could not parse "%s"
en_CA: GTK colour specification must have the state in brackets, e.g. gtk:fg[NORMAL] where NORMAL is the state; could not parse "%s"

en: GTK color specification must have a close bracket after the state, e.g. gtk:fg[NORMAL] where NORMAL is the state; could not parse "%s"
en_CA: GTK colour specification must have a close bracket after the state, e.g. gtk:fg[NORMAL] where NORMAL is the state; could not parse "%s"

en: Did not understand state "%s" in color specification
en_CA: Did not understand state "%s" in colour specification

en: Did not understand color component "%s" in color specification
en_CA: Did not understand colour component "%s" in colour specification

en: Blend format is "blend/bg_color/fg_color/alpha", "%s" does not fit the format
en_CA: Blend format is "blend/bg_colour/fg_colour/alpha", "%s" does not fit the format

en: Could not parse alpha value "%s" in blended color
en_CA: Could not parse alpha value "%s" in blended colour

en: Alpha value "%s" in blended color is not between 0.0 and 1.0
en_CA: Alpha value "%s" in blended colour is not between 0.0 and 1.0

en: Shade format is "shade/base_color/factor", "%s" does not fit the format
en_CA: Shade format is "shade/base_colour/factor", "%s" does not fit the format

en: Could not parse shade factor "%s" in shaded color
en_CA: Could not parse shade factor "%s" in shaded colour

en: Shade factor "%s" in shaded color is negative
en_CA: Shade factor "%s" in shaded colour is negative

en: Could not parse color "%s"
en_CA: Could not parse colour "%s"

en: /Windows/_Dialog
en_CA: /Windows/_Dialogue

en: /Windows/_Modal dialog
en_CA: /Windows/_Modal dialogue

en: This is a sample message in a sample dialog
en_CA: This is a sample message in a sample dialogue

en: Modal Dialog Box
en_CA: Modal Dialogue Box

en: You are running a case insensitive comparison on a case sensitive filesystem. Some files are not visible:
    %s
en_CA: You are running a case-insensitive comparison on a case-sensitive filesystem. Some files are not visible:
    %s

en: It contains ascii nulls.
    Perhaps it is a binary file.
en_CA: It contains ASCII NULLs.
    Perhaps it is a binary file.

en: When performing directory comparisons, you may filter out files and directories by name. Each pattern is a list of shell style wildcards separated by spaces.
en_CA: When performing directory comparisons, you may filter out files and directories by name. Each pattern is a list of shell-style wildcards separated by spaces.

en: Failed to parse message "%s" from dialog process
en_CA: Failed to parse message "%s" from dialogue process

en: Error reading from dialog display process: %s
en_CA: Error reading from dialogue display process: %s

en: Error launching metacity-dialog to ask about killing an application: %s
en_CA: Error launching metacity-dialogue to ask about killing an application: %s

en: Error launching metacity-dialog to print an error about a command: %s
en_CA: Error launching metacity-dialogue to print an error about a command: %s

en: Setting this option to false can lead to buggy behavior, so users are strongly discouraged from changing it from the default of true. Many actions (e.g. clicking in the client area, moving or resizing the window) normally raise the window as a side-effect. Set this option to false to decouple raising from other user actions. Even when this option is false, windows can still be raised by an alt-left-click anywhere on the window, a normal click on the window decorations, or by special messages from pagers, such as activation requests from tasklist applets. This option is currently disabled in click-to-focus mode. Note that the list of ways to raise windows when raise_on_click is false does not include programmatic requests from applications to raise windows; such requests will be ignored regardless of the reason for the request. If you are an application developer and have a user complaining that your application does not work with this setting disabled, tell them it is _their_ fault for breaking their window manager and that they need to change this option back to true or live with the bug they requested. See also http://bugzilla.gnome.org/show_bug.cgi?id=445447#c6.
en_CA: Setting this option to false can lead to buggy behaviour, so users are strongly discouraged from changing it from the default of true. Many actions (e.g. clicking in the client area, moving or resizing the window) normally raise the window as a side-effect. Set this option to false to decouple raising from other user actions. Even when this option is false, windows can still be raised by an alt-left-click anywhere on the window, a normal click on the window decorations, or by special messages from pagers, such as activation requests from tasklist applets. This option is currently disabled in click-to-focus mode. Note that the list of ways to raise windows when raise_on_click is false does not include programmatic requests from applications to raise windows; such requests will be ignored regardless of the reason for the request. If you are an application developer and have a user complaining that your application does not work with this setting disabled, tell them it is _their_ fault for breaking their window manager and that they need to change this option back to true or live with the bug they requested. See also http://bugzilla.gnome.org/show_bug.cgi?id=445447#c6.

en: Show the panel run application dialog
en_CA: Show the panel run application dialogue

en: The keybinding which display's the panel's "Run Application" dialog box. The format looks like "&lt;Control&gt;a" or "&lt;Shift&gt;&lt;Alt&gt;F1". The parser is fairly liberal and allows lower or upper case, and also abbreviations such as "&lt;Ctl&gt;" and "&lt;Ctrl&gt;". If you set the option to the special string "disabled", then there will be no keybinding for this action.
en_CA: The keybinding which display's the panel's "Run Program" dialogue box. The format looks like "&lt;Control&gt;a" or "&lt;Shift&gt;&lt;Alt&gt;F1". The parser is fairly liberal and allows lower or upper case, and also abbreviations such as "&lt;Ctl&gt;" and "&lt;Ctrl&gt;". If you set the option to the special string "disabled", then there will be no keybinding for this action.

en: %d stored in GConf key %s is not a reasonable cursor_size; must be in the range 1..128
en_CA: %d stored in GConf key %s is not a reasonable cursor_size; must be in the range 1--128

en: Error launching metacity-dialog to warn about apps that don't support session management: %s
en_CA: Error launching metacity-dialogue to warn about apps that don't support session management: %s

en: An unknown error occured
en_CA: An unknown error occurred

en: The following errors occured:
en_CA: The following errors occurred:

en: Color hue
en_CA: Colour hue

en: Color saturation
en_CA: Colour saturation

en: Color value
en_CA: Colour value

en: Color value (brightness, intensity)
en_CA: Colour value (brightness, intensity)

en: Save color
en_CA: Save colour

en: When selecting a brush, the color can be restored to the color that the brush was saved with. 0.0 do not modify the active color when selecting this brush 0.5 change active color towards brush color 1.0 set the active color to the brush color when selected
en_CA: When selecting a brush, the colour can be restored to the colour that the brush was saved with. 0.0 do not modify the active colour when selecting this brush 0.5 change active colour towards brush colour 1.0 set the active colour to the brush colour when selected

en: Change color hue
en_CA: Change colour hue

en: Change color hue.-0.1 small clockwise color hue shift 0.0 disable 0.5 counterclockwise hue shift by 180 degrees
en_CA: Change colour hue.-0.1 small clockwise colour hue shift 0.0 disable 0.5 counterclockwise hue shift by 180 degrees

en: Change color lightness (HSL)
en_CA: Change colour lightness (HSL)

en: Change the color lightness (luminance) using the HSL color model.-1.0 blacker 0.0 disable 1.0 whiter
en_CA: Change the colour lightness (luminance) using the HSL colour model.-1.0 blacker 0.0 disable 1.0 whiter

en: Change color satur. (HSL)
en_CA: Change colour satur. (HSL)

en: Change the color saturation using the HSL color model.-1.0 more grayish 0.0 disable 1.0 more saturated
en_CA: Change the colour saturation using the HSL colour model-1.0 more greyish 0.0 disable 1.0 more saturated

en: Change color value (HSV)
en_CA: Change colour value (HSV)

en: Change the color value (brightness, intensity) using the HSV color model. HSV changes are applied before HSL.-1.0 darker 0.0 disable 1.0 brigher
en_CA: Change the colour value (brightness, intensity) using the HSV colour model. HSV changes are applied before HSL.-1.0 darker 0.0 disable 1.0 brighter

en: Change color satur. (HSV)
en_CA: Change colour satur. (HSV)

en: Change the color saturation using the HSV color model. HSV changes are applied before HSL.-1.0 more grayish 0.0 disable 1.0 more saturated
en_CA: Change the colour saturation using the HSV colour model. HSV changes are applied before HSL.-1.0 more greyish 0.0 disable 1.0 more saturated

en: Paint with the smudge color instead of the brush color. The smudge color is slowly changed to the color you are painting on. 0.0 do not use the smudge color 0.5 mix the smudge color with the brush color 1.0 use only the smudge color
en_CA: Paint with the smudge colour instead of the brush colour. The smudge colour is slowly changed to the colour you are painting on. 0.0 do not use the smudge colour 0.5 mix the smudge colour with the brush colour 1.0 use only the smudge colour

en: This controls how fast the smudge color becomes the color you are painting on.0.0 immediately update the smudge color (requires more CPU cycles because of the frequent color checks)0.5 change the smudge color steadily towards the canvas color1.0 never change the smudge color
en_CA: This controls how fast the smudge colour becomes the colour you are painting on.0.0 immediately change the smudge colour1.0 never change the smudge colour

en: This modifies the radius of the circle where color is picked up for smudging. 0.0 use the brush radius-0.7 half the brush radius (fast, but not always intuitive)+0.7 twice the brush radius+1.6 five times the brush radius (slow performance)
en_CA: This modifies the radius of the circle where colour is picked up for smudging. 0.0 use the brush radius-0.7 half the brush radius (fast, but not always intuitive)+0.7 twice the brush radius+1.6 five times the brush radius (slow performance)

en: Colorize the target layer, setting its hue and saturation from the active brush colour while retaining its value and alpha.
en_CA: Colourize the target layer, setting its hue and saturation from the active brush colour while retaining its value and alpha.

en: Add color to Patterns
en_CA: Add colour to Patterns

en: Colorize: alter Hue and Saturation with the current brush
en_CA: Colourize: alter Hue and Saturation with the current brush

en: Color details
en_CA: Colour details

en: Newly chosen color, and the color most recently used for painting
en_CA: Newly chosen colour, and the colour most recently used for painting

en: Add color to Palette
en_CA: Add colour to Palette

en: <b>Gamut mask editor</b>
    
    Edit the gamut mask here, or turn it off or on. Gamut masks are like a piece of
    tracing paper with cut-out holes, placed over the color wheel to limit the
    range of colors you can select. This allows you to plan your color schemes in
    advance, which is useful for color scripting or to create specific moods. The
    theory is that the corners of each mask shape represent a <i>subjective</i>
    primary color, and that each shape contains all the colors which can be mixed
    using those corner primaries. Subjective secondary colors lie at the midpoints
    of the shape edges, and the center of the shape is the subjective neutral tone
    for the shape.
    
    Click to add shapes if the wheel is blank. Shapes can be dragged around and
    their outlines can be adjusted by adding or moving the control points. Make a
    shape too small to be useful to remove it: dragging a shape to the edge of the
    disc is a quick way of doing this. You can delete shapes by dragging them
    inside other shapes too. The entire mask can be rotated by turning the edge of
    the disc to generate new and unexpected color schemes.
    
    Gamut masks can be saved to GIMP-format palette files, and loaded from them.
    The New button lets you choose one of several templates as a starting point.
en_CA: <b>Gamut mask editor</b>
    
    Edit the gamut mask here, or turn it off or on. Gamut masks are like a piece of
    tracing paper with cut-out holes, placed over the colour wheel to limit the
    range of colours you can select. This allows you to plan your colour schemes in
    advance, which is useful for colour scripting or to create specific moods. The
    theory is that the corners of each mask shape represent a <i>subjective</i>
    primary colour, and that each shape contains all the colours which can be mixed
    using those corner primaries. Subjective secondary colours lie at the midpoints
    of the shape edges, and the center of the shape is the subjective neutral tone
    for the shape.
    
    Click to add shapes if the wheel is blank. Shapes can be dragged around and
    their outlines can be adjusted by adding or moving the control points. Make a
    shape too small to be useful to remove it: dragging a shape to the edge of the
    disc is a quick way of doing this. You can delete shapes by dragging them
    inside other shapes too. The entire mask can be rotated by turning the edge of
    the disc to generate new and unexpected colour schemes.
    
    Gamut masks can be saved to GIMP-format palette files, and loaded from them.
    The New button lets you choose one of several templates as a starting point.

en: One main range of colors, with a complementary accent for variation and highlights.
en_CA: One main range of colours, with a complementary accent for variation and highlights.

en: Set the color using cylindrical hue/chroma/luma space. The circular slices are equiluminant.
en_CA: Set the colour using cylindrical hue/chroma/luma space. The circular slices are equiluminant.

en: The standard GTK color selector
en_CA: The standard GTK colour selector

en: Set the color from a loadable, editable palette.
en_CA: Set the colour from a loadable, editable palette.

en: Color name:
en_CA: Colour name:

en: Color swatch palette. Drop colors here and drag them around to organize.
en_CA: Colour swatch palette. Drop colours here and drag them around to organize.

en: Empty palette slot (drag a color here)
en_CA: Empty palette slot (drag a colour here)

en: Pick a color from the screen
en_CA: Pick a colour from the screen

en: Set current color
en_CA: Set current colour

en: Frame Color
en_CA: Frame Colour

en: Color History and other tools
en_CA: Colour History and other tools

note: Colour changing
en: Change Color
en_CA: Change Colour

en: Color Window
en_CA: Colour Window

en: The top layer only, without blending colors.
en_CA: The top layer only, without blending colours.

en: Subtracts the darker color from the lighter of the two.
en_CA: Subtracts the darker colour from the lighter of the two.

en: Applies the saturation of the top layer's colors to the hue and luminosity of the backdrop.
en_CA: Applies the saturation of the top layer's colours to the hue and luminosity of the backdrop.

en: Color changer popup (concentric rings)
en_CA: Colour changer popup (concentric rings)

en: Color changer popup (crossed bowl)
en_CA: Colour changer popup (crossed bowl)

en: Color changer popup (wash)
en_CA: Colour changer popup (wash)

en: Color details dialog with text entry
en_CA: Colour details dialog with text entry

en: Decrease color brightness
en_CA: Decrease colour brightness

en: Decrease color saturation
en_CA: Decrease colour saturation

en: Increase color brightness
en_CA: Increase colour brightness

en: Increase color saturation
en_CA: Increase colour saturation

[ctx: Menu|]
en: Color
en_CA: Colour

[ctx: Menu|Brush|Shortcut Keys|]
en: Restore Color
en_CA: Restore Colour

[ctx: Menu|Color]
en: Next Palette Color
en_CA: Next Palette Colour

[ctx: Menu|Color|]
en: Adjust Color
en_CA: Adjust Colour

[ctx: Menu|Color|]
en: Change Color
en_CA: Change Colour

[ctx: Menu|Color|]
en: Change Color (ring)
en_CA: Change Colour (ring)

[ctx: Menu|Color|]
en: Change Color (wash)
en_CA: Change Colour (wash)

[ctx: Menu|Color|]
en: Color Details
en_CA: Colour Details

[ctx: Menu|Color|]
en: Color History
en_CA: Colour History

[ctx: Menu|Color|]
en: Colors Window
en_CA: Colours Window

[ctx: Menu|Color|]
en: Pick Color
en_CA: Pick Colour

[ctx: Menu|Color|]
en: Previous Palette Color
en_CA: Previous Palette Colour

[ctx: Menu|Color|Adjust Color|]
en: Grayer
en_CA: Greyer

[ctx: Menu|Scratchpad|]
en: Color Dabs
en_CA: Colour Dabs

[ctx: Menu|Scratchpad|Color Dabs|]
en: Saturation Spread for Current Color
en_CA: Saturation Spread for Current Colour

en: Mix colors and make sketches on separate scrap pages
en_CA: Mix colours and make sketches on separate scrap pages

en: Next color in the palette
en_CA: Next colour in the palette

en: Previous color in the palette
en_CA: Previous colour in the palette

en: Rotate color hue anticlockwise
en_CA: Rotate colour hue anticlockwise

en: Rotate color hue clockwise
en_CA: Rotate colour hue clockwise

en: Set the color used for painting
en_CA: Set the colour used for painting

en: Enables the classic Nautilus behavior, where all windows are browsers
en_CA: Enables the classic Nautilus behaviour, where all windows are browsers

en: If set to true, then all Nautilus windows will be browser windows. This is how Nautilus used to behave before version 2.6, and some people prefer this behavior.
en_CA: If set to true, then all Nautilus windows will be browser windows. This is how Nautilus used to behave before version 2.6, and some people prefer this behaviour.

en: All executable files in this folder will appear in the Scripts menu. Choosing a script from the menu will run that script.
    
    When executed from a local folder, scripts will be passed the selected file names. When executed from a remote folder (e.g. a folder showing web or ftp content), scripts will be passed no parameters.
    
    In all cases, the following environment variables will be set by Nautilus, which the scripts may use:
    
    NAUTILUS_SCRIPT_SELECTED_FILE_PATHS: newline-delimited paths for selected files (only if local)
    
    NAUTILUS_SCRIPT_SELECTED_URIS: newline-delimited URIs for selected files
    
    NAUTILUS_SCRIPT_CURRENT_URI: URI for current location
    
    NAUTILUS_SCRIPT_WINDOW_GEOMETRY: position and size of current window
    
    NAUTILUS_SCRIPT_NEXT_PANE_SELECTED_FILE_PATHS: newline-delimited paths for selected files in the inactive pane of a split-view window (only if local)
    
    NAUTILUS_SCRIPT_NEXT_PANE_SELECTED_URIS: newline-delimited URIs for selected files in the inactive pane of a split-view window
    
    NAUTILUS_SCRIPT_NEXT_PANE_CURRENT_URI: URI for current location in the inactive pane of a split-view window
en_CA: All executable files in this folder will appear in the Scripts menu. Choosing a script from the menu will run that script.
    
    When executed from a local folder, scripts will be passed the selected file names. When executed from a remote folder (e.g. a folder showing web or ftp content), scripts will be passed no parametres.
    
    In all cases, the following environment variables will be set by Nautilus, which the scripts may use:
    
    NAUTILUS_SCRIPT_SELECTED_FILE_PATHS: newline-delimited paths for selected files (only if local)
    
    NAUTILUS_SCRIPT_SELECTED_URIS: newline-delimited URIs for selected files
    
    NAUTILUS_SCRIPT_CURRENT_URI: URI for current location
    
    NAUTILUS_SCRIPT_WINDOW_GEOMETRY: position and size of current window
    
    NAUTILUS_SCRIPT_NEXT_PANE_SELECTED_FILE_PATHS: newline-delimited paths for selected files in the inactive pane of a split-view window (only if local)
    
    NAUTILUS_SCRIPT_NEXT_PANE_SELECTED_URIS: newline-delimited URIs for selected files in the inactive pane of a split-view window
    
    NAUTILUS_SCRIPT_NEXT_PANE_CURRENT_URI: URI for current location in the inactive pane of a split-view window

en: Nautilus is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Nautilus is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Nautilus is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Nautilus is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Nautilus; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
en_CA: You should have received a copy of the GNU General Public Licence along with Nautilus; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

en: The server crashed during installation.
    We suggest you to drop this database.
en_CA: The server crashed during installation.
    We suggest you drop this database.

en: Check this box if you want demonstration data to be installed on your new database. These data will help you to understand OpenERP, with predefined products, partners, etc.
en_CA: Check this box if you want demonstration data to be installed on your new database. These data will help you to understand OpenERP with predefined products, partners, etc.

en: This is the password of the user that have the rights to administer databases. This is not a OpenERP user, just a super administrator. If you did not changed it, the password is 'admin' after installation.
en_CA: This is the password of the user that has the rights to administer databases. This is not an OpenERP user, just a super administrator. If you did not change it, the password is 'admin' after installation.

en: Send to Publisher Warranty Team
en_CA: Send to the Publisher Warranty Team

en: Performs the where am I operation.
en_CA: Performs the "Where Am I" operation.

en: ColorChooser
en_CA: ColourChooser

en: HtmlContainer
en_CA: HTMLContainer

en: h t m l container
en_CA: HTML container

en: Can't use regular expression "%s": %s
en_CA: Cannot use regular expression "%s": %s

en: Couldn't parse %s color "%s"
en_CA: Couldn't parse %s colour "%s"

en: _Behavior
en_CA: _Behaviour

en: _Colors
en_CA: _Colours

en: The news server's port number.  Typically 119.
en_CA: The news server's port number (typically 119).

en: Click to make this setting not mandatory
en_CA: Click to make this setting optional

en: 7" Vinyl
en_CA: 7″ Vinyl

en: 10" Vinyl
en_CA: 10″ VInyl

en: 12" Vinyl
en_CA: 12″ Vinyl

en: Guinea-Bissa
en_CA: Guinea-Bissau

en: Looking up the PUID for file %s...
en_CA: Looking up the PUID for file %s…

en: Looking up the metadata for file %s...
en_CA: Looking up the metadata for file %s…

en: Catalog #s
en_CA: Catalogue #s

en: Picard listens on a port to integrate with your browser and downloads release information when you click the "Tagger" buttons on the MusicBrainz website
en_CA: Picard listens on a port to integrate with your browser and downloads release information when you click the “Tagger” buttons on the MusicBrainz website

en: >
en_CA: →

en: <
en_CA: ←

en: <br/>Translated to LANG by %s
en_CA: <br/>Translated to English (canada) by %s

en: Catalog Number
en_CA: Catalogue Number

en: %s is not a valid message class. See '/help msgcolor' for valid message classes.
en_CA: %s is not a valid message class. See '/help msgcolour' for valid message classes.

en: %s is not a valid color. See '/help msgcolor' for valid colors.
en_CA: %s is not a valid colour. See '/help msgcolour' for valid colours.

en: msgcolor &lt;class&gt; &lt;foreground&gt; &lt;background&gt;: Set the color for different classes of messages in the conversation window.<br>    &lt;class&gt;: receive, send, highlight, action, timestamp<br>    &lt;foreground/background&gt;: black, red, green, blue, white, gray, darkgray, magenta, cyan, default<br><br>EXAMPLE:<br>    msgcolor send cyan default
en_CA: msgcolour &lt;class&gt; &lt;foreground&gt; &lt;background&gt;: Set the colour for different classes of messages in the conversation window.<br>    &lt;class&gt;: receive, send, highlight, action, timestamp<br>    &lt;foreground/background&gt;: black, red, green, blue, white, grey, darkgrey, magenta, cyan, default<br><br>EXAMPLE:<br>    msgcolour send cyan default

en: Humor
en_CA: Humour

en: Favorite Quote
en_CA: Favourite Quote

en: Favorite Things
en_CA: Favourite Things

en: Zip Code
en_CA: Postal Code

en: The background color for the buddy list
en_CA: The background colour for the buddy list

note: Group Note to translators: These two strings refer to the background color of a buddy list group when in its expanded state
en: Expanded Background Color
en_CA: Expanded Background Colour

en: The background color of an expanded group
en_CA: The background colour of an expanded group

note: Note to translators: These two strings refer to the background color of a buddy list group when in its collapsed state
en: Collapsed Background Color
en_CA: Collapsed Background Colour

en: The background color of a collapsed group
en_CA: The background colour of a collapsed group

note: Buddy Note to translators: These two strings refer to the background color of a buddy list contact or chat room
en: Contact/Chat Background Color
en_CA: Contact/Chat Background Colour

en: The background color of a contact or chat
en_CA: The background colour of a contact or chat

en: Color to draw hyperlinks.
en_CA: Colour to draw hyperlinks.

en: Hyperlink visited color
en_CA: Hyperlink visited colour

en: Color to draw hyperlink after it has been visited (or activated).
en_CA: Colour to draw hyperlink after it has been visited (or activated).

en: Hyperlink prelight color
en_CA: Hyperlink prelight colour

en: Color to draw hyperlinks when mouse is over them.
en_CA: Colour to draw hyperlinks when mouse is over them.

en: Sent Message Name Color
en_CA: Sent Message Name Colour

en: Color to draw the name of a message you sent.
en_CA: Colour to draw the name of a message you sent.

en: Received Message Name Color
en_CA: Received Message Name Colour

en: Color to draw the name of a message you received.
en_CA: Colour to draw the name of a message you received.

en: "Attention" Name Color
en_CA: "Attention" Name Colour

en: Color to draw the name of a message you received containing your name.
en_CA: Colour to draw the name of a message you received containing your name.

en: Action Message Name Color
en_CA: Action Message Name Colour

en: Color to draw the name of an action message.
en_CA: Colour to draw the name of an action message.

en: Action Message Name Color for Whispered Message
en_CA: Action Message Name Colour for Whispered Message

en: Color to draw the name of a whispered action message.
en_CA: Colour to draw the name of a whispered action message.

en: Whisper Message Name Color
en_CA: Whisper Message Name Colour

en: Color to draw the name of a whispered message.
en_CA: Colour to draw the name of a whispered message.

en: Typing notification color
en_CA: Typing notification colour

en: The color to use for the typing notification
en_CA: The colour to use for the typing notification

en: Select Text Color
en_CA: Select Text Colour

en: Select Background Color
en_CA: Select Background Colour

en: Foreground _color
en_CA: Foreground _colour

en: Conversation Colors
en_CA: Conversation Colours

en: Customize colors in the conversation window
en_CA: Customize colours in the conversation window

en: Select Color for %s
en_CA: Select Colour for %s

en: Hyperlink Color
en_CA: Hyperlink Colour

en: Visited Hyperlink Color
en_CA: Visited Hyperlink Colour

en: Highlighted Message Name Color
en_CA: Highlighted Message Name Colour

en: Typing Notification Color
en_CA: Typing Notification Colour

en: Click and drag to draw a rounded rectangle (right click for secondary color). Hold shift to constrain to a square.
en_CA: Click and drag to draw a rounded rectangle (right click for secondary colour). Hold shift to constrain to a square.

en: Color Burn
en_CA: Colour Burn

en: Color Dodge
en_CA: Colour Dodge

en: Invert Colors
en_CA: Invert Colours

en: Can't connect to database server
en_CA: Cannot connect to database server

en: Couldn't import file.
en_CA: Could not import file.

en: Could not create properties dialog.
en_CA: Could not create properties dialogue.

en: Can't create tables in database %s
en_CA: Cannot create tables in database %s

en: Database %s is not setup for Planner. Do you want to do that?
en_CA: Database %s is not set up for Planner. Do you want to do that?

en: You are about to open an edit dialog each for %i tasks. Are you sure that you want to do that?
en_CA: You are about to open an edit dialogue for each of %i tasks. Are you sure that you want to do that?

en: The database has been externally modified.
    Overwrite changes ?
en_CA: The database has been externally modified.
    Overwrite changes?

en: An internal error occured during saving
    Try to Save As...
en_CA: An internal error occurred during saving
    Try to Save As...

en: The file `%s' already exists.
    Overwrite it ?
en_CA: The file `%s' already exists.
    Overwrite it?

en: An entry called `%s' already exists.
    Rename and add it anyway ?
en_CA: An entry called `%s' already exists.
    Rename and add it anyway?

en: Really remove all the entries ?
en_CA: Really remove all the entries?

en: Really edit %d entries ?
en_CA: Really edit %d entries?

en: Remove all the %d entries ?
en_CA: Remove all the %d entries?

en: Remove entry `%s' ?
en_CA: Remove entry `%s'?

en: Determining Mime Type ...
en_CA: Determining MIME Type ...

en: Cannot determine mime type for item %s
en_CA: Cannot determine MIME type for item %s

en: URL in question is: %s
    You should check the url or path given for errors.
    Details: %s
en_CA: URL in question is: %s
    You should check the URL or path for errors.
    Details: %s

en: For mime type %s, no entry found in 
    configuration option resource/viewers.
    Please consider adding one.
    URL: %s
en_CA: For MIME type %s, no entry found in 
    configuration option resource/viewers.
    Please consider adding one.
    URL: %s

en: command|filename
en_CA: filename

en: command|tag
en_CA: tag

en: _Weight
en_CA: _Weighted

en: license
en_CA: licence

en: Current-match color
en_CA: Current-match colour

en: Match color
en_CA: Match colour

en: The background color used to highlight matches of the search expression.
en_CA: The background colour used to highlight matches of the search expression.

en: The background color used to highlight the currently selected match of the search expression.
en_CA: The background colour used to highlight the currently selected match of the search expression.

en: C_urrent match color:
en_CA: C_urrent match colour:

en: _Match color:
en_CA: _Match colour:

note: Translators: "friendly time" string for the current day, strftime format. like "Today 12:34 am"
en: Today %I:%M %p
en_CA: Today %H:%M

note: Translators: "friendly time" string for the previous day, * strftime format. e.g. "Yesterday 12:34 am"
en: Yesterday %I:%M %p
en_CA: Yesterday %H:%M

note: Translators: "friendly time" string for a day in the current week, * strftime format. e.g. "Wed 12:34 am"
en: %a %I:%M %p
en_CA: %a %H:%M

note: Translators: "friendly time" string for a day in the current year, * strftime format. e.g. "Feb 12 12:34 am"
en: %b %d %I:%M %p
en_CA: %d %b %H:%M

en: Couldn't load Audio CD
en_CA: Could not load Audio CD

en: Rhythmbox couldn't access the CD.
en_CA: Rhythmbox could not access the CD.

en: Rhythmbox couldn't read the CD information.
en_CA: Rhythmbox could not read the CD information.

en: Couldn't open media
en_CA: Could not open media

en: Please make sure another application is not using the drive.
en_CA: Please make sure no other applications are using the drive.

en: This playlist is %s minutes long.  This exceeds the length of a standard audio CD.  If the destination media is larger than a standard audio CD please insert it in the drive and try again.
en_CA: This playlist is %s minutes long, which exceeds the length of a standard audio CD.  If the destination media is larger than a standard audio CD please insert it in the drive and try again.

en: Could not find enough temporary space to convert audio tracks.  %s MiB required.
en_CA: Could not find enough temporary space to convert audio tracks.  %s MB required.

en: On jamendo, the artists distribute their music under Creative Commons licenses.
    In a nutshell, they allow you to download, remix and share their music freely.
    It's a "Some rights reserved" agreement, perfectly suited for the new century.
en_CA: On jamendo, the artists distribute their music under Creative Commons licences.
    In a nutshell, they allow you to download, remix and share their music freely.
    It's a "Some rights reserved" agreement, perfectly suited for the new century.

en: jamendo is the only platform that joins together :
en_CA: jamendo is the only platform that joins together:

en: jamendo users can discover and share albums, but also review them or start a discussion on the forums.
    Albums are democratically rated based on the visitors’ reviews.
    If they fancy an artist they can support him by making a donation.
en_CA: jamendo users can discover and share albums, but also review them or start a discussion on the forums.
    Albums are democratically rated based on the visitors’ reviews.
    Artists can be supported by making a donation.

en: URL of internet radio station:
en_CA: URL of Internet radio station:

en: Expiry:
en_CA: Expiration:

en: Expiry _month:
en_CA: Expiration _month:

en: Expiry _year (last two digits):
en_CA: Expiration _year (last two digits):

en: Rhythmbox could not understand the Magnatune catalogue, please file a bug.
en_CA: Rhythmbox could not understand the Magnatune catalogue.  Please file a bug.

en: You can access the main window through the 'shell' variable :
en_CA: You can access the main window through the 'shell' variable:

en: The URL "%s" is not valid, please check it.
en_CA: The URL "%s" is not valid. Please check it.

en: Couldn't monitor %s: %s
en_CA: Could not monitor %s: %s

en: Couldn't access %s: %s
en_CA: Could not access %s: %s

en: Don't save any data permanently (implies --no-registration)
en_CA: Do not save any data permanently (implies --no-registration)

en: Couldn't read playlist
en_CA: Could not read playlist

en: Couldn't save playlist
en_CA: Could not save playlist

en: Couldn't stop playback
en_CA: Could not stop playback

en: Couldn't display help
en_CA: Could not display help

en: Rhythmbox is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.
en_CA: Rhythmbox is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public Licence as published by
    the Free Software Foundation; either version 2 of the Licence, or
    (at your option) any later version.

en: Rhythmbox is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
en_CA: Rhythmbox is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License
    along with Rhythmbox; if not, write to the Free Software Foundation, Inc.,
    51 Franklin St, Fifth Floor, Boston, MA 02110-1301  USA
en_CA: You should have received a copy of the GNU General Public Licence
    along with Rhythmbox; if not, write to the Free Software Foundation, Inc.,
    51 Franklin St, Fifth Floor, Boston, MA 02110-1301  USA

en: %d import errors | %d import errors
en_CA[0]: %d import error
en_CA[1]: %d import errors

en: Your account does not have permissions to run the Desktop User Profiles tool
en_CA: Your account does not have permission to run the Desktop User Profiles tool

en: Administrator level permissions are needed to run this program because it can modify system files.
en_CA: Administrator-level permission are needed to run this program because it can modify system files.

note: ../themes/Crux/theme.jl
en: Accent color for focused windows (if unset uses the GTK+ selection color).
en_CA: Accent colour for focused windows (if unset uses the GTK+ selection colour).

note: ../themes/gradient/theme.jl
en: `From' color of inactive frames in `gradient' frame style.
en_CA: `From' colour of inactive frames in `gradient' frame style.

note: ../themes/gradient/theme.jl
en: `To' color of inactive frames in `gradient' frame style.
en_CA: `To' colour of inactive frames in `gradient' frame style.

note: ../themes/gradient/theme.jl
en: `From' color of active frames in `gradient' frame style.
en_CA: `From' colour of active frames in `gradient' frame style.

note: ../themes/gradient/theme.jl
en: `To' color of active frames in `gradient' frame style.
en_CA: `To' colour of active frames in `gradient' frame style.

note: ../themes/mono/theme.jl
en: Color of inactive frames (if unset use GTK+ background color).
en_CA: Colour of inactive frames (if unset use GTK+ background colour).

note: ../themes/mono/theme.jl
en: Color of active frames (if unset use GTK+ selection color).
en_CA: Colour of active frames (if unset use GTK+ selection colour).

note: ../themes/simple/theme.jl
en: Color of inactive frames in `simple' frame style.
en_CA: Colour of inactive frames in `simple' frame style.

note: ../themes/simple/theme.jl
en: Color of active frames in `simple' frame style.
en_CA: Colour of active frames in `simple' frame style.

note: ../themes/smaker/theme.jl
en: Color to use when drawing text.
en_CA: Colour to use when drawing text.

note: ../lisp/sawfish/wm/placement.jl
en: Method of placing dialog windows: \w
en_CA: Method of placing dialogue windows: \w

en: 16 colors   - (4bit)
en_CA: 16 colours   - (4bit)

en: 64 colors   - (6bit)
en_CA: 64 colours   - (6bit)

en: 256 colors  - (8bit)
en_CA: 256 colours  - (8bit)

en: Reduce colors
en_CA: Reduce colours

en: Automatically reduce colors after taking a screenshot
en_CA: Automatically reduce colours after taking a screenshot

en: Show as custom color:
en_CA: Show as custom colour:

en: Choose fill color
en_CA: Choose fill colour

en: Displays any transparent parts of the image in a solid color that you specify
en_CA: Displays any transparent parts of the image in a solid colour that you specify

en: Displays any transparent parts of the image in the background color of the application
en_CA: Displays any transparent parts of the image in the background colour of the application

en: Maybe mouse pointer could not be grabbed or the selected area is invalid.
en_CA: Maybe the mouse pointer could not be grabbed or the selected area is invalid.

en: Adjust fill color and opacity
en_CA: Adjust fill colour and opacity

en: Stroke color
en_CA: Stroke colour

en: Choose stroke color
en_CA: Choose stroke colour

en: Adjust stroke color and opacity
en_CA: Adjust stroke colour and opacity

en: Do you want to save the changed background color?
en_CA: Do you want to save the changed background colour?

en: The background is likely to be transparent if you decide to ignore the background color.
en_CA: The background is likely to be transparent if you decide to ignore the background colour.

en: Save Background Color
en_CA: Save Background Colour

en: _Ignore Background Color
en_CA: _Ignore Background Colour

en: _Save Background Color
en_CA: _Save Background Colour

en: Change Background Color...
en_CA: Change Background Colour...

en: Choose font color
en_CA: Choose font colour

en: Draw a ellipse
en_CA: Draw an ellipse

en: Turn the image into a grayscale image (256 shades)
en_CA: Turn the image into a greyscale image (256 shades)

en: Raise a rectangular 3d-border
en_CA: Raise a rectangular 3D border

en: Add an inverted 3d border to the image
en_CA: Add an inverted 3D border to the image

en: Torned Paper
en_CA: Torn Paper

en: off - No automatic adjustment
    
    c - Center bounding box in output
    
    zc - Zoom to fill and center bounding box in output
    
    out - Creates an output image of size needed to hold the transformed image
en_CA: off - No automatic adjustment
    
    c - Centre bounding box in output
    
    zc - Zoom to fill and centre bounding box in output
    
    out - Creates an output image of size needed to hold the transformed image

en: Sky color
en_CA: Sky colour

en: Choose sky color
en_CA: Choose sky colour

en: The parameter d describes the linear scaling of the image. Using d=1, and a=b=c=0 leaves the image as it is. Choosing other d-values scales the image by that amount. a,b and c distort the image. Using negative values shifts distant points away from the center.
    
    Defined by Barrel Correction Distortion, by Helmut Dersch.
    http://www.all-in-one.ee/~dersch/barrel/barrel.html
en_CA: The parameter d describes the linear scaling of the image. Using d=1, and a=b=c=0 leaves the image as it is. Choosing other d-values scales the image by that amount. a,b and c distort the image. Using negative values shifts distant points away from the centre.
    
    Defined by Barrel Correction Distortion, by Helmut Dersch.
    http://www.all-in-one.ee/~dersch/barrel/barrel.html

en: Invert the colors of the image
en_CA: Invert the colours of the image

en: Choose color
en_CA: Choose colour

en: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometers, miles and knots.
en_CA: Indicates the unit used to express the distance to the destination point. 'K', 'M' and 'N' represent kilometres, miles and knots.

en: CD-TEXT metadata plugin failed to initialise.
en_CA: CD-TEXT metadata plugin failed to initialize.

en: In fish-eye projection, or <i>azimuthal equidistant projection</i>, straight lines become curves when they appear a large angular distance from the centre of the field of view (like the distortions seen with very wide angle camera lenses).
en_CA: In fish-eye projection, or <i>azimuthal equidistant projection</i>, straight lines become curves when they appear a large angular distance from the center of the field of view (like the distortions seen with very wide angle camera lenses).

en: Finished downloading new star catalogs!
    Restart Stellarium to display them.
en_CA: Finished downloading new star catalogues!
    Restart Stellarium to display them.

en: Get catalog %1 of %2
en_CA: Get catalogue %1 of %2

note: TRANSLATORS: The parameter is a file/directory path that may be quite long.
en: Stellarium cannot open for reading or writing %1
en_CA: Stellarium cannot open %1 for reading or writing

en: Due to the quirks in Mercury's orbit and rotation at certain spots the sun will rise & set 3 different times in one Mercury day.
en_CA: Due to the quirks in Mercury's orbit and rotation, at certain spots the sun will rise & set 3 different times in one Mercury day.

en: Auto hide horizontal button bar
en_CA: Auto-hide horizontal button bar

en: Auto hide vertical button bar
en_CA: Auto-hide vertical button bar

en: Enter the altitude in meter
en_CA: Enter the altitude in meters

en: Star catalog updates
en_CA: Star catalogue updates

en: Orbital elements go out of date pretty quickly (over mere weeks, sometimes days).  To get useful data out, you need to update the TLE data regularly.
en_CA: Orbital elements go out of date pretty quickly (over mere weeks, sometimes days). To get useful data out, you need to update the TLE data regularly.

note: TRANSLATORS: The translated names of the button and the tab are filled in automatically. You can check the original names in Stellarium. File names are not translated.
en: Clicking the "%1" button in the "%2" tab of this dialog will revert to the default %3 file.  The old file will be backed up as %4.  This can be found in the user data directory, under "modules/Satellites/".
en_CA: Clicking the "%1" button in the "%2" tab of this dialog will revert to the default %3 file. The old file will be backed up as %4. This can be found in the user data directory, under "modules/Satellites/".

en: The Satellites plugin is still under development.  Some features are incomplete, missing or buggy.
en_CA: The Satellites plugin is still under development. Some features are incomplete, missing or buggy.

en: If you disable Internet updates, you may update from a file on your computer.  This file must be in the same format as the Celestrak updates (see %1 for an example).
en_CA: If you disable Internet updates, you may update from a file on your computer. This file must be in the same format as the Celestrak updates (see %1 for an example).

en: Armory
en_CA: Armoury

en: Ma_ximise terminal
en_CA: Ma_ximize terminal

en: Integer value indicating if there is a preference to always perform a specific behavior when a conflict is detected, instead of prompting the user. The values map to an internal enumeration. 0 indicates that the user wishes to be prompted when a conflict occurs, so that they may handle each conflict situation on a case-by-case basis.
en_CA: Integer value indicating if there is a preference to always perform a specific behaviour when a conflict is detected, instead of prompting the user. The values map to an internal enumeration. 0 indicates that the user wishes to be prompted when a conflict occurs, so that they may handle each conflict situation on a case-by-case basis.

en: Integer value indicating if there is a preference to always perform a specific link updating behavior when a note is renamed, instead of prompting the user. The values map to an internal enumeration. 0 indicates that the user wishes to be prompted when renaming a note may impact links that exist in other notes. 1 indicates that links should automatically be removed. 2 indicates that link text should be updated to the new note name so that it will continue linking to the renamed note.
en_CA: Integer value indicating if there is a preference to always perform a specific link updating behaviour when a note is renamed, instead of prompting the user. The values map to an internal enumeration. 0 indicates that the user wishes to be prompted when renaming a note may impact links that exist in other notes. 1 indicates that links should automatically be removed. 2 indicates that link text should be updated to the new note name so that it will continue linking to the renamed note.

en: Link Updating Behavior on Note Rename
en_CA: Link Updating Behaviour on Note Rename

en: Note Synchronization Conflict Saved Behavior
en_CA: Note Synchronization Conflict Saved Behaviour

en: Synchronization Canceled
en_CA: Synchronization Cancellled

en: Synchronization was canceled
en_CA: Synchronization was cancellled

en: You canceled the synchronization.  You may close the window now.
en_CA: You cancellled the synchronization.  You may close the window now.

en: Totem is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
en_CA: Totem is free software; you can redistribute it and/or modify it under the terms of the GNU General Public Licence as published by the Free Software Foundation; either version 2 of the Licence, or (at your option) any later version.

en: Totem is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
en_CA: Totem is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public Licence for more details.

en: You should have received a copy of the GNU General Public License along with Totem; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
en_CA: You should have received a copy of the GNU General Public Licence along with Totem; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

en: A format string used to build the network service name used when publishing playlists over the network. The following format placeholders can be used: • %a: the program name as returned by g_get_application_name() • %h: the machine's host name in title case • %u: the user's login name in title case • %U: the user's real name • %%: the percent sign
en_CA: A format string used to build the network service name used when publishing playlists over the network. The following format placeholders can be used: • a%: the program name as returned by g_get_application_name() • %h: the machine's host name in title case • %u: the user's login name in title case • %U: the user's real name • %%: the percent sign

en: <b>Color balance</b>
en_CA: <b>Colour balance</b>

en: Maximum amount of data to decode ahead of display (in seconds)
en_CA: Maximum amount of data to decode before displaying (in seconds)

en: Properties dialog
en_CA: Properties dialogue

en: Couldn't load the '%s' interface.
en_CA: Could not load the '%s' interface.

en: The playlist '%s' could not be parsed, it might be damaged.
en_CA: The playlist '%s' could not be parsed. It might be damaged.

en: Totem couldn't show the movie properties window.
en_CA: Totem could not show the movie properties window.

en: Couldn't load the main interface (vanity.glade).
    Make sure that Vanity is properly installed.
en_CA: Could not load the main interface (vanity.glade).
    Make sure that Vanity is properly installed.

en: Could not open location; You may not have permission to open the file.
en_CA: Could not open location. You may not have permission to open the file.

en: Couldn't load the '%s' audio driver
    Check that the device is not busy.
en_CA: Could not load the '%s' audio driver
    Check that the device is not busy.

en: The source seems encrypted, and can't be read. Are you trying to play an encrypted DVD without libdvdcss?
en_CA: The source seems encrypted, and canot be read. Are you trying to play an encrypted DVD without libdvdcss?

en: Failed to find mountpoint for device %s in /etc/fstab
en_CA: Failed to find mount point for device %s in /etc/fstab

en: Unexpected/unknown cd type 0x%x (%s)
en_CA: Unexpected/unknown CD type 0x%x (%s)

en: Couldn't write parser: %s
en_CA: Could not write parser: %s

en: Couldn't open file '%s': %s
en_CA: Could not open file '%s': %s

en: Honor global _limits
en_CA: Honour global _limits

en: Show _options dialog
en_CA: Show _options dialogue

note: Paint tool instructions
en: Pick a color and a brush shape to draw with.
en_CA: Pick a colour and a brush shape to draw with.

en: Choose the picture you want, then click “Open”.
en_CA: Choose the picture you want, then click "Open".

en: Click in the picture to fill that area with color.
en_CA: Click in the picture to fill that area with colour.

en: URL color
en_CA: URL colour

en: The color of the URL's label
en_CA: The colour of the URL's label

en: If true, remote users accessing the desktop are required to be able support encryption. It is highly recommended that you use a client which supports encryption unless the intervening network is trusted.
en_CA: If true, remote users accessing the desktop are required to support encryption. It is highly recommended that you use a client which supports encryption unless the intervening network is trusted.

en: This key specifies the e-mail address to which the remote desktop URL should be sent if the user clicks on the URL in the Remote Desktop preferences dialog.
en_CA: This key specifies the e-mail address to which the remote desktop URL should be sent if the user clicks on the URL in the Remote Desktop preferences dialogue.

en: Unable to send data to child, invalid charset convertor
en_CA: Unable to send data to child: invalid charset convertor

en: Error (%s) converting data for child, dropping.
en_CA: Error (%s) converting data for child: dropping.

en: Error reading PTY size, using defaults: %s.
en_CA: Error reading PTY size: using defaults: %s.

en: Education Applications
en_CA: Educational Applications

en: The file ‘%s’ could not be parsed. Either the file does not exist, or it is not well-formed XML.
en_CA: The file ‘%s’ could not be parsed. Either the file does not exist, or it is invalid XML.

en: The file  ‘%s’ could not be parsed. Either the file does not exist, or it is not a well-formed info page.
en_CA: The file  ‘%s’ could not be parsed. Either the file does not exist, or it is not a valid info page.

en: Generating PDF is not currently supported
en_CA: PDF generation is not currently supported

en: You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
en_CA: You should have received a copy of the GNU General Public Licence along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

en: You must specify a dialog type. See 'zenity --help' for details
en_CA: You must specify a dialogue type. See 'zenity --help' for details
